Western Digital 2U24 User manual
EcoDesign
Disclosures
2U24 Flash Storage Platform
Regulatory Model: G224-J-12
1ET2163
Version 1.0
February 2020
EcoDesign Disclosures Table of Contents
Table of Contents
Notices........................................................................................................................................................................................ ii
Chapter 1. EU EcoDesign Disclosures............................................................................................................................................ 1
EcoDesign Overview................................................................................................................................................................. 2
2U24 Flash Storage Platform EcoDesign Specifications.........................................................................................................2
Instant Secure Erase / Secure Erase........................................................................................................................................3
2U24 Flash Storage Platform Disassembly...............................................................................................................................5
i
EcoDesign Disclosures Notices
Notices
Western Digital Technologies, Inc. or its affiliates' (collectively “Western Digital”) general policy does not
recommend the use of its products in life support applications wherein a failure or malfunction of the product
may directly threaten life or injury. Per Western Digital Terms and Conditions of Sale, the user of Western
Digital products in life support applications assumes all risk of such use and indemnifies Western Digital
against all damages.
This document is for information use only and is subject to change without prior notice. Western Digital
assumes no responsibility for any errors that may appear in this document, nor for incidental or consequential
damages resulting from the furnishing, performance or use of this material.
Absent a written agreement signed by Western Digital or its authorized representative to the contrary,
Western Digital explicitly disclaims any express and implied warranties and indemnities of any kind that may,
or could, be associated with this document and related material, and any user of this document or related
material agrees to such disclaimer as a precondition to receipt and usage hereof.
Each user of this document or any product referred to herein expressly waives all guaranties and warranties
of any kind associated with this document any related materials or such product, whether expressed or
implied, including without limitation, any implied warranty of merchantability or fitness for a particular
purpose or non-infringement. Each user of this document or any product referred to herein also expressly
agrees Western Digital shall not be liable for any incidental, punitive, indirect, special, or consequential
damages, including without limitation physical injury or death, property damage, lost data, loss of profits or
costs of procurement of substitute goods, technology, or services, arising out of or related to this document,
any related materials or any product referred to herein, regardless of whether such damages are based on
tort, warranty, contract, or any other legal theory, even if advised of the possibility of such damages.
This document and its contents, including diagrams, schematics, methodology, work product, and
intellectual property rights described in, associated with, or implied by this document, are the sole and
exclusive property of Western Digital. No intellectual property license, express or implied, is granted by
Western Digital associated with the document recipient's receipt, access and/or use of this document or the
products referred to herein; Western Digital retains all rights hereto.
Western Digital, the Western Digital logo, and Ultrastar are registered trademarks or trademarks of Western
Digital Corporation or its affiliates in the US and/or other countries. Linux® is the registered trademark of
Linus Torvalds in the U.S. and other countries. All other marks are the property of their respective owners.
Product specifications subject to change without notice. Pictures shown may vary from actual products. Not
all products are available in all regions of the world.
Western Digital
5601 Great Oaks Parkway
San Jose, CA 95119
© 2020 Western Digital Corporation or its affiliates. All Rights Reserved.
ii
Western Digital
EU EcoDesign
Disclosures
This document provides information and instructions related
to the 2U24 Flash Storage Platform's disclosures for the EU's
ecodesign requirements.
In This Chapter:
- EcoDesign Overview......................................2
- 2U24 Flash Storage Platform EcoDesign
Specifications...................................................2
- Instant Secure Erase / Secure Erase............ 3
- 2U24 Flash Storage Platform
Disassembly......................................................5
1
EcoDesign Disclosures 1. EU EcoDesign Disclosures
1.1 EcoDesign Overview
1.1 EcoDesign Overview
This document provides information about the 2U24 Flash Storage Platform related to its manufacturing and
operation, and instructions for secure data deletion and disassembly.
1.2 2U24 Flash Storage Platform EcoDesign Specifications
Product Type Data Storage
Manufacturer's Name Western Digital
Manufacturer's Registered Trade Name Western Digital®
Manufacturer's Registered Trade Address 5601 Great Oaks Parkway
San Jose, CA 95119
USA
Product Model Number G224-J-12
Starting Year of Manufacture 2016
PSU efficiency at 20%, 50%, 100%
of rated output power
20% load = 88%
50% load = 92%
100% load = 88%
Power Factor at 50% Rated Load Level Minimum Power Factor = 0.95
Declared Operating Condition Class A2
Neodymium Content in HDDs N/A (no HDDs)
Cobalt Content in Batteries N/A (no batteries)
2
EcoDesign Disclosures 1. EU EcoDesign Disclosures
1.3 Instant Secure Erase / Secure Erase
1.3 Instant Secure Erase / Secure Erase
This section provides conceptual information and instructions for using the Instant Secure Erase (ISE) or
Secure Erase (SE) features included with Western Digital drives.
Data Erasure Options
Western Digital provides several options for securely erasing data from its drives. The appropriate method
depends upon many factors, including the following:
•Erase Configuration (ISE or SE)
•Drive Type (HDD or SSD)
•Interface Type (SAS, SATA)
•Encryption (none, TCG, or FIPS)
For more information on the sanitize command for specific drive models, please see the drive model's
specification, contact Western Digital technical support, or download the following whitepaper for details:
https://documents.westerndigital.com/content/dam/doc-library/en_us/assets/public/western-digital/
collateral/tech-brief/tech-brief-instant-secure-erase....
ISE / SE Overview
Instant Secure Erase (ISE) is Western Digital’s implementation of the industry standard T10 (SAS)/T13 (SATA)
sanitize command, allowing users to instantly erase both user-accesible data and hidden user data from
Western Digital drives.
The sanitize command supports three options:
1. Crypto Scramble (SATA) / Crypto Erase (SAS): deletes the encryption key of a self-encrypting drive.
2. Overwrite (HDDs): overwrites the data on the drive with a supplied value.
3. Block Erase (SSDs): electrically erases each storage element by modifying their voltage levels.
Secure Erase (SE) is a subset of ISE, where the Crypto Scramble / Erase option has been disabled, allowing
only the Overwrite or Block Erase options.
Requirements
To perform secure deletion, the following versions are the minimal recommended/supported utilities for
each drive interface required on the host. For other versions, please verify the arguments/parameters in the
appropriate man pages.
•SAS: sg_sanitize version 1.00 20151219 (included in sg3_utils 1.42 *)
•SATA: hdparm version 9.58
Erase Methods
The following methods cover all erasure options and storage technologies for Western Digital drives.
For more information on the sanitize command for specific drive models, please see the drive model's
specification.
Note: If a RAID adapter or software is in use, remove the drives from a RAID set before erasure.
* For details on how to use the sg3_utils v1.42 utility, visit http://sg.danny.cz/
3
EcoDesign Disclosures 1. EU EcoDesign Disclosures
1.3 Instant Secure Erase / Secure Erase
Note: If a drive is encrypted (TCG or FIPS), unlock the drive before executing any sanitize
commands.
Note: In the following commands, replace the generic reference of <dev> with the specific
device reference appropriate for your operating system (i.e. sgX for Linux, SCSIX:X,X,X for
Windows).
SAS
Note: In the following sg_sanitize commands, the --quick option starts the deletion
immediately. If the --quick option is not specified, the drive's inquiry response strings are
printed in case the wrong device has been specified, and the user is given 15 seconds to
reconsider whether they wish to erase all the data on the drive.
•ISE - Crypto Erase - HDD/SSD:
# sg_sanitize --crypto --quick <dev>
•SE - Overwrite - HDD:
# sg_sanitize --overwrite --quick --zero <dev>
•Block Erase - SSD:
# sg_sanitize --block --quick <dev>
SATA
•ISE - Crypto Erase - HDD/SSD:
# hdparm --yes-i-know-what-i-am-doing --sanitize-crypto-scramble <dev>
•SE - Overwrite - HDD:
# hdparm --yes-i-know-what-i-am-doing --sanitize-overwrite hex:11111111 <dev>
•Block Erase SSD:
# hdparm --yes-i-know-what-i-am-doing --sanitize-block-erase <dev>
4
EcoDesign Disclosures 1. EU EcoDesign Disclosures
1.4 2U24 Flash Storage Platform Disassembly
1.4 2U24 Flash Storage Platform Disassembly
This task provides instructions for disassembling a 2U24 Flash Storage Platform to meet the EU's ecodesign
requirements.
Table 1: Procedure Info
Required Tools # of People Required Time
Required
Replacement
Window
#2 Phillips-Head Screwdriver 2 * 1 hours N/A
Powering Down the Enclosure
Step 1 : At the rear of the enclosure, locate the power cable connected to each PSU:
Step 2 : Detach the cable retention clip from the power cable:
Step 3 : Remove the power cable by pulling its plug away from the receptacle on the PSU.
Caution: To reduce the potential for damaging equipment, do not jerk the cable
out of the PSU.
Step 4 : Repeat these steps to remove the remaining power cable.
Removing the SAS Cables
Step 5 : At the rear of the enclosure, locate the three (3) HD Mini-SAS cables attached to each ESM:
* 2 people required for lifting enclosure; only 1 required for disassembly
5
EcoDesign Disclosures 1. EU EcoDesign Disclosures
1.4 2U24 Flash Storage Platform Disassembly
Step 6 : If the HD Mini-SAS cables will be reinstalled at a later time, ensure each is labeled or removed in
an organized manner such that it can be returned to the same port from which it was removed.
Step 7 : To remove an HD Mini-SAS cable, pull on the blue tab extending from beneath the connector.
This will free the cable from the port.
Caution: To reduce the potential for damaging equipment, do not jerk the cable
out of the ESM.
Step 8 : Repeat these steps to remove the remaining HD Mini-SAS cables.
Removing the Drives
Step 9 : At the front of the enclosure, locate the twenty-four (24) drives.
Step 10 : If the drives will be reinstalled at a later time, ensure each is labeled or removed in an organized
manner such that it can be returned to the same bay from which it was removed.
Step 11 : To remove a drive assembly, press the release button to unlatch the drive carrier from the
enclosure.
The carrier's handle should extend out of the enclosure:
Step 12 : Grasp the handle and pull the drive carrier out of the enclosure with even pressure:
6
EcoDesign Disclosures 1. EU EcoDesign Disclosures
1.4 2U24 Flash Storage Platform Disassembly
Step 13 : Repeat these steps to remove the remaining drives from the enclosure. Store each drive
assembly in an ESD-safe environment. Do not stack them on top of one another.
Disassembling Drive Assemblies
Step 14 : Lay a drive assembly (drive & carrier) on its side.
Step 15 : Using a #2 Phillips screwdriver, remove the four (4) M3 6mm screws from the edges of the drive
carrier:
Step 16 : Pull the drive upward to remove it from the carrier:
7
Other manuals for 2U24
2
This manual suits for next models
1
Table of contents
Other Western Digital Storage manuals
Western Digital
Western Digital WDBAAJ0010HSL - My Book Studio User manual
Western Digital
Western Digital WD Elements WDBAAU0025HBK User manual
Western Digital
Western Digital WDXB3200JB User manual
Western Digital
Western Digital BLACK 2 User manual
Western Digital
Western Digital My Book World Edition WDH1NC10000 User manual
Western Digital
Western Digital WD60000H2NC User manual
Western Digital
Western Digital Power-saving Hard Drives WD RE4-GP User manual
Western Digital
Western Digital WDG1T2500N - My Book Pro Edition 250 GB External Hard... Installation instructions
Western Digital
Western Digital WDBVHT0040JCH User manual
Western Digital
Western Digital WD1200JB - Caviar 120 GB Hard Drive User manual
Western Digital
Western Digital My Passport Essential SE WDBACY5000A Series Assembly Instructions
Western Digital
Western Digital My Passport WDME1600 User manual
Western Digital
Western Digital SanDisk SecureAccess IXPAND 3.0 32GO User manual
Western Digital
Western Digital Caviar WD7500AAKS Manual
Western Digital
Western Digital My Passport Ultra User manual
Western Digital
Western Digital WDXUB3200JB - Dual-Option USB User manual
Western Digital
Western Digital WD5000AZRX User manual
Western Digital
Western Digital MY PASSPORT AIR User manual
Western Digital
Western Digital Computer Hard Drive User manual
Western Digital
Western Digital WD Caviar User manual
Western Digital
Western Digital WD SATA Hard Drives User manual
Western Digital
Western Digital Scorpio Blue WD1200BEVE User manual
Western Digital
Western Digital WDBAAR2500ABK - Elements Portable 250 GB External Hard... User manual
Western Digital
Western Digital WDBAAG0010HCH - My Book For Mac User manual
