ADA INSTRUMENTS WHEEL 50 DIGITAL User manual

Operating manual

Measuring wheel

Model: WHEEL 50 DIGITAL

Manufacturer: ADAINSTRUMENTS Address: WWW.ADAINSTRUMENTS.COM

WHEEL 50 DIGITAL

MEASUREMENT FOUNDATION 2

ENG

Table of contents

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

3. Buttons and display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

4. Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

5. Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

6. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

7. Exceptions From Responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

MEASUREMENT FOUNDATION

WHEEL 50 DIGITAL

INTRODUCTION

Thank you for your choice of our products. This instrument is easy to use, accurate and reliable.

You can shift between metric and inch systems, store data. Measuring wheel has touch buttons, adjustable handle.

The wheel is covered with rubber to avoid slipping which ensures accuracy of measurement.

APPEARANCE

Handle

LCD display

Measuring wheel

Stand

Buttons

Handle lock

Battery compartment

Spring

WHEEL 50 DIGITAL

MEASUREMENT FOUNDATION 4

BUTTONS AND DISPLAY

Buttons

1. Shift between metric/inch

2. Memory recall

3. LCD display

4. ON/OFF

5. Clear

6. Store data

Display

Low battery indicator

Memory indicator

Metric

Inch

Display data

Before storage After storage Memory full

1 2

MEASUREMENT FOUNDATION

WHEEL 50 DIGITAL

FUNCTIONS

1. ON/OF — Switch

2. М/ft – shift between metrical and imperial size. When one system is selected, the relevant sign is displayed

at the right side of the display. M means metric, ft means imperial.

3. SM – memory. Push this button to store measured data. It will show M1, 2, 3 .......respectively.

4. RM- recall data. When the data is stored you can read the memory from M1 to M5. E.g. if you store 5M in M1,

10M in M2, while the current measured data is 120.7M. When you press the RM button once, it will show the

data of M1 and also “R” sign at the right corner. A few seconds later the display will be back to show the current

measured data again. If you press the RM button twice, it shows the stored data of M2. “R” sign is at the right

corner. In several seconds the display will be back to show the current measured data again.

5. CLR –clear the current measured data. Press this button twice to clear the current measured data.

WHEEL 50 DIGITAL

MEASUREMENT FOUNDATION 6

TECHNICAL DATA

Max measuring range 99999.9 m

Accuracy 0.5%

Resolution 0.1m

Power supply 3V (2хААА/1.5V battery)

Operating temperature -10°С ….+45°С

Diameter of the wheel 159 mm

MEASUREMENT FOUNDATION

WHEEL 50 DIGITAL

WARRANTY

This product is warranted by the manufacturer to the original purchaser to be free from defects in material and workmanship

under normal use for a period of two (2) years from the date of purchase.

During the warranty period, and upon proof of purchase, the product will be repaired or replaced (with the same or similar

model at manufactures option), without charge for either parts of labour.

In case of a defect please contact the dealer where you originally purchased this product. The warranty will not apply to this

product if it has been misused, abused or altered. Withiut limiting the foregoing, leakage of the battery, bending or dropping

the unit are presumed to be defects resulting from misuse or abuse.

EXCEPTIONS FROM RESPONSIBILITY

The user of this product is expected to follow the instructions given in operators’ manual.

Although all instruments left our warehouse in perfect condition and adjustment the user is expected to carry out periodic

checks of the product’s accuracy and general performance.

The manufacturer, or its representatives, assumes no responsibility of results of a faulty or intentional usage or misuse

including any direct, indirect, consequential damage, and loss of profits.

The manufacturer, or its representatives, assumes no responsibility for consequential damage, and loss of profits by any

disaster (earthquake, storm, flood ...), fire, accident, or an act of a third party and/or a usage in other than usual conditions.

The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits due to a change of

data, loss of data and interruption of business etc., caused by using the product or an unusable product.

The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits caused by usage

other thsn explained in the users’ manual.

The manufacturer, or its representatives, assumes no responsibility for damage caused by wrong movement or action due

to connecting with other products.

WARRANTY DOESN’T EXTEND TO FOLLOWING CASES:

1. If the standard or serial product number will be changed, erased, removed or wil be unreadable.

2. Periodic maintenance, repair or changing parts as a result of their normal runout.

3. All adaptations and modifications with the purpose of improvement and expansion of normal sphere of

product application, mentioned in the service instruction, without tentative written agreement of the expert

provider.

4. Service by anyone other than an authorized service center.

5. Damage to products or parts caused by misuse, including, without limitation, misapplication or nrgligence

of the terms of service instruction.

6. Power supply units, chargers, accessories, wearing parts.

7. Products, damaged from mishandling, faulty adjustment, maintenance with low-quality and non-standard

materials, presence of any liquids and foreign objects inside the product.

8. Acts of God and/or actions of third persons.

9. In case of unwarranted repair till the end of warranty period because of damages during the operation of the

product, it’s transportation and storing, warranty doesn’t resume.

For more information you can visit our website:

WWW.ADAINSTRUMENTS.COM

or write the letter with your questions on:

[email protected]

WARRANTY CARD

Name and model of the product _________________________________________________

Serial number ________________date of sale________________________

Name of commercial organization _____________________stamp of commercial organization

Warranty period for the instrument explotation is 24 months after the date of original retail purchase.

During this warranty period the owner of the product has the right for free repair of his instrument in

case of manufacturing defects. Warranty is valid only with original warranty card, fully and clear filled

(stamp or mark of thr seller is obligatory). Technical examination of instruments for fault identification

which is under the warranty, is made only in the authorized service center. In no event shall manu-

facturer be liable before the client for direct or consewuential damages, loss of profit or any other

damage which occur in the result of the instrument outage.

The product is received in the state of operability, without any visible damages, in full completeness. It

is tested in my presence. I have no complaints to the product quality. I am familiar with the conditions

of qarranty service and I agree.

Purchaser signature _______________________________

Before operating you should read service instruction!

If you have any questions about the warranty service and technical support contact seller of this product

Certificate of acceptance and sale

_______________________________________________________________________________________

________________________________________________________________________№_____________

name and model of the instrument

Corresponds to ________________________________________________________________________

designation of standard and technical requirements

Data of issue __________________________________________________________________________

Stamp of quality control department

Price

Sold ___________________________________________________ Date of sale _________________

name of commercial establishment

Table of contents

Languages:

Other ADA INSTRUMENTS Measuring Instrument manuals

ADA INSTRUMENTS

ADA INSTRUMENTS Ruber-X32 User manual

ADA INSTRUMENTS

ADA INSTRUMENTS ZHT 100 User manual

ADA INSTRUMENTS

ADA INSTRUMENTS ProDigit MICRO User manual

ADA INSTRUMENTS

ADA INSTRUMENTS ROTARY 500 HV SERVO User manual

ADA INSTRUMENTS

ADA INSTRUMENTS PRODIGIT MARKER User manual

ADA INSTRUMENTS

ADA INSTRUMENTS COSMO 70eter User manual

ADA INSTRUMENTS

ADA INSTRUMENTS PaintMeter 1500 User manual

ADA INSTRUMENTS

ADA INSTRUMENTS Cosmo 40 User manual

ADA INSTRUMENTS

ADA INSTRUMENTS LASERMARKER 70 User manual

ADA INSTRUMENTS

ADA INSTRUMENTS Vertical User manual

ADA INSTRUMENTS

ADA INSTRUMENTS ZSM 330 User manual

ADA INSTRUMENTS

ADA INSTRUMENTS TOPLINER 3-360 User manual

ADA INSTRUMENTS

ADA INSTRUMENTS ProDigit MICRO User manual

ADA INSTRUMENTS

ADA INSTRUMENTS ProDigit MICRO User manual

ADA INSTRUMENTS

ADA INSTRUMENTS ZHM 125B User manual

ADA INSTRUMENTS

ADA INSTRUMENTS Shooter400 User manual

ADA INSTRUMENTS

ADA INSTRUMENTS AngleMeter 30 User manual

ADA INSTRUMENTS

ADA INSTRUMENTS ARMO MINI User manual

ADA INSTRUMENTS

ADA INSTRUMENTS WHEEL 100 DIGITAL User manual

ADA INSTRUMENTS

ADA INSTRUMENTS 3D Liner 2V Green User manual

ADA INSTRUMENTS

ADA INSTRUMENTS CUBE 360 User manual

ADA INSTRUMENTS

ADA INSTRUMENTS ProDigit MICRO User manual

ADA INSTRUMENTS

ADA INSTRUMENTS ZHT 125 Electronic User manual

ADA INSTRUMENTS

ADA INSTRUMENTS DigiTeo-2 User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual