AEMC instruments 5050 Operating and safety instructions

BATTERY REPLACEMENT FOR AEMC MODELS

1060, 5050, 5060, 5070, 6505, 4630, 6470, 6471 & 6472

The battery should only be replaced by Chauvin Arnoux®Inc. d.b.a AEMC®Instruments or an approved

technician.

NOTE: Replacing the battery causes data to be lost from the instruments memory. It is recommended to

download the memory for Models 1060, 5060 and 5070 before changing the batteries.

Disassembling of the Front Plate Assembly and Protective Cover

To access the battery compartment and service connector:

1. Unscrew the 4 screws accessible from the bottom of the instrument.

2. Remove the instrument from the case. Be careful of the seal ring around the front plate.

3. Unscrew the 2 screws of the battery cover and remove the cover. Carefully lift the battery out and place

next to the battery compartment.

MEMORANDUM

www.ShopAEMC.com

Shop for AEMC products online at: 1.888.610.7664

4. The connector for the battery is inside the bottom cover. Remove the two Torx screws (using a torx

screwdriver # T10) located inside the battery compartment as shown above.

5. The protective cover can now be removed from the front plate. Be careful of the internal connections to J2

(battery cable - 1050) and the power supply cable (1060).

6. Remove the battery connector from the power supply board and replace the new battery in the same

manner.

7. Assemble in the reverse order being carefull not to pinch the wires when assembling the back cover in

place.

8. Turn the instrument to “setup”, reset the default configuration and clears the memory.

9. Charge the new battery until the display indicates “Batt Full”.

www.ShopAEMC.com

Shop for AEMC products online at: 1.888.610.7664

Other manuals for 5050

1

This manual suits for next models

8

Table of contents

Other AEMC instruments Measuring Instrument manuals

AEMC instruments

AEMC instruments MN261 User manual

AEMC instruments

AEMC instruments SR759 User manual

AEMC instruments

AEMC instruments 502 User manual

AEMC instruments

AEMC instruments 6240 User manual

AEMC instruments

AEMC instruments 6505 User manual

AEMC instruments

AEMC instruments 6526 User manual

AEMC instruments

AEMC instruments 407 User manual

AEMC instruments

AEMC instruments 1015 User manual

AEMC instruments

AEMC instruments OX5042 User manual

AEMC instruments

AEMC instruments Chauvin Arnoux 6412 User manual

AEMC instruments

AEMC instruments 403 User manual

AEMC instruments

AEMC instruments K100 User manual

AEMC instruments

AEMC instruments 5070 User manual

AEMC instruments

AEMC instruments 6292 User manual

AEMC instruments

AEMC instruments MN185 User manual

AEMC instruments

AEMC instruments A196-24-BK User manual

AEMC instruments

AEMC instruments JM835A User manual

AEMC instruments

AEMC instruments SR701 User manual

AEMC instruments

AEMC instruments CA7027 User manual

AEMC instruments

AEMC instruments MN312 User manual

AEMC instruments

AEMC instruments AmpFlex User manual

AEMC instruments

AEMC instruments AmpFlex User manual

AEMC instruments

AEMC instruments MN290 User manual

AEMC instruments

AEMC instruments 6505 User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual