Zida P845SD User manual

USER’S
MANUAL
More compatible, more functional and more competitive.
Excellent quality and faster response.
Supporting Intel Pentium IV FC-PGA2 Processor in the 478Pin package.
UDMA33/66/100, PC133 SDRAM
Quality, Performance Mainboards

No part of this manual, including the products and software described in it, may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form or by any means, except documentation kept by the purchaser for
backup purposes, without the express written permission of MANUFACTURER.
MANUFACTURER PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.
IN NO EVENT SHALL MANUFACTURER, ITS DIRECTORS, OFFICERS, EMPLOYEES
OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND
THE LIKE), EVEN IF MANUFACTURER HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THlS MANUAL
OR PRODUCT.
Products and corporate names appearing in this manual may or may not be registered
trademarks or copyrights of their respective companies, and are used only for
identification or explanation and to the owners benefit, without intent to infringe.
Intel, Celeron, Pentium are registered trademark of Intel Corporation.
Intel is a registered trademark of Intel Corporation.
IBM, IBM PC, IBM PC/AT, PC-DOS, OS/2 and OS/2 WARP are registered trademarks
of International Business Machines Corporation.
Ms-DOS, Windows, Windows NT, Windows 95, Windows 98, Windows 2000 and
WindowsME are registered trademarks of Microsoft Corporation.
AMI BIOS is a product of American Megatrends, Inc.
AWARD BIOS is a product of Award Software Inc.
Third-party brands and names mentioned in this User’s Manual are the property of
their respective owners.
The product name and revision number are both printed on the board itself. Manual
revisions are released for each board design represented by the digit before and after
the period of the manual revision number. Manual updates are represented by the third
digit in the manual revision number.
SPECIFlCATlONS AND INFORMATION CONTAINED IN THIS MANUAL ARE
FURNISHED FOR INFORMATION USE ONLY, AND ARE SUBJECT TO CHANGE
AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS
A COMMITMENT BY MANUFACTURER. MANUFACTURER ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT
MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE
DESCRIBED IN IT.
Copyright © 2001 Manufacturer All Rights Reserved.
Manual Revision: 1.00 Release Date: August 2001
Part No: 90-P845SD1-00-00
Page 2 Mainboard User's Manual

Contents
Table Of Contents
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Fast Start Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Checking the Package Contents . . . . . . . . . . . . . . . . . . . . .7
Mainboard Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Jumper Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7 Quick Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Installing the CPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Installing the Memory . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Attaching ATX Power Supply . . . . . . . . . . . . . . . . . . . . 14
Floppy Disk Drive Connector . . . . . . . . . . . . . . . . . . . . 15
IDE Device Connector . . . . . . . . . . . . . . . . . . . . . . . . . 15
Mounting Mainboard to chassis . . . . . . . . . . . . . . . . . . 16
Installing Add-in Boards . . . . . . . . . . . . . . . . . . . . . . . . 17
BIOS Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
CD Driver & Software Installation Guide . . . . . . . . . . . . . . 52
Norton AntiVirus OEM Version Setup Guide . . . . . . . . .. 53
INSTANT ON Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Mainboard User's Manual Page 3
Table of Contents


Overview
Thank You for purchasing our High Performance Mainboard.
Our advanced technology mainboard is designed for processing
speeds of 1.7G or above and is upgradeabled for future
processors.
The Intel Mainboard Utilizes 82845 and ICH2 chipset provide
an Integrated Bus Mastering IDE controller with two high
performance IDE interfaces for up to four UDMA IDE devices
(hard drives, or CD-ROM's). The LPC(Low-pin count) I/O
controller integrates a floppy drive interface, two enhanced
16C550 compatible serial ports, one parallel port and one
consumer infra red compatible interface.The ICH2 I/O controller
integrates two USB 1.1 compliant controllers.
Intel 845 chipset support Pentium IV FC-PGA2 Processor on
the 478Pin Package. with 133 SDRAM DIMM.
Two DIMM slots support up to 2GB Memory Capacity.
WAKEUP-LINK Header supports Wake-On-LAN.
Integrated AC97 2.1 Compliant Codec with 3D Stereo
enhancement (optional). Award 2M bits Firmware Hub compliant
with PC99,ACPI/DMI power management.
Micor ATX 245mm X 211mm.
Mainboard User's Manual Page 5
Overview

Page 6 Mainboard User's Manual
Fast Start
Installation
This section will aid you in quickly setting up the Mainboard.
Be sure to take caution to avoid personal injury or damage
to wiring due to sharp pins on connectors, printed circuit
assemblies, rough edges and corners and hot components.
Your Location Requirements Are:
• A sturdy, level surface for placement
• Space allowance around mainboard
• A stable environment with no abrupt temperature or humidity
changes
• No exposure to chemicals or direct sunlight
• Line voltage and frequency not varying more than + or -10% from
the value stated on the package or nameplate (located on the
back, opposite the power plug)

Checking
The Package Contents
Remove the items from the box and make sure you have
the following items before beginning. If any of the items
below are missing, please contact the representative for part
replacement.
Micro ATX Box Standard Package
1) Mainboard
2) Driver CD with Norton AntiVirus 2001 OEM Version
3) User Manual
4) IDE Hard Drive Ribbon Cable
5) Floppy Drive Ribbon Cable
Installation
Mainboard User's Manual Page 7

Page 8 Mainboard User's Manual
Mainboard
Diagram

Before we begin installing your series Mainboard, we have provided you with a diagram of the Mainboard to
help you locate the appropriate “connectors”. The letters below describe the key Mainboard components.
Page number in the right hand column will direct you to detailed description of the component.
P845SD
Option : AC97 2.1 Compliant 3D Audio
Onboard
COMPONENT PAGE
A- PS/2 Mouse & Keyboard Connector . . . . . . . . . . . . . . . . . . 45
B- ATX Power Supply + 4Pin extend +12V Connector . . . . . . 45
C- Universal Serial Bus (USB) Connector . . . . . . . . . . . . . . . 46
c- Universal Serial Bus (USB) Header . . . . . . . . . . . . . . . . . . 46
D- Serial (COM1 & 2) Connector . . . . . . . . . . . . . . . . . . . . . . . 46
E- Infra-Red (IR) Header . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
F- Memory Module Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
G- Parallel Port Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
H- Accelerated Graphics Port (AGP) Connector . . . . . . . . . . 48
I- Lithium Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
J- PCI Add-in Board Connector . . . . . . . . . . . . . . . . . . . . . . . 48
M- Front Panel Function Connector . . . . . . . . . . . . . . . . . . . . . 48
N- Flash BIOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
O- Floppy Drive Header . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
P- IDE Device Header . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Q- WAKEUP-LINK Header . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
r- CNR add-in Board Connector . . . . . . . . . . . . . . . . . . . . . . . 50
S- CPU Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
T- CPU / SYSTEM & AUXILIARY FAN Connector . . . . . . . . . 50
U- Audio & Joystick Connectors . . . . . . . . . . . . . . . . . . . . . . . 51
X- CD Audio Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Y- Auxiliary Audio Connector . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Mainboard User's Manual Page 9
Installation

Page 10 Mainboard User's Manual
Jumper settings
Set the Jumper
JP2 [1-2] Normal; [2-3] to clear CMOS.
Table of contents
Other Zida Motherboard manuals
































