Whirlpool WGD88HEA User manual

Gas Dryer

PRODUCT MODEL NUMBERS

W10573707B

10/2013

WGD70HEB, WGD71HEB, WGD80HEB, WGD86HEB,

WGD88HEA, WGD94HEA, WGD96HEA, WGD98HEB

27"

(686 mm)

383/4" Min.

(984 mm)

39" Max.

(990 mm)

Back view:

1/4

(159 mm)

297/8"*

(759 mm)

31/2"*

(89 mm)

53/4"*

(146 mm)

61/8"*

(156 mm)

143/8"

(365 mm)

253/4"

(654 mm)

3/4"*

(18 mm)

NOTE: Most installations require a minimum of 5" (127 mm)

clearance behind dryer for exhaust vent with elbow. See “Venting

Requirements.”

Side view:

Front view:

* Approx. measurement

DRYER DIMENSIONS

Gas

* Approx. measurement

Water inlet

(Steam Models Only)

Vent

18" min.

(457 mm)

(25 mm)

(127 mm)

24 in.2 min.

(155 cm2)

48 in.2 min.

(310 cm2)

(76 mm)

(25 mm)

Recommended installation clearances (dryer only):

* 0" (0 mm) spacing is allowed.

Installation spacing for recessed area

or closet installation

All dimensions show recommended and minimum spacing allowed.

■Additional spacing should be considered for ease of

installation and servicing.

■Additional clearances might be required for wall, door, oor moldings, dryer venting, and gas line.

■Additional spacing should be considered on all sides

of the dryer to reduce noise transfer.

■For closet installation, with a door, minimum ventilation openings in the top and bottom of the door

are required. Louvered doors with equivalent ventilation openings are acceptable.

■Companion appliance spacing should also be considered.

Because Whirlpool Corporation policy includes a continuous commitment to improve Dimensions are for planning purposes only. For complete details, see Installation

our products, we reserve the right to change materials and specications without notice. Instructions packed with product. Specications subject to change without notice.

ELECTRICAL REQUIREMENTS

VENTING REQUIREMENTS

Exhaust venting: Exhaust your dryer to the outside. 4" (102 mm)

diameter vent is required. Rigid or exible metal exhaust vent

must be used. Do not use plastic or metal foil vet. Exhaust hood

must be at least 12" (305 mm) from the ground or any object that

may be in the path of the exhaust.

Louvered Hood

Angled Hood

Box Hood

Exhaust hoods:

Recommended Styles:

Acceptable Style:

The dryer must be connected to the cold water faucet using new inlet hoses. Do not use old hoses. Do not overtighten.

Damage to the coupling can result.

A 120-volt, 60 Hz, AC-only, 15 or 20 amp fused electrical supply is required. A time-delay fuse or circuit breaker and a separate circuit

are recommended.

GAS SUPPLY REQUIREMENTS

Gas supply: This dryer is equipped for use with Natural gas. Dryer can be converted to L.P. gas. When rigid pipe is used it should be 1/2" IPS. When

acceptable to the gas supplier and local codes, 3/8" approved tubing may be used for lengths under 20 ft (6.1 m). For lengths over 20 ft (6.1 m), larger

tubing should be used. Pipe-joint compounds resistant to the action of L.P. gas must be used. An individual manual shutoff valve must be installed

within 6 ft (1.8 m) of the dryer in accordance with the National Fuel Gas Code ANSI Z223.1.

WATER (STEAM MODELS ONLY) REQUIREMENTS

Determine vent path:

■Select route that will provide straightest and most direct

path outdoors.

■Plan installation to use fewest number of elbows and

turns.

■When using elbows or making turns, allow as much

room

as possible.

■Bend vent gradually to avoid kinking.

■Use as few 90° turns as possible.

INSTALLATION REQUIREMENTS

Standard Vent System Chart

Number of

90° elbows

Type

of vent

Angled

hoods

0Rigid metal

Rigid metal

64 ft. (20 m)

54 ft. (16.5 m)

44 ft. (13.4 m)

35 ft. (10.7 m)

27 ft. (8.2 m)

Determine vent length and elbows needed for best

drying performance:

■Use the “Vent System Charts” on the next page to determine

type of vent material and hood combinations acceptable to

use.

NOTE: Do not use vent runs longer than those specied

in “Vent System Charts.”

Exhaust systems longer than those specied will:

■Shorten life of dryer.

■Reduce performance, resulting in longer drying times

and increased energy usage.

Long Vent System Chart*

Number of

90° elbows

Type

of vent

Angled

hoods

0Rigid metal

Rigid metal

160 ft. (48.8 m)

150 ft. (45.7 m)

140 ft. (42.7 m)

130 ft. (39.6 m)

120 ft. (36.6 m)

*For Model WGD71HEW only; for all other models, refer to the

Standard Vent System Chart above. To nd your model number,

refer to the model and serial number plate in the inner door well.

NOTE: For long vent systems, use of box/louvered hoods will

improve venting regardless of length.

This manual suits for next models

Table of contents

Other Whirlpool Dryer manuals

Whirlpool

Whirlpool LER5624BN0 User manual

Whirlpool

Whirlpool Cabrio W10164159B User manual

Whirlpool

Whirlpool LGV4634JQ0 User manual

Whirlpool

Whirlpool WGD5000VQ User manual

Whirlpool

Whirlpool SEDS800MQ0 User manual

Whirlpool

Whirlpool HYBRIDCARE YWHD560CHW0 User manual

Whirlpool

Whirlpool LE7680XP User manual

Whirlpool

Whirlpool LER3624BW3 User manual

Whirlpool

Whirlpool duet GEW9200LQ0 User manual

Whirlpool

Whirlpool 8578198 User manual

Whirlpool

Whirlpool 8578230 User manual

Whirlpool

Whirlpool LE7005XP User manual

Whirlpool

Whirlpool WED5300ST User manual

Whirlpool

Whirlpool Duet Sport YWED8300SB2 User manual

Whirlpool

Whirlpool LEW0050PQ - Electric Dryer User manual

Whirlpool

Whirlpool WED4616FW User manual

Whirlpool

Whirlpool WED9050X Parts list manual

Whirlpool

Whirlpool WGD8300SB2 User manual

Whirlpool

Whirlpool WED5500BW User manual

Whirlpool

Whirlpool AWZ 3520 WP User manual

Whirlpool

Whirlpool CGM2751TQ - COMM GAS DRYR 3CYC 3TEMP 3LITE User manual

Whirlpool

Whirlpool W10301450A-SP User manual

Whirlpool

Whirlpool 96273100 User manual

Whirlpool

Whirlpool Gold GEQ8831LL0 User manual

Popular Dryer manuals by other brands

Bosch

Bosch WTA79200GB Installation and operating instructions

Amana

Amana W10233410A Use and care guide

Miele

Miele TWH 780 WP operating instructions

Asko

Asko T760 user guide

Alliance Laundry Systems

Alliance Laundry Systems 25 Series Original instructions

Bosch

Bosch Logixx 10 WTB76556GB Instruction manual and installation instructions

STIEBEL ELTRON

STIEBEL ELTRON Ultronic S Operation and installation

Electrolux

Electrolux EW2H328R2 user manual

Beko

Beko DS8433RX1M user manual

Dawlance

Dawlance Spinner DS 6000 C owner's manual

Electrolux

Electrolux TP5080TW user manual

AEG

AEG TR838P4OB user manual

Indesit

Indesit IDV 75 instruction manual

Infiniton

Infiniton SD-DG85C manual

BOMANN

BOMANN WT 5019 instruction manual

Alliance Laundry Systems

Alliance Laundry Systems TMB795C Installation

Asko

Asko T793C operating instructions

Kenmore

Kenmore 8041 - 5.8 cu. Ft. Capacity Electric Dryer installation instructions