Xerox Integrated Fiery Color Server User manual

Quick Start Guide

Addendum for Xerox

Integrated Fiery Color Server

For the

Xerox Color 550 Production Printer

August 2010

45084799

CONFIGURATION TRAINING GUIDE 8/09 1-1

Module 1

Introduction

Module overview

This Introduction Module will provide you with an overview of this

training program. Information on the Fiery will be referenced to the

Installation and Service Guide

Module objectives

By the end of this module you will be able to do the following:

Identify required training modules

Locate information on the Integrated Fiery Color Server in

the Installation and Service Guide

Describe Integrated Fiery Color Server features

Identify Integrated Fiery Color Server hardware

specifications

Identify Integrated Fiery Color Server network connectivity

Describe how the Integrated Fiery Color Server operates

INTRODUCTION Integrated Fiery Color Server

1-2 8/09 CONFIGURATION TRAINING GUIDE

Training overview

This course is designed for both the Xerox Analyst and the Service

Representative.

For Xerox Analysts, Module 2: Configuration of the Integrated Fiery

Color Server is required and Module 3: Servicing the Integrated

Fiery Network Controller is optional.

If you are a Xerox Service Representative, Module 2: Configuration

of the Integrated Fiery Color Server is optional and Module 3:

Servicing the Integrated Fiery Color Server is required.

Course Prerequisites

The Xerox Service Representative training prerequisites for this

course include the following:

Color Basic (C10500)

Network Continuum Basic (C7166)

Introduction to Digital (C9250)

Laser Safety Training Program (772P20441)

PWS/PSS Skills Knowledge

Ishihara Color Test (C1124)

These training prerequisites are available via Xerox eLearning and

can be located by searching the short code for each prerequisite

(i.e., the short code for Color Basic is C10500).

In addition, The Xerox Service Representative is required to have

the following hardware and software:

A Personal Work Station (PWS) configured with Xerox

Golden Image

Internet Explorer v. 6.0

Minimum 500 MB free space on your C: drive

Laptop with a Network Interface Card (NIC) installed

If you do not meet all of these prerequisites, call your instructor over

to discuss a recovery plan. This may include evening or post-

school work to complete all of the requirements. In rare cases it

might mean that you should not take the present course until some

later date.

Integrated Fiery Color Server INTRODUCTION

CONFIGURATION TRAINING GUIDE 8/09 1-3

Introduction to the Integrated Fiery Color Server

The Fiery is a high-performance color controller that adds computer

connectivity and highly efficient color printing capability to digital

color copiers. It is optimized for high-speed communications,

processing, rasterization, and printing of continuous tone color and

monochrome (black and white) pages. Users can print from

networked Mac OS computers and from networked PCs running

Windows. In addition, the Fiery USB-Type A ports allow printing

directly from a USB device.

Features

As an integral part of the printing system, the Integrated Fiery Color

Server enables users to:

Send images over AppleTalk, TCP/IP, and Novell

networks, or through a USB device to print on a copier.

Spool print jobs and select a printing priority for each job.

Users can control spooled print jobs sent to the Fiery with

user software running on networked Mac OS computers

and PCs.

Print files in color, grayscale, and black and white.

Use the copier as a high-resolution color scanner with

Remote Scan utility.

Use 136 resident fonts (117 Adobe Type 1 PostScript fonts

with Euro Currency support, and 19 TrueType fonts), plus

two Adobe Multiple Master fonts used for font substitution

when printing PDF files. WebTools or the Command

WorkStation can be used to download additional fonts.

Use built-in ColorWise™ color management and

NetWise™ networking features.

Specifications

The Integrated Fiery Color Server Hardware specifications include:

Celeron M440 Solo Intel 1.86GHz CPU

512 MB Memory (minimum)

80GB SATA hard disk drive (minimum)

Three USB-Type A ports for printing through a USB device

Supports AppleTalk and TCP/IP protocols simultaneously

Ethernet port for twisted pair

(10BaseT/100BaseTX/1000BaseT) network connection

INTRODUCTION Integrated Fiery Color Server

1-4 8/09 CONFIGURATION TRAINING GUIDE

Network Connectivity

When the Fiery is connected to a network, it behaves as a

networked printer. The Fiery supports the following network

protocols (rules that enable computers on a network to

communicate with each other):

AppleTalk, Bonjour

TCP/IP, which also includes the BOOTP, DHCP, FTP, HTTP,

IMAP, IPP, IPv4, IPv6, LDAP, LPD, NBT, POP3, Port 9100,

SMB, SMTP, SNMP, SNTP, SSL/TLS, 802.1x and IPSec

protocols

These protocols can run concurrently on the same cable.

Computers that use other protocols can print through a server that

uses one of the supported protocols. The Fiery is autosensing, and

handles all connections simultaneously. This information needs to

be managed by a local administrator.

How the Fiery Network Controller Operates

To gain an understanding of how the Fiery Color Server Operates,

consult the Integrated Fiery Color Server for the WC 7700 Series

MFP Installation and Service Guide, Introduction.

Service Documentation

This training document is intended to provide general procedures.

For specific detailed procedure, refer to your service

documentation.

Integrated Fiery Color Server INTRODUCTION

CONFIGURATION TRAINING GUIDE 8/09 1-5

Module Summary

This module provided you with an overview of this training program

and the Integrated Fiery Color Server.

Review the objectives at the beginning of the module. If you do not

feel comfortable with you ability to perform any objective, review the

materials for that objective.

