Wilson Electronics WEBOOST DRIVE X OTR User manual

Cellular Booster For Trucks

DRIVE X OTR

A WILSON ELECTRONICS BRAND

NEED HELP? support.weboost.com

Use our weBoost App to guide you through the installation.

See inside page for more details.

1-866-294-1660

Installation Guide

Download the weBoost App

Use our app to guide you through setting up a weBoost cell phone

signal booster in your home, business, or vehicle. Boost every

network, including 5G, right away.

Download the weBoost App

Videos to guide you

through installation

Antenna positioning guide

for optimal performance

Before and after cell

signal readings

______

Index

Package Contents 1

STEP 1: Select Mounting Location & Assemble the Antenna 2

STEP 2: Mount Outside Antenna 5

STEP 3: Mount Inside Antenna 6

STEP 4: Connect Coax Cables To Booster 7

STEP 5: Connect Power Supply To Booster 8

Light Patterns 10

Troubleshooting 11

Safety Guidelines 13

Speciﬁcations 14

Warranty 15

1VEHICLE SIGNAL BOOSTER DRIVE X OTR

________

Package

Contents

Booster

& Bracket

Outside

Antenna

(311229)

Inside

Antenna

(314401)

Power

Supply

(859913)

Mast Extensions

& Side Exit Adapter

(991113, 991129,

990061)

3- Way Antenna

Mount

(901104)

Antenna

Spring

(901206)

Thread Lock

Packets

Cable

Adapter

Typical Antenna

Mounting Points

DRIVE X OTR VEHICLE SIGNAL BOOSTER 2

______

Step 1: Select Mounting

Location & Assemble The

Antenna

Depending on the type of truck, there may be built-in antenna

mounting points. If the vehicle does not have built-in mounting

points, the antenna includes a 3-way mount that will work on

vehicles with mirror rails. The antenna will also work with third

party CB antenna mounts.

Select mounting location on vehicle. The antenna can be

mounted in any CB mount or antenna mounting point on the

vehicle. For best performance mount the antenna above the

metal cab (it does not need to be above cab wind deﬂector).

Typical Antenna

Mounting Points

NOTE: Mount at least 12 inches from any other antennas. Free of obstructions.

NOTE: If the vehicle is using two CB antennas co-phase wiring, removing one

antenna will cause reduced performance of the remaining CB antenna.

3VEHICLE SIGNAL BOOSTER DRIVE X OTR

Mast

Extension

Mast

Extension

Mast

Extension

Antenna

Side Exit

Adapter

cable

from antenna

OTR

Antenna

Thread Lock

Once you have determined the

best location for the antenna

and have determined if mast

extensions are needed, insert

cable through mast.

If using mast extension(s) add

thread locker (packets provided)

to thread point(s). Screw into

place.

Add thread locker (packets

provided) to thread point and

screw on the side exit adapter.

NOTE: Mast Extensions may not be

needed depending on your mounting

point.

NOTE: Be sure the antenna is the correct

height before applying thread locker.

NOTE: When adding the side exit adapter

hold the antenna vertically and screw the

adapter from the bottom up. This reduces

cable twisting.

______

(STEP 1 cont.)

DRIVE X OTR VEHICLE SIGNAL BOOSTER 4

______

(STEP 1 cont.)

13 in.

Mast

13 in.

Mast

13 in.

Mast

18 in.

Mast

Side Exit

Adapter

Antenna Spring

(can be used

optionally)

DO NOT USE

Antenna Spring

with 2 Mast Extensions

5VEHICLE SIGNAL BOOSTER DRIVE X OTR

______

Step 2: Mount Outside

Antenna

3-Way

Antenna Mount

Mount disc washer

with lip in the

DOWN position

Fasten nut with lip

in the UP position

mirror rail

or bird perch mount

Side Exit

Adapter

Mast

The cable is strong enough

that it may be shut in most

vehicle doors without

damaging the cable.

These are some typical antenna mounting points. If the vehicle

does not have built-in mounting points, a 3-way mount is

included that will work on vehicles with mirror rails.

Top of Mirror Mirror ArmUpper Side

3-Way Mount

on bird perch

DRIVE X OTR VEHICLE SIGNAL BOOSTER 6

______

Step 3: Mount Inside Antenna

Identify a place to mount the in-vehicle antenna, either on the

side of the seat or on the dash and mount. The location should

be at least 18 inches but no more than 36 inches from where

the cellular device will be used. Use the Velcro® adhesive

strip/adhesive strip provided and attach to

desired location.

In-Vehicle

Antenna

In-Vehicle

Antenna

Velcro®

7VEHICLE SIGNAL BOOSTER DRIVE X OTR

______

Step 4: Connect Coax Cables

To Booster

Connect the cable from the outside antenna to the port labeled

“Outside Antenna” on the Drive X OTR booster.

Connect the cable from the in-vehicle antenna to the port

labeled “Inside Antenna” on the booster.

from Outside Antenna

from Inside Antenna

NOTE: Bracket can be used to fasten booster in a speciﬁc location if desired.

This manual suits for next models

Table of contents

Other Wilson Electronics Extender manuals

Wilson Electronics

Wilson Electronics weBoost DRIVE X 475021R User manual

Wilson Electronics

Wilson Electronics 4000R User manual

Wilson Electronics

Wilson Electronics 460006 User manual

Wilson Electronics

Wilson Electronics weboost Office 100 User manual

Wilson Electronics

Wilson Electronics weBoost DRIVE X User manual

Wilson Electronics

Wilson Electronics 801105 User manual

Wilson Electronics

Wilson Electronics weboost AH100-PRO User manual

Wilson Electronics

Wilson Electronics weboost DRIVE REACH OTR FLEET User manual

Wilson Electronics

Wilson Electronics Pro 70 Plus User manual

Wilson Electronics

Wilson Electronics weboost Office 100 User manual

Wilson Electronics

Wilson Electronics 460054 User manual

Wilson Electronics

Wilson Electronics signalboost dt 271265 User manual

Wilson Electronics

Wilson Electronics 277380 User manual

Wilson Electronics

Wilson Electronics 277280 User manual

Wilson Electronics

Wilson Electronics WILSON PRO 4000 User manual

Wilson Electronics

Wilson Electronics Signal 4G SmarTech III User manual

Wilson Electronics

Wilson Electronics Mobile 4G SmarTech III 460108 User manual

Wilson Electronics

Wilson Electronics WILSON PRO 4000R User manual

Wilson Electronics

Wilson Electronics AG Pro 75 User manual

Wilson Electronics

Wilson Electronics iDEN 800 MHz 274080 User manual

Wilson Electronics

Wilson Electronics Signal 3G User manual

Wilson Electronics

Wilson Electronics Sleek User manual

Wilson Electronics

Wilson Electronics weboost DRIVE REACH User manual

Wilson Electronics

Wilson Electronics Weboost AM100-PRO User manual

Popular Extender manuals by other brands

SY HDBT-60T installation guide

Appsys ProAudio

Appsys ProAudio ADX-16 user manual

Atlona

Atlona RS232 user manual

IDK

IDK OPF-TH1000-A user guide

Enable-IT

Enable-IT 824WP quick start guide

Worx

Worx Landroid RadioLink WA0864 Get started

TP-Link

TP-Link TL-WA730RE user guide

Camplex

Camplex CMX-HDMI-SFPL user manual

SC&T

SC&T HE03-4K user manual

Marmitek

Marmitek MegaView70 user manual

Samsung

Samsung SCS-26UC4 user guide

Foxun

Foxun SX-GES24 operating instructions

MuxLab

MuxLab 500771 Operation manual

foxunhd

foxunhd SX-AEX01 operating instructions

TERK Technologies

TERK Technologies LFIRX2 owner's manual

Devolo

Devolo Audio Extender supplementary guide

Edimax

Edimax EW-7438RPn V2 instructions

Shinybow USA

Shinybow USA SB-6335T5 instruction manual