ADLINK Technology PCIe-9834 User manual
Advance Technologies; Automate the World.
PCIe-9834
4CH 16-bit 80MS/s Digitizer
PCIe-9834/PCIe-9834P
User’s Manual
Manual Rev.: 2.00
Revision Date: June 3, 2016
Part No: 50-11263-1000
ii
Revision History
Revision Release Date Description of Change(s)
2.00 June 3. 2016 Initial Release
Preface iii
PCIe-9834
Preface
Copyright 2016 ADLINK Technology, Inc.
This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect,
special, incidental, or consequential damages arising out of the
use or inability to use the product or documentation, even if
advised of the possibility of such damages.
Environmental Responsibility
ADLINK is committed to fulfill its social responsibility to global
environmental preservation through compliance with the Euro-
pean Union's Restriction of Hazardous Substances (RoHS) direc-
tive and Waste Electrical and Electronic Equipment (WEEE)
directive. Environmental protection is a top priority for ADLINK.
We have enforced measures to ensure that our products, manu-
facturing processes, components, and raw materials have as little
impact on the environment as possible. When products are at their
end of life, our customers are encouraged to dispose of them in
accordance with the product disposal and/or recovery programs
prescribed by their nation or company.
Conventions
Take note of the following conventions used throughout this
manual to make sure that users perform certain tasks and
instructions properly.
iv Preface
NOTE:
NOTE:
Additional information, aids, and tips that help users perform
tasks.
CAUTION:
Information to prevent minor physical injury, component dam-
age, data loss, and/or program corruption when trying to com-
plete a task.
Information to prevent serious physical injury, component
damage, data loss, and/or program corruption when trying to
complete a specific task.
Table of Contents v
PCIe-9834
Table of Contents
Preface.................................................................................... iii
List of Figures....................................................................... vii
List of Tables.......................................................................... ix
1 Introduction ........................................................................ 1
1.1 Features............................................................................... 1
1.2 Applications ......................................................................... 2
1.3 Specifications....................................................................... 2
1.3.1 Analog Input ............................................................... 2
1.3.2 Timebase.................................................................... 4
1.3.3 Triggers ...................................................................... 4
1.3.4 General Specifications................................................ 5
1.4 Software Support ................................................................. 5
1.4.1 WD-DASK................................................................... 6
1.4.2 LabVIEW Support....................................................... 6
1.5 Device Layout and I/O Array................................................ 7
2 Getting Started ................................................................. 11
2.1 Installation Environment .................................................... 11
2.2 Installing the Module.......................................................... 12
3 Operations ........................................................................ 13
3.1 Functional Block Diagram.................................................. 13
3.2 Analog Input Channel ........................................................ 13
3.2.1 Analog Input Front-End Configuration ...................... 13
3.2.2 Input Range and Data Format .................................. 14
3.2.3 DMA Data Transfer................................................... 15
3.3 Trigger Source and Trigger Modes.................................... 17
3.3.1 Software Trigger ....................................................... 17
vi Table of Contents
3.3.2 External Digital Trigger ............................................. 17
3.3.3 Analog Trigger .......................................................... 18
3.4 Trigger Modes.................................................................... 18
3.4.1 Post Trigger Mode .................................................... 18
3.4.2 Delayed Trigger Mode .............................................. 19
3.4.3 Pre-Trigger Mode...................................................... 19
3.4.4 Middle Trigger Mode................................................. 20
3.4.5 Acquisition with Re-Triggering .................................. 20
3.5 Timebase ........................................................................... 21
3.5.1 Internal Sampling Clock............................................ 22
3.5.2 External Reference Clock (PCIe-9834P only) .......... 22
3.5.3 External Sampling Clock........................................... 22
3.6 ADC Timing Control ........................................................... 23
3.6.1 Timebase Architecture.............................................. 23
3.6.2 Basic Acquisition Timing........................................... 23
3.7 Synchronizing Multiple Modules ........................................ 25
3.7.2 SSI_TRIG ................................................................. 28
3.8 Multi-boot ........................................................................... 28
3.9 Measurement Function API ............................................... 29
A Appendix: Calibration....................................................... 35
A.1 Calibration Constant .......................................................... 35
A.2 Auto-Calibration ................................................................. 35
Important Safety Instructions.............................................. 39
Getting Service..................................................................... 41
List of Figures vii
PCIe-9834
List of Figures
Figure 1-1: Analog Input Channel Bandwidth ............................... 3
Figure 1-2: PCIe-9834 Schematic................................................. 7
Figure 1-3: PCIe-9834 I/O Array ................................................... 8
Figure 3-1: Analog Input Architecture ......................................... 13
Figure 3-2: Linked List of PCI Address DMA Descriptors ........... 16
Figure 3-3: Trigger Architecture .................................................. 17
Figure 3-4: External Digital Trigger ............................................. 18
Figure 3-5: Post-Trigger Acquisition ........................................... 19
Figure 3-6: Delayed Trigger Mode Acquisition............................ 19
Figure 3-7: Pre-Trigger Mode Acquisition ................................... 20
Figure 3-8: Middle Trigger Mode Acquisition .............................. 20
Figure 3-9: Re-Trigger Mode Acquisition .................................... 21
Figure 3-10: PCIe-9834 Clock Architecture .................................. 21
Figure 3-11: Timebase Architecture.............................................. 23
Figure 3-12: Basic Digitizer Acquisition Timing............................. 24
Figure 3-13: Varying Sampling Rates by Adjusting Scan
Interval Counter ........................................................ 24
Figure 3-14: Card Number Configuration Switch .......................... 27
Figure 3-15: Flash Memory Configuration Switch......................... 29
Figure 3-16: Waveform Transition ................................................ 30
Figure A-1: Auto-Calibration Block Diagram ............................... 36
Figure A-2: Auto-Calibration Flow ............................................... 37
viii List of Figures
This page intentionally left blank.
List of Tables ix
PCIe-9834
List of Tables
Table 1-1: Channel Characteristics................................................... 3
Table 1-2: PCIe-9834 I/O Array Legend ........................................... 9
Table 3-1: Input Range and Data Format ....................................... 14
Table 3-2: Input Range FSR and –FSR Values.............................. 14
Table 3-3: Input Range Midscale Values........................................ 15
Table 3-4: Counter Parameters and Description ............................ 25
Table 3-5: SSI Signal Location and Pin Definition .......................... 26
Table 3-6: Card Number Configuration Settings............................. 28
Table 3-7: Measurement Parameters ............................................. 33
x List of Tables
This page intentionally left blank.
This manual suits for next models
1
Table of contents
Other ADLINK Technology Measuring Instrument manuals