INTRODUCTION Integrated Fiery Color Server

1-6 8/09 CONFIGURATION TRAINING GUIDE

Notes

CONFIGURATION TRAINING GUIDE 8/09 2-1

Module 2

Configuration of the Integrated

Fiery Color Server

Introduction

Module overview

This Module (Configuration of the Integrated Fiery Color Server)

provides you with information on how to setup the Integrated Fiery

Color Server Procedural information on configuring the Integrated

Fiery Color Server will be referenced to the Integrated Fiery Color

Server Configuration Guide

Module objectives

By the end of this module you will be able to do the following:

Use the Fiery Installation Instructions for Xerox Color 550

Production Printer as a resource.

Use the Integrated Fiery Color Server Configuration Guide

as a resource.

Prepare the Integrated Fiery Color Server for Setup.

Setup the Integrated Fiery Color Server from the Copier

Touch Panel.

Setup the Integrated Fiery Color Server from a network

computer.

CONFIGURATION Integrated Fiery Color Server

2-2 8/09 CONFIGURATION TRAINING GUIDE

Preparing for Fiery Setup

Basic Installation of Fiery to the Xerox Color 550

Production Printer

Consult the Fiery Installation Instructions for the Xerox Color 550

Production Printer, section: Basic Installation for information on

setting up the Fiery to connect to the WorkCentre 7700 Series

MFP.

Network Switch Connection the Fiery to the Xerox Color

550 Production Printer (Optional)

Consult the Fiery Installation Instructions for the Xerox Color 550

Production Printer, section: Network Switch Connection (Optional)

for information on setting up the Fiery to connect to the Xerox Color

550 Production Printer using a Network Switch (purchased

separately).

Preparing for Fiery Network Setup

Fiery on the Network

Consult the Fiery Network Controller for Xerox Color 550

Production Printer Configuration and Setup Guide, section:

Connecting to the Integrated Fiery Color Server on the Network for

information on connecting the Fiery to a network.

Preparing for Fiery Setup

Consult the Integrated Fiery Color Server for Xerox Color 550

Production Printer Configuration and Setup Guide, section:

Preparing for Fiery Controller Setup for information on configuring

the Fiery. Topics covered in this section include: Levels of access

and control, Fiery Print Connections, and WebTools.

Setup

Setup configures the Fiery to communicate with other devices and

to manage print jobs. Perform Setup the first time you turn on the

Fiery after new system software is loaded, or any time Server

software is reinstalled. When the network or user printing

environment changes, change the Fiery options accordingly.

Integrated Fiery Color Server CONFIGURATION

CONFIGURATION TRAINING GUIDE 8/09 2-3

NOTE: You cannot access Setup functions from Command WorkStation,

Macintosh Edition.

Setup from the copier touch panel

To setup the Fiery from the Copier touch panel, consult the

Integrated Fiery Color Server for Xerox Color 550 Production

Printer Configuration and Setup Guide, section: Setting up the

copier, EFI Xerox Color 550 Config.

Setup from a network computer

To set up the Fiery from a network computer, consult the Integrated

Fiery Color Server for Xerox Color 550 Production Printer

Configuration and Setup Guide, section: Setting up the Fiery

Controller from a network computer.

Setting up the Fiery from a network computer

After you perform initial Setup from the copier touch panel, you can

change most Setup options from a network computer by using

Configure. To use Configure from a network computer, you must

know the Fiery Administrator password.

This manual suits for next models

Table of contents

Other Xerox Software manuals

Xerox

Xerox 701P91273 User manual

Xerox

Xerox WorkCentre Pro 232 Installation and operation manual

Xerox

Xerox DocuColor 2045 Programming manual

Xerox

Xerox 850DP - Phaser Color Solid Ink Printer Service manual

Xerox

Xerox Wide Format 6050 Setup guide

Xerox

Xerox DC 220 ST Assembly instructions

Xerox

Xerox DocuColor 6060 User manual

Xerox

Xerox Phaser 6115 User manual

Xerox

Xerox DocuShare 6.0 User manual

Xerox

Xerox 850DP - Phaser Color Solid Ink Printer User manual

Xerox

Xerox DocuColor 250 Reference guide

Xerox

Xerox 6100BD - Phaser Color Laser Printer Operating instructions

Xerox

Xerox C8 - DocuPrint Color Inkjet Printer User manual

Xerox

Xerox 2121L - FaxCentre B/W Laser User manual

Xerox

Xerox DocuColor 8000 Manual

Xerox

Xerox Wide Format 6204 User manual

Xerox

Xerox Wide Format 6030 User manual

Xerox

Xerox DocuPrint 115 Parts list manual

Xerox

Xerox 6100BD - Phaser Color Laser Printer Parts list manual

Xerox

Xerox Scan to PC Desktop Professional User manual

Xerox

Xerox 850DP - Phaser Color Solid Ink Printer User manual

Xerox

Xerox DocuSP User manual

Xerox

Xerox WORKCENTRE C2424 User manual

Xerox

Xerox 6100BD - Phaser Color Laser Printer User manual

Popular Software manuals by other brands

COMPRO

COMPRO COMPROFM manual

Muratec

Muratec OFFICEBRIDGE ONLINE user guide

Oracle

Oracle Contact Center Anywhere 8.1 installation guide

Adobe

Adobe 65007312 - Photoshop Lightroom Programmer's guide

Avaya

Avaya NULL One-X for RIM Blackberry user guide

HP ProLiant BL420c user guide

PS Audio

PS Audio PowerPlay Programming manual

Brady

Brady LOCKOUT PRO 3.0 Administrator's guide

Avaya

Avaya Interaction Center user guide

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Guide book

Novell

Novell GROUPWISE 8 - INTERNET AGENT manual

Oracle

Oracle Application 9i Configuration guide

Acer

Acer RDM user guide

Canon

Canon Vixia HF21 instruction manual

Canon

Canon ZR950 instruction manual

Samsung

Samsung Auto Backup user manual

Polycom

Polycom Vortex EF2201 Application note

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c user manual