Wellis Eclipse-Hemlock User manual

T AINS ALL TION GUIDE

INFRARED SAUNA

WS00156

Eclipse-Hemlock infrared sauna

INSTALLATION GUIDE 2

Eclipse-Hemlock infrarot sauna

AUFBAUANLEITUNG 17

Sauna infrarouge Eclipse-Hemlock

GUIDE D’INSTALLATION 33

Eclipse-Hemlock infravörös szauna

TELEPÍTÉSI ÚTMUTATÓ 49

HU WS00156

EclipsE-HEmlock

2/16

PREFACE

Thank you very much for purchasing our product.

Please read this manual carefully before assembling and save it afterwards. Please write down the control

box serial number of the cabin as this number will be required in case of repair or order of spare parts.

ATTENTION

Installation and repair should only be done by a qualified electrician!

Check power supply rating and make sure the grounded outlet is correctly connected before installation.

Use original parts only. Do not share the outlet with any other appliances.

When not in use, turn off the cabin's power unit.

Locate your cabin indoors and on a flat, level and dry surface.

DANGER

Heaters shall not be subjected to water spray; shower heads shall not be installed within the infrared cabin.

Covering the radiator causes a fire hazard due to overheating. Do not cover the heaters !

Keep flammable or easily combustible materials/objects (eg.towels) away from the radiator at all times.

Do not touch the radiator during and shortly after use as a burning hazard exists due to hot parts.

The light bulb heats in use. If the bulb needs to be changed, unplug the cabin and let the bulb cool down

before changing it.

Should the electrical connection get damaged, it must be replaced-either by the manufacturer or by a

licensed electrician!

WARNING

If you suffer from illness or other health-related problems, especially heart conditions or circulatory

disturbances or if you take medication, you should consult a doctor before using the infrared cabin.

Children and frail persons should never be in the cabin without supervision.

If you feel uncomfortable while using the infrared cabin, stop immediately and consult with your doctor.

Never go to a hot infrared cabin if you have taken alcohol, