Whirlpool WFC7500VW User manual

120-VOLT ELECTRIC

COMPACT DRYER

Use & Care Guide

8578198C

TABLE OF CONTENTS

DRYER SAFETY..............................................................................2

INSTALLATION INSTRUCTIONS ..................................................4

Tools and Parts ............................................................................4

Location Requirements................................................................4

Electrical Requirements ...............................................................5

Venting Requirements..................................................................6

Plan Vent System.........................................................................6

Install Vent System.......................................................................7

Install Cord Bracket and Casters.................................................8

Connect Vent................................................................................8

Complete Installation ...................................................................8

DRYER USE ....................................................................................9

Starting Your Dryer.......................................................................9

Stopping and Restarting..............................................................9

Loading.......................................................................................10

Drying, Cycle, and Temperature Tips ........................................10

Cycles.........................................................................................10

DRYER CARE ...............................................................................11

Cleaning the Dryer Location ......................................................11

Cleaning the Lint Screen............................................................11

Cleaning the Dryer Interior .........................................................11

Removing Accumulated Lint......................................................12

Vacation and Moving Care.........................................................12

TROUBLESHOOTING ..................................................................12

ASSISTANCE OR SERVICE.........................................................13

WARRANTY ..................................................................................14

DRYER SAFETY

You can be killed or seriously injured if you don't immediately

You can be killed or seriously injured if you don't follow

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of fire, electric shock, or injury to persons when using the dryer, follow basic precautions,

including the following:

WARNING:

Read all instructions before using the dryer.

Do not place items exposed to cooking oils in your dryer.

Items contaminated with cookin g oils may contribute to

a chemical reaction that could cause a load to catch fire.

Do not dry articles that have been previously cleaned in,

was hed in, soaked in, or spotted with gasoline, dry-

cleaning solvents, other flammable, or explosive

substances as they give off vapors that could ignite or

explode.

Do not allow children to play on or in the dryer. Close

supervision of children is necessary when the dryer is

used near children.

Befor e the dryer is removed from service or discarded,

remove the door to the drying compartment.

Do not reach into the dryer if the drum is moving.

Do not repair or replace any part of the dryer or attempt

any servicing unless specifically recommended in this

Use and Care Guide or in published user-repair

instructions that you understand and have the skills to

carry out.

Do not use fabric softeners or products to eliminate static

unless recommended by the manufacturer of the fabric

softener or product.

Do not use heat to dry articles containing foam rubber or

similarly textured rubber-like materials.

Clean lint screen before or after each load.

Keep area around the exhaust opening and adjacent

surrounding areas free from the accumulation of lint, dust,

and dirt.

SAVE THESE INSTRUCTIONS

The interior of the dryer and exhaust vent should be

cleaned periodically by qualified service personnel.

Do not install or store the dryer where it will be exposed

to the weather.

Do not tamper with controls.

See installation instructions for grounding requirements.

INSTALLATION INSTRUCTIONS

Tools and Parts

Tools needed

Gather the required tools and parts before starting installation.

Read and follow the safety instructions provided with any tools

listed here.

Parts supplied

Remove parts package from the dryer drum. Check that all parts

listed are included.

Parts needed

Check local codes, existing electrical supply and venting, and

see “Venting Requirements” and “Electrical Requirements”

before purchasing parts.

Mobile home installations require metal exhaust system

hardware

Permanent installations require 4 dryer feet

For ordering information, please reference the “Assistance or

Service” section of this manual. You can also contact the dealer

from whom you purchased your dryer.

Location Requirements

You will need

A location that allows for proper exhaust installation. See

“Venting Requirements.”

A 120-volt, 60-hz., AC-only, 15- or 20-amp circuit.

A grounded electrical outlet located within 2 ft (610 mm)

of either side of the dryer. See “Electrical Requirements.”

A sturdy floor to support the dryer weight (dryer and load)

of 115 lbs (52 kg). The combined weight of a companion

appliance should also be considered.

A level floor with a maximum slope of 1" (25 mm) under entire

dryer.

Do not operate your dryer at temperatures below 45ºF (7ºC). At

lower temperatures, the dryer might not shut off at the end of an

automatic cycle. Drying times can be extended.

The dryer must not be installed or stored in an area where it will

be exposed to water and/or weather.

Check code requirements. Some codes limit, or do not permit,

installation of the dryer in garages, closets, mobile homes, or

sleeping quarters. Contact your local building inspector.

Installation Clearances

The location must be large enough to allow the dryer door to

open fully.

Dryer Dimensions

†Height with caster is 32½" (826 mm)

*Most installations require a minimum 5½" (140 mm) clearance

behind the dryer for the exhaust vent with elbows. See “Venting

Requirements.”

Minimum installation spacing for recessed area and closet

installation

The following dimensions shown are for the minimum spacing

allowed when the unit is to be operated with, or without, the

Stack Stand Kit. To purchase a Stack Stand Kit, see “Assistance

or Service.”

Additional spacing should be considered for ease of

installation and servicing.

Additional clearances might be required for wall, door, and

floor moldings.

Additional spacing of 1" (25 mm) on all sides of the dryer

is recommended to reduce noise transfer.

For closet installation with a door, minimum ventilation

openings in the top and bottom of the door are required.

Louvered doors with equivalent ventilation openings are

acceptable.

Companion appliance spacing should also be considered.

Flat-blade screwdriver

Level

Adjustable wrench

Vent clamps

Caulking gun and

compound (for installing

new exhaust vent)

Tin snips (new vent

installations)

1 - Cycle Control (timer)

knob

1 - Push to Start button

4 - casters

2 - cord brackets

2-screws

23 78

(606 mm)

20 34

(527 mm)

31"†

(787 mm)

Recessed or closet installation - Dryer only

Recessed or closet installation - Stacked

Mobile Home - Additional Location Requirements

This dryer is suitable for mobile home installations. The

installation must conform to the Manufactured Home

Construction and Safety Standard, Title 24 CFR, Part 3280

(formerly the Federal Standard for Mobile Home Construction

and Safety, Title 245, HUD Part 280) or Standard CAN/CSA-Z240

MH.

Mobile home installations require:

Metal exhaust system hardware which is available for

purchase from your dealer.

Special provisions must be made in mobile homes to

introduce outside air into the dryer. The opening (such as a

nearby window) should be at least twice as large as the dryer

exhaust opening.

Electrical Requirements

A 120-volt, 60-Hz., AC-only, 15- or 20-amp fused electrical

supply is required.

A time-delay fuse or circuit breaker is recommended. Be sure

fuse or circuit breaker matches the rating of your line.

Use a separate circuit serving only your dryer.

Do not use an extension cord.

A. Side view - closet or conned area

B. Recessed area

A. Recessed area

B. Side view - closet or conned area

C. Closet door with vents

(76 mm)

14"

(356 mm)

18"(457 mm)

(0 mm)

DRYER

WASHER

(76 mm)

(305 mm)

12"

(305 mm)

12"

(0 mm) 0"

(0 mm)

BA C

(25 mm)

(76 mm)

48 in.2

(309.7 cm )

24 in.

(154.8 cm )

(76 mm)

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

re, or electrical shock.

WARNING

GROUNDING INSTRUCTIONS

SAVE THESE INSTRUCTIONS

For a grounded, cord-connected dryer:

This dryer must be grounded. In the event of malfunction or

breakdown, grounding will reduce the risk of electric shock

by providing a path of least resistance for electric current.

This dryer is equipped with a cord having an equipment-

grounding conductor and a grounding plug. The plug must

be plugged into an appropriate outlet that is properly

installed and grounded in accordance with all local codes

and ordinances.

WARNING: Improper connection of the equipment-

grounding conductor can result in a risk of electric shock.

Check with a qualied electrician or service representative

or personnel if you are in doubt as to whether the dryer is

properly grounded. Do not modify the plug provided with the

dryer: if it will not t the outlet, have a proper outlet installed

by a qualied electrician.

Closet installation with WFC7500VW - Stacked

A. Recessed area

B. Side view - closet or conned area

C. Closet door with vents

DRYER

WASHER

(51 mm)

(25 mm)

(0 mm)

(0 mm) 0"

(0 mm)

BA C

(25 mm)

(76 mm)

48 in.2

(309.7 cm )

24 in.

(154.8 cm )

(76 mm)

SHELF

Venting Requirements

WARNING: To reduce the risk of fire, this dryer MUST BE

EXHAUSTED OUTDOORS.

4" (102 mm) heavy metal exhaust vent and clamps must be used.

DURASAFE™ vent products are recommended.

DURASAFE™ vent products can be purchased from your dealer

or by calling Whirlpool Parts and Accessories. For more

information, see the “Assistance or Service” section of this

manual.

The dryer exhaust must not be connected into any gas vent,

chimney, wall, ceiling, attic, crawlspace, or a concealed space

of a building.

Do not use an exhaust hood with a magnetic latch.

Do not install flexible metal vent in enclosed walls, ceilings,

or floors.

Use clamps to seal all joints. Exhaust vent must not be

connected or secured with screws or other fastening devices

which extend into the interior of the duct and catch lint.

Do not use duct tape.

IMPORTANT: Observe all governing codes and ordinances.

Use a heavy metal vent. Do not use plastic or metal foil vent.

Rigid metal vent is recommended to prevent crushing and kinking.

Flexible metal vent must be fully extended and supported when

the dryer is in its final position. Remove excess flexible metal vent

to avoid sagging and kinking that may result in reduced airflow.

An exhaust hood should cap the vent to prevent rodents and

insects from entering the home.

Exhaust hood must be at least 12" (305 mm) from the ground

or any object that may be in the path of the exhaust (such as

flowers, rocks or bushes, etc.).

If using an existing vent system, clean lint from the entire length

of the system and make sure exhaust hood is not plugged with

lint. Replace any plastic or metal foil vent with rigid metal or

flexible metal vent.

Plan Vent System

Typical installations vent the dryer from the rear of the dryer.

Alternate installations for close clearances

Venting systems come in many varieties. Select the type best

for your installation. Two close-clearance installations are shown.

Refer to the manufacturer’s instructions provided with the vent

system.

NOTE: The following kits for close clearance alternate

installations are available for purchase. For ordering information

see “Assistance or Service.”

Over-The-Top Installation:

Part Number 4396028

Periscope Installation (for use with dryer vent to wall vent

mismatch):

Part Number 4396037 - for mismatch of 0" (0 mm)

to 18" (457 mm)

Part Number 4396011 - for mismatch of 18" (457 mm)

to 29" (737 mm)

Part Number 4396014 - for mismatch of 29" (737 mm)

to 50" (1.27 m)

WARNING

Fire Hazard

Use a heavy metal vent.

Do not use a plastic vent.

Do not use a metal foil vent.

Failure to follow these instructions can result in death

or fire.

Improper venting can cause moisture and lint to collect

indoors, which may result in:

Moisture damage to woodwork, furniture, paint,

Housecleaning problems and health problems.

wallpaper, carpets, etc.

A. Exhaust hood

B. Flexible metal vent or rigid metal vent

C. Elbow

A. Over-The-Top installation (also available with

one offset elbow)

B. Periscope installation

Only rigid or flexible metal duct shall be used for exhausting.

The total length of flexible metal vent should not exceed

73⁄4ft (2.4 m).

Special provisions for mobile home installations

The exhaust vent must be securely fastened to a noncombustible

portion of the mobile home structure and must not terminate

beneath the mobile home. Terminate the exhaust vent outside.

Determine vent length

1. Select the route that will provide the straightest and most

direct path outdoors. Plan the installation to use the fewest

number of elbows and turns. When using elbows or making

turns, allow as much room as possible. Bend ventgradually

to avoid kinking. Avoid 90° turns when possible.

2. Determine vent length.

The maximum length of the exhaust system depends upon:

The type of vent (rigid metal or exible metal).

The number of elbows used.

Type of hood.

Recommended hood styles are shown here.

The angled hood style (shown following) is acceptable.

See the exhaust vent length chart that matches your hood type

for the maximum vent lengths you can use.

Exhaust systems longer than specied will:

Shorten the life of the dryer.

Reduce performance, resulting in longer drying times and

increased energy usage.

3. Determine the number of elbows you will need.

IMPORTANT: Do not use vent runs longer than specied in the

Vent Length Chart.

Find the maximum length of metal vent on the same line as the

number of elbows.

Vent Length Chart

Install Vent System

1. Before installing the vent system, be sure to remove the wire

exhaust guard that is located at the exhaust outlet.

2. Install exhaust hood. Use caulking compound to seal exterior

wall opening around exhaust hood.

3. Connect vent to exhaust hood. Vent must t inside exhaust

hood. Secure vent to exhaust hood with 4" (102 mm) clamp.

4. Run vent to dryer location. Use the straightest path possible.

See “Determine vent length.” Avoid 90º turns. Use clamps to

seal all joints. Do not use duct tape, screws, or other fastening

devices that extend into the interior of the vent to secure

the vent, because they can catch lint.

A. Louvered style

B. Box hood style

better good

(102 mm)

Number of

90º turns

or elbows

Type of

vent Box or

louvered

hoods

Angled

hoods

0 Rigid metal 36 ft (11 m) 26 ft (7.9 m)

1 Rigid metal 26 ft (7.9 m) 16 ft (4.9 m)

2 Rigid metal 16 ft (4.9 m) 6 ft (1.8 m)

(102 mm)

2½"

(64 mm)

Install Cord Bracket and Casters

Do not move dryer into its final position until the following steps

have been performed.

Install cord bracket

1. Remove tape from the power cord and the rear panel.

2. Insert cord brackets into slotted holes in rear panel and

secure with screws provided.

NOTE: Power supply cord may be wrapped around the bracket s

for storage convenience when dryer is not in use.

Install casters

1. Lay the dryer on its side.

2. Use the carton to prevent damage to the dryer.

3. Screwcas ters into dryer base at four corners and tighten

securely.

4. Set the dryer upright. In doing so, be careful that the dryer

does not roll away from you.

NOTE: Permanent installations require 4 dryer feet. See

“Assistance or Service” section for ordering information.

Connect Vent

1. Using a 4" (102 mm) clamp, connect vent to exhaust outlet

in dryer. If connecting to existing vent, make sure the vent is

clean. The dryer vent must fit over the dryer exhaust outlet

and inside the exhaust hood. Make sure the vent is secured

to exhaust hood with a 4" (102 mm) clamp.

2. Move dryer into final position. Do not crush or kin k vent.

Make sure dryer is level.

3. (On gas models) Checkt o be sure there are no kinksin

the

flexible gas line.

Complete Installation

1. Check to be sure all parts are now installed. If there is an

extra part, go back through the steps to see wh ich step was

skipped.

2. Check to be sure you have all of your tools.

3. Dispose of/r ecycle all packaging materials.

4. Check the dryer’s final location. Be sure the vent is not

crushed or kinked.

5. Check to be sure the dryer is on a level surface.

6. Plug into a grounded 3 prong outlet. Turn power on.

7. Remove the blue protective film on the console and any tape

remaining on the dryer. Remove tape from the lint screen

(located on inside backwa ll of dryer).

8. Read “Dryer Use.”

9. Wipe the dryer drum interior thoroughly wi th a damp cloth to

remove any dust.

10. To test the dryer, set the dryer on a full heat cycle (not an air

cycle) for 20 minutes and start the dryer.

If the dryer will not start, check the following:

Controls are set in a running or “On” position.

Start button has been firmly pushed.

Dryer is plugged into a grounded 3 prong outlet.

Electrical supply is connected.

House fuse is intact and tight, or circuit breaker has not

tripped.

Dryer door is closed.

11. When the dryer has been running for 5 minutes, open the

dryer door and feel for heat.

If you do not feel heat, check the following:

Controls are set on a heated cycle, not an air cycle.

NOTE: You may notice an odor when dryer is first heated.

This odor is common when the heating element is first used.

The odor willgoaway.

A. Cord bracket

B. Slotted hole

C. Screw

WARNING

Excessive Weight Hazard

Use two or more people to move and install dryer.

Failure to do so can result in back or other injury.

DRYER USE

Starting Your Dryer

WARNING: To reduce the risk of fire, electric shock, or injury to

persons, read the IMPORTANT SAFETY INSTRUCTIONS before

operating this appliance.

Before using your dryer, wipe the dryer drum with a damp cloth to

remove dust from storing and shipping.

1. Clean the lint screen before or after each cycle. See

“Cleaning the Lint Screen.”

2. Load clothes loosely into the dryer and close the door. Do not

pack the dryer. Allow space for clothes to tumble freely.

3. Turn the Cycle Control knob to the recommended cycle for

the type of load being dried. Use the Energy Preferred

Automatic Setting (*) to dry most heavyweight and medium

weight loads. See “Drying, Cycle, and Temperature Tips.”

4. Press the PUSH TO START button.

Stopping and Restarting

You can stop your dryer any time during a cycle.

To stop your dryer

Open the dryer door or turn the Cycle Control knob to OFF.

NOTE: The Cycle Control knob should point to an Off area when

the dryer is not in use.

To restart your dryer

1. Close the door.

2. Select a new cycle and temperature (if desired).

3. Press the PUSH TO START button.

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from dryer.

Do not dry anything that has ever had anything

flammable on it (even after washing).

Failure to follow these instructions can result in death,

explosion, or fire.

WARNING

Fire Hazard

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on

it (including cooking oils).

Items containing foam, rubber, or plastic must be dried

on a clothesline or by using an Air Cycle.

Failure to follow these instructions can result in death

or fire.

Load clothes loosely into the dryer. Do not overload the dryer.

Allow space for clothes to tumble freely. The following chart

shows the maximum load you can place in your compact dryer.

Expect longer drying times.

Drying, Cycle, and Temperature Tips

Select the correct cycle and temperature for your load.

Your dryer tumbles the load without heat during the last few

minutes of all cycles to make the load easier to handle.

Drying tips

Follow care label directions when they are available.

If desired, add a fabric softener sheet. Follow package

instructions.

Remove the load from the dryer as soon as tumbling stops to

reduce wrinkling. This is especially important for permanent

press, knits, and synthetic fabrics.

Cycle and temperature tips

Dry most loads using the Energy Preferred Automatic

Setting (*).

Use a no heat (air) setting for rubber, plastic, or heat-sensitive

fabrics.

Line dry bonded or laminated fabrics.

NOTE: If you have questions about drying temperatures for

various loads, refer to the care label directions.

Cycles

Cycle Control knob

Perm Press

This automatic cycle shuts off the dryer when the selected

dryness is reached. The Cycle Control knob does not move

until the load is almost dry. After the cool down, the knob

automatically turns to an Off area and tumbling stops.

Dry most loads using the Energy Preferred Automatic Setting (*).

If the load is drier than you like, select a setting closer to

Less the next time you dry a similar load.

If the load is not as dry as you like, complete drying using the

Timed Drying cycle. The next time you dry a similar load,

select a setting closer to Very Dry.

NOTE: Drying time with an automatic cycle varies according to

the type of fabric and size of load.

Air Cycle

Use this cycle for items that require drying without heat, such

as rubber, plastic, and heat-sensitive fabrics. See the chart for

examples of items that can be dried using an air cycle.

*(Minutes). Reset cycle to complete drying, if needed.

When using an air cycle

Check to see that coverings are securely stitched.

Shake and uff pillows by hand periodically during cycle.

Dry item completely. Foam rubber pillows are slow to dry.

Timed Drying Cycle

Use this cycle to complete drying if items are still damp after the

automatic cycle.

Timed Drying is also useful for:

Heavyweight items and work clothes that require a long

drying time.

Lightweight items, such as lingerie, blouses, and knits that

require a short drying time.

For damp dry, turn the Cycle Control knob to 30 minutes or less.

End of Cycle Signal

The dryer sounds a signal to let you know when the cycle is

nished. The signal is not adjustable and cannot be turned off.

The signal is helpful when you are drying permanent press,

synthetics, and other items that should be taken out as soon

as the dryer stops.

Heavy work

clothes 2 pair of pants, 3 work shirts

Delicates 1 camisole, 2 slips, 4 undergarments,

1 set of sleepwear, 1 half slip

Towels 9 bath towels; or 6 bath towels, 3 hand

towels, 6 washcloths

Mixed Load 2 pillowcases, 1 T-shirt, 2 shirts, 1 pair

slacks

Knits 2 slacks, 2 shirts; or 3 dresses

Perm Press 6 shirts; or 2 double sheets & 2 pillowcases;

or 2 singles sheets & 2 pillowcases

*emiTdaoLfoepyT

Foam rubber—pillows, padded bras,

stuffed toys

Plastic—shower curtains, tablecloths

Rubber-backed rugs

Olen, polypropylene, sheer nylon

20 - 30

40 - 50

10 - 20

Other manuals for WFC7500VW

Table of contents

Other Whirlpool Dryer manuals

Whirlpool

Whirlpool Cabrio WGD6600VU0 User manual

Whirlpool

Whirlpool AWZ8CDS/PRO Installation guide

Whirlpool

Whirlpool Gas dryer User manual

Whirlpool

Whirlpool DUET SPORT W10260035A User manual

Whirlpool

Whirlpool 3XWED5705SW0 User manual

Whirlpool

Whirlpool WEL98HEBU User manual

Whirlpool

Whirlpool BYCCD3421W0 User manual

Whirlpool

Whirlpool Duet Steam User manual

Whirlpool

Whirlpool W10150630A User manual

Whirlpool

Whirlpool W10184516C User manual

Whirlpool

Whirlpool 4LEC7646EN0 User manual

Whirlpool

Whirlpool Duet WGD9470W Parts list manual

Whirlpool

Whirlpool Gold GEQ8831LL0 User manual

Whirlpool

Whirlpool WED9600TA - 27" Electric Steam Dryer User manual

Whirlpool

Whirlpool 3LWED5500 User manual

Whirlpool

Whirlpool W10259188B - SP User manual

Whirlpool

Whirlpool LE7680XP User manual

Whirlpool

Whirlpool LE5530XP User manual

Whirlpool

Whirlpool LGR7620LQ0 User manual

Whirlpool

Whirlpool WED94HEAC0 User manual

Whirlpool

Whirlpool LE5600XP User manual

Whirlpool

Whirlpool CEM2750TQ - COMMCL E DRYR 3CYC 3TMP WHIRLP User manual

Whirlpool

Whirlpool Duet GGW9200LW0 User manual

Whirlpool

Whirlpool YLER5636PQ1 User manual

Popular Dryer manuals by other brands

Bosch

Bosch WTA79200GB Installation and operating instructions

Amana

Amana W10233410A Use and care guide

Miele

Miele TWH 780 WP operating instructions

Asko

Asko T760 user guide

Alliance Laundry Systems

Alliance Laundry Systems 25 Series Original instructions

Bosch

Bosch Logixx 10 WTB76556GB Instruction manual and installation instructions

STIEBEL ELTRON

STIEBEL ELTRON Ultronic S Operation and installation

Electrolux

Electrolux EW2H328R2 user manual

Beko

Beko DS8433RX1M user manual

Dawlance

Dawlance Spinner DS 6000 C owner's manual

Electrolux

Electrolux TP5080TW user manual

AEG

AEG TR838P4OB user manual

Indesit

Indesit IDV 75 instruction manual

Infiniton

Infiniton SD-DG85C manual

BOMANN

BOMANN WT 5019 instruction manual

Alliance Laundry Systems

Alliance Laundry Systems TMB795C Installation

Asko

Asko T793C operating instructions

Kenmore

Kenmore 8041 - 5.8 cu. Ft. Capacity Electric Dryer installation instructions