3scort Escort i-5 User manual
ESCORT. Digital indicator Escort i-5.
User Manual 2022.08-05. Page 2of 53
TABLE OF CONTENTS
TABLE OF CONTENTS
Table of contents 2
1 GENERAL INFORMATION 3
1.1 Device use 3
1.2 Datasheet 3
1.3 Escort i-5 design 5
1.4 Scope of delivery 6
1.5 Packaging 6
2 HOW TO USE 6
2.1 Use guidelines 6
2.2 How to connect i-5 via app 8
2.3 Password 11
2.4 Pairing BLE sensors 13
2.5 Pairing wired sensors (no tracker/gateway) 16
2.6 Pairing wired sensors (tracker/gateway is used) 23
2.7 Tank calibration table for TD-BLE 29
2.8 Configuring Indicator’s screen 35
2.9 Displaying total/average level of several TD sensors 39
2.10 Retransmission of BLE sensors data 43
2.11 Additional features (FW update, password management) 45
3 SERVICE AND SHELF LIFE, WARRANTY 47
4 TRANSPORTATION AND STORAGE 48
5 RECYCLING AND DISPOSAL 49
6 LINKS 49
7 CONTACTS 49
ANNEX 1. Digital indicator Escort i-5: pinout 50
ESCORT. Digital indicator Escort i-5.
User Manual 2022.08-05. Page 3of 53
1 GENERAL INFORMATION
1.1 Device use
Escort i-5 Indicator (hereinafter - ‘Escort i-5’, ‘i-5’, ‘Indicator’, ‘Device’) is designed to
connect the wireless devices manufactured by Escort Monitoring Systems Group (hereinafter - ‘Escort
Group’) with GPS trackers/gateways and other compatible devices, to collect the data of the wireless
and wired devices by Escort Group and display it on its five seven-segment displays.
The wireless Escort BLE sensors can be paired with the i-5 via Bluetooth Low Energy. The
sensors’ readings (such as fuel level, temperature, humidity, angle readings, etc.) are transmitted via
the Bluetooth Low Energy interface and in accordance with the Escort BLE data communication
protocol.
Escort i-5 can poll (send data requests) external devices via the RS-485 and RS-232 interfaces
in accordance with the LLS data communication protocol in case there are no other devices that poll
the devices connected to the same RS-485 or RS-232 network. In other cases the Indicator can be
configured to ‘listen’ the communication between a polling device and polled devices (such as wired
sensors).
Escort i-5 can transmit the data it receives from Escort BLE sensors via Bluetooth Low Energy
interface to an external device once polled via the RS-485 or RS-232 interface. In 2...5 ms
upon receiving a request from such external device, the i-5 transmits the data previously transmitted to
it by Escort BLE sensors in accordance with the LLS data communication protocol. Escort i-5 can
respond to the requests sent only to the RS-485 and RS-232 network addresses saved in its memory.
1.2 Datasheet
The main technical specs are stated in the Table 1 below
Table 1. Escort i-5 Technical specs
Spec
Value
Power supply voltage, V
9 ... 36
Power consumption, not more than (mA)
150
Wired communication interfaces (for connection with GPS
trackers/gateways and wired sensors)
Data exchange protocol(s)
Data exchange baud rate
RS-485, RS-232
LLS
19200 bps
ESCORT. Digital indicator Escort i-5.
User Manual 2022.08-05. Page 4of 53
Wireless sensor/mobile device communication interface(s)
Wireless sensor and mobile device communication protocol(s)
Bluetooth LE (BLE)
Escort BLE
ESCORT.i-5
Bluetooth Standard
Bluetooth Low Energy 5 LR
coded PHY (central)
Bluetooth Low Energy 4
(connection, advertising)
Receiver sensitivity / transmitter power, dBm
-96 / 8
Table 1 continuation
Spec
Value
Bluetooth operating frequencies, GHz
2.402 … -2.480
Max sensors:
10
Max LLS network addresses
40
Max number of lines per tank calibration table
50
Max fuel/liquid level, in any measurement units
99999
Ingress protection marking in accordance with ГОСТ (State
Standard) 14254
IP65
Electric shock resistance rating in accordance with ГОСТ (State
Standard) 12.2.007.0
Class III
Operating conditions:
- min and max ambient temperature, °С;
- extreme min and max ambient temperature, °С;
- atmosphere pressure, GPa
- from -40 °С to 50 °С
from -45 °С to 55 °С
from 840 to 1067
Dimensions, not more than, mm
4001x 70,5 x 22,2
Weight, not more than, kg
0.3
1Including the length of the cable
ESCORT. Digital indicator Escort i-5.
User Manual 2022.08-05. Page 5of 53
1.3 Escort i-5 design
Figure 1 demonstrates the design if the Escort i-5 indicator.
Fig. 1 Escort i-5 design
ESCORT. Digital indicator Escort i-5.
User Manual 2022.08-05. Page 6of 53
1.4 Scope of delivery
The scope of delivery is indicated in the Table 2.
Table 2. The kit contents
Device designation:
Qty
Ser.№
Note
Digital indicator Escort i-5 User Manual
ТЕМГ.468389.001
1
Digital indicator Escort i-5 Datasheet.
468389.001 ПС
1
To be specified while
ordering
Installation kit ТЕМГ.416931.011:
1
Packaging ТЕМГ.465966.001
1
1.5 Packaging
The Indicator i-5 along with its passport and installation kit is packaged in a semi-rigid
(corrugated board) box. The installation kit is packaged in ZIP-bags.
Fig.2. Example of the i-5 installation
ESCORT. Digital indicator Escort i-5.
User Manual 2022.08-05. Page 7of 53
2HOW TO USE
2.1 Use guidelines
2.1.1 The Indicator Escort i-5 must be operated in accordance with the following documents:
− Digital indicator Escort i-5 User Manual ТEМГ.468389.001 РЭ
− Digital indicator Escort i-5 Datasheet ТEМГ.468389.001 ПС
2.1.2 The company or an individual that has purchased the Digital indicator Escort i-5 must
ensure that the device is stored, installed and operated in accordance with the requirements stated in
the Datasheet and User Manual of the Device.
2.1.3 The Device must be installed and operated only by the authorized staff who have read the
Datasheet and User Manual.
2.1.4 After transporting the Device at negative temperatures exceeding the operating
temperature range and before unpacking the Device, it needs to stay inactive in an environment with
normal operating temperatures (20 ± 10 °C) for no less than 4 hours. After unpacking the Device, it is
required to check the presence of all items of the installation kit in the package as well as to examine
the Devices for any signs of damage.
2.1.5 DO NOT USE THE DEVICE UNDER THE OPERATING CONDITIONS
DIFFERENT FROM THE STATED IN THE DATASHEET OF THE DEVICE AND IN THE
ART 1.2 OF THE USER MANUAL!
2.1.6 AVOID ANY DAMAGE TO THE DIGITAL INDICATOR ESCORT i-5, ITS
PARTS OR WIRES DURING THE INSTALLATION AND OPERATION!
2.1.7 The Indicator i-5 is not subject to any repairs by a customer and must be sent to the
manufacturer for repairs or replacement in case of a malfunction.
2.1.8 The most common way to mount the Indicator i-5 is by means of self-tapping screws.
To mount the i-5 onto a surface, drill 4 orifices as shown on the Figure 4 at a spot, where it will
be possible to connect the wires of the i-5 to an external device or devices and a power supply and
where the readings displayed by the Indicator will be clearly visible.
Mount and fix the holder with the self-tapping screws. Place the Escort i-5 into the holder.
Figure 3 demonstrates an example of the suggested installation. Figure 4 provides the fitting
dimensions.
ESCORT. Digital indicator Escort i-5.
User Manual 2022.08-05. Page 8of 53
Fig. 3 Approximate example of mounting the i-5
Fig. 4 Fitting dimensions
2.2 How to connect i-5 via app
2.2.1 Make sure that your smartphone supports BLUETOOTH LE (BLE 4.0 or higher) by
checking its documents. Enable the geolocation service in the settings of your smartphone.
2.2.2 Install and run the Escort Configurator app.
2.2.3 On the start screen (Fig. 5) select “Sensor settings”, then select the model of the Device
(Fig. 6).
ESCORT. Digital indicator Escort i-5.
User Manual 2022.08-05. Page 9of 53
Fig. 5 Start screen
Fig. 6 Device model selection
2.2.4 When firing the app up for the 1st time, make sure to give it access to the geolocation
service. This access is asked for only once. This step is obligatory to connect any BLE devices.
2.2.5 On the List of available devices screen (Fig. 7), tap on the required device or search for
it by entering the last six digits of the serial number of the device into the search box (Fig. 8) for
example I5_100320 (in case of the i-5).
ESCORT. Digital indicator Escort i-5.
User Manual 2022.08-05. Page 10 of 53
Fig. 7 List of available devices
Fig. 8 Searching by the last 6 digits of the serial
number
Table of contents
