Xerox 850DP - Phaser Color Solid Ink Printer Instruction Manual

XEROX FreeFlow

AccXES Firmware

10.3.3 b 106

(for HFT, PUN, CNG

Controllers)

June, 2006

Table of Contents

1Introduction 4

1.1 FEATURE KEYS: 4

1.1.1 Feature Key Descriptions 4

2Release Deliverables 6

2.1 Xerox 6030/6050 Wide Format Solution 6

2.2 Xerox 8850, 510dp Print Systems 6

2.3 Xerox Print System 721p 6

2.4 Xerox 8825, 8830 Print Systems 6

2.5 Xerox Print System X2 TECH 7

3Recommended Configurations 8

4Release Installation 9

5New Features of 10.3.3 b 106 10

5.1 Additional Postscript functionality 10

5.2 Postscript Interpretation level for PDF 10

5.3 Support for new IOT firmware releases 10

5.4 880mm paper support for 6030 and 6050 10

6New Features of 10.3.2 b 201 11

6.1 Title-block setting removed from Scanner UI menu (10.3.1) 11

6.2 Remote Media Mismatch for 6030/6050 (10.3.1) 11

710.0-10.2 Feature Enhancements 12

7.1 Turbo III speeds supported for Scan-To-Net 12

7.2 Check Plot checkbox 12

7.3 Copier Margin range increased to +/- 8 inches 12

7.4 Disk Logging setting added to WebPMT 12

7.5 Added support for 440, 620 and 880mm rolls for 6030/6050 printers 12

7.6 Support for 30 inch roll on 6030/6050 printer 13

7.7 Disk Image Overwrite 13

7.8 Scan to FTP 13

7.9 Maximum Copy Length 13

8Release Notes 14

8.1 Controller 14

8.1.1 Disk Image Overwrite 14

8.1.2 Firmware Installation of a Device Failed 19

8.1.3 Blank Pages after Firmware Installation 19

8.1.4 Stamp does not appear 19

8.1.5 Scaling interaction with “ANY” 19

8.1.6 Margins may cause image clipping 19

8.1.7 CGM Files and folding 19

8.1.8 Image wrap on 721 printer 19

8.2 Xerox 6030/6050 Wide Format Solution 20

8.2.1 Long Plotting 20

8.2.2 Long Copying 20

8.2.3 Out of Toner reported as “printer needs attention” 20

8.3 Scanner 20

8.3.1 Clear Last Image 20

8.3.2 Invert Feature and Recall Last Job 20

8.3.3 Upgrade Test Print 21

8.3.4 Scan-to-Print and Margins 21

8.3.5 Width Detection Sensors and Finishing 21

Page 2

8.3.6 Background Suppression 21

8.3.7 Scaling shaded documents 21

8.3.8 50000015 errors while copying 21

8.3.9 Recalling sets 21

8.3.10 Washed out documents when scanning/copying 21

8.4 AccXES Client Tools 22

8.4.1 Manual feed media source 22

8.5 Web Print Manager Tool (WebPMT) 22

8.5.1 Printer Queue – Main WebPMT Screen 22

8.5.2 Netscape 6.1 users only 22

8.5.3 Netscape 7.0 users only 22

8.5.4 German users only 22

8.5.5 Large Scaling Factors 23

8.5.6 Pen Palettes 23

8.5.7 HPGL Page – End of File 23

8.5.8 Display of Media Usage 23

8.5.9 Saved Parameter Settings 23

8.5.10 Default PostScript Page Size 24

8.5.11 String value of “0” in Text Fields 24

8.5.12 “Printer has been updated” message 24

8.5.13 Pen Patterns 24

8.5.14 Printer Password 25

8.5.15 Print Job Priority 25

8.5.16 Date and time shift position after update 25

8.6 Netscape and Unix 25

9Customer Issues Resolved 26

9.1 The following Customer issues were resolved in 10.3.3. b 106 26

9.2 The following Customer issues were resolved in 10.3.3. b 106 26

9.3 The following Customer issues were resolved in 10.3.2 b 201 26

9.4 The following Customer issues were resolved in 10.3.1 b 220 27

9.5 The following Customer issues were resolved in 10.2 b 141 28

9.6 The following Customer issues were resolved in 10.1 b 118 29

9.7 The following Customer issues were resolved in 10.1 b 116 30

10 Appendix 31

10.1 Controller Installation for Xerox Wide Format Solution 31

10.1.1 AccXES Client Tools 31

10.1.2 WebPMT 31

10.1.3 Unix 31

Page 3

1 Introduction

The AccXES Controller Firmware Release 10.3.3 b 106 provides multinational software for the

Xerox 6030/6050 Wide Format Solution, Xerox Wide Format Print Systems 8825, 8830, 8850,

510dp, 721p, and for the Xerox Wide Format Scan System. The languages supported are

English, Deutsch, Espanol, Francais, Italiano, Portugues, and Russian.

This document presents the following information about the AccXES Controller Release 10.3.3

build 106.

•

Release deliverables

Recommended configurations

Installation procedures

Present supplemental information and known issues that are not mentioned in the published

customer user documentation.

New features

1.1 FEATURE KEYS:

Feature keys from before version 9.0 B180 are no longer useable with version 10.3.3 b 106

firmware. New keys must be acquired from the Xerox website to use your system.

Downgrading below 9.0 B 180 will also require you to re-download your feature keys. This

applies to AccXES controller resident feature keys only: Postscript, Job Accounting, Scan to

Net, and Scan to Print.

1.1.1 Feature Key Descriptions

Print and Copy Feature Keys are standard with AccXES 10.3.3 build 106 firmware for all printers

except the Xerox 6030/6050 Wide Format.

Additionally, the following functions will be unavailable until the appropriate feature key is

loaded.

•Job Accounting Enables tracking media usage data for print, scan and copy jobs.

Account Management Tool, or some other external accounting tool, is used to assign

User Id, Account Id, Printer Id associations, then collects and tallies the stored data from

the printers)

•PostScript – Enables the interpretation of Adobe Postscript 3 and PDF 1.3 files.

•Disk Image Overwrite – Enables the security options for overwriting image data on the

hard drive.

•Xerox Wide Format Scanner Features:

Scan to Net - To create an electronic file from a scanned image.

Page 4

Scan to Print - To scan, create a preview, and send the scanned image to the printer.

Must also have Scan-to-Net is present.

Color Enablement – AccXES - Allows color scanning when scan to net license is present.

Speed Enhancement Turbo II – AccXES - Enables 4 IPS scan speed for 36” wide.

Speed Enhancement Turbo III – AccXES – Enables 7.33 IPS Scanning on HFT/PUN model

controllers only

•Xerox 6030/6050 Wide Format Printer

Print Server Enablement – Enables print and copy mode for remote printer.

For more information on Feature Keys, see the Feature Key Instructions and Coupon Exchange

screens on the www.xes.com/keys website.

Page 5

2 Release Deliverables

2.1 Xerox 6030/6050 Wide Format Solution

The following executable is provided for the Xerox 6030/6050 Wide Format Solution and

supports the Xerox Wide Format Scan System.

HFT Controller – HFT_6030_10_3_3b106.disk.bin (file size = 7,736,382 bytes)

PUN Controller – PUN_6030_10_3_3b106.disk.bin (file size = 7,736,382 bytes)

2.2 Xerox 8850, 510dp Print Systems

The following executables are provided for the Xerox Wide Format Print System 8850 and

510dp and support the Xerox Wide Format Scan System scanner.

HFT Controller – HFT_8850_10_3_3b106.disk.bin (file size = 7,639,614 bytes)

HFT Controller – HFT_510dp_10_3_3b106.disk.bin (file size = 7,639.614 bytes)

PUN Controller – PUN_8850_10_3_3b106.disk.bin (file size = 7,639,614 bytes)

PUN Controller – PUN_510dp_10_3_3b106.disk.bin (file size = 7,639,614bytes)

CNG Controller – CNG_8850_10_3_3b106.disk.bin (file size = 10,319,876 bytes)

2.3 Xerox Print System 721p

The following executables are provided for the Xerox Wide Format Print System 721p and

support the Xerox Wide Format Scan System scanner.

HFT Controller – HFT_721p_10_3_3b106.disk.bin (file size =7,599,959 bytes)

PUN Controller – PUN_721p_10_3_3b106.disk.bin (file size = 7,599,959 bytes)

2.4 Xerox 8825, 8830 Print Systems

The following executables are provided for the Xerox Wide Format Print System 8825, 8830

and support the Xerox Wide Format Scan System scanner.

NOTE: You must load version 9.0 before loading this Firmware

Page 6

HFT Controller – HFT_8830_10_3_3b106.disk.bin (file size = 7,640,368 bytes)

PUN Controller – PUN_8830_10_3_3b106.disk.bin (file size = 7,640,368 bytes)

CNG Controller – CNG_8830_10_3_3b106.disk.bin (file size = 10,319,876 bytes)

N5T Controller – N5T_8830_10_3_3b106.disk.bin (file size = 10,319,876 bytes)

2.5 Xerox Print System X2 TECH

The X2 TECH is no longer supported.

Page 7

3 Recommended Configurations

Table 1: Minimum (Min.) and Recommended (Rec.) RAM Configurations (MB)

F5Y, EV4, KLF, and UP8 controllers are no longer supported.

CNG/N5T Controller HFT/PUN Controller

System Min. Rec. Min. Rec.

8825, 8830, 8850 128

192

128

256

510, 6030, 6050 N/A N/A 128

256

721 N/A N/A 512

512

Page 8

4 Release Installation

NOTES:

Feature keys from before version 9.0 B180 are no longer useable with version 10.3.3

firmware. New keys must be acquired from the Xerox website to use your system.

Downgrading below 9.0 B 180 will also require you to re-download your feature keys.

The AccXES Revision MUST be 9.0 or higher to upgrade to 10.3.3. If your current version is

lower than 9.0, you must install 9.0 or higher before upgrading to 10.3.3.

Regarding scanner firmware revisions: If you are upgrading the firmware of a system

containing a Xerox Wide Format Scanner, you must also ensure that the scanner firmware is

upgraded, prior to upgrading the controller, to the following version:

Xerox Wide Format Scanner – version 2.2.4 or greater. Version 3.2.6 or greater

needed for full functionality.

Xerox 7356 and 7346 Scanners are no longer supported.

Page 9

5 New Features of 10.3.3 b 106

Version 10.3.3 build 106 is intended to be a SPAR release for the HFT, and PUN controllers.

The following features were added as part of those SPAR fixes.

5.1 Additional Postscript functionality

Versions of FreeFlow Accxes prior to 11.3 did not apply the Accxes contrast/lightness settings to

PDF or PostScript prints. These settings may now be used to adjust contrast and lightness on

PDF and PostScript prints.

The internal selection of tone curves and halftone screens for PostScript/PDF files has been

improved for certain document types

5.2 Postscript Interpretation level for PDF

This allows users to control technical details of how PDF files are printed. All PDF files are

internally converted to PostScript for printing. This new selection (on the Postscript emulations

tab in WebPMT) allows a choice between conversion to PostScript Level 2 or PostScript 3. Prior

versions of Accxes had always converted to PostScript 3. Setting this selection to "2" may allow

certain files to print. However, it may also prevent other PDF files from printing; the default

setting of 3 should always be chosen unless specific PDF printing problems arise.

5.3 Support for new IOT firmware releases

Support was added for the new releases of the following IOT firmware versions:

721: 01.05.00

6030/6050: 4.1.06

5.4 880mm paper support for 6030 and 6050

If 880mm paper is loaded and configured on the 6030/6050 it will be recognized by the FreeFlow

Accxes controller. The 880mm media will be displayed and used for printing and copying.

Page 10

Other manuals for 850DP - Phaser Color Solid Ink Printer

This manual suits for next models

Table of contents

Other Xerox Software manuals

Xerox

Xerox 850DP - Phaser Color Solid Ink Printer User manual

Xerox

Xerox DocuColor 45054549 Installation and operating instructions

Xerox

Xerox FREEFLOW 701P47393 User manual

Xerox

Xerox Phaser 340 Installer User manual

Xerox

Xerox 2121L - FaxCentre B/W Laser User manual

Xerox

Xerox DocuColor 242 User manual

Xerox

Xerox DocuColor 252 User manual

Xerox

Xerox FreeFlow Service manual

Xerox

Xerox 6100BD - Phaser Color Laser Printer User manual

Xerox

Xerox WORKCENTRE C2424 User manual

Xerox

Xerox 5 User manual

Xerox

Xerox DocuColor 6060 User manual

Xerox

Xerox DocuColor 2045 Programming manual

Xerox

Xerox DocuPrint 100MX User manual

Xerox

Xerox 850DP - Phaser Color Solid Ink Printer Service manual

Xerox

Xerox 850DP - Phaser Color Solid Ink Printer Instruction Manual

Xerox

Xerox 850DP - Phaser Color Solid Ink Printer User manual

Xerox

Xerox SMARTsend 3.0 User manual

Xerox

Xerox Scan to PC Desktop Professional User manual

Xerox

Xerox 7700 User manual

Xerox

Xerox 3812 User manual

Xerox

Xerox 850DP - Phaser Color Solid Ink Printer Instruction Manual

Xerox

Xerox PAGIS PRO 2.0 User manual

Xerox

Xerox Document Services Platform Series User manual

Popular Software manuals by other brands

COMPRO

COMPRO COMPROFM manual

Muratec

Muratec OFFICEBRIDGE ONLINE user guide

Oracle

Oracle Contact Center Anywhere 8.1 installation guide

Adobe

Adobe 65007312 - Photoshop Lightroom Programmer's guide

Avaya

Avaya NULL One-X for RIM Blackberry user guide

HP ProLiant BL420c user guide

PS Audio

PS Audio PowerPlay Programming manual

Brady

Brady LOCKOUT PRO 3.0 Administrator's guide

Avaya

Avaya Interaction Center user guide

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Guide book

Novell

Novell GROUPWISE 8 - INTERNET AGENT manual

Oracle

Oracle Application 9i Configuration guide

Acer

Acer RDM user guide

Canon

Canon Vixia HF21 instruction manual

Canon

Canon ZR950 instruction manual

Samsung

Samsung Auto Backup user manual

Polycom

Polycom Vortex EF2201 Application note

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c user manual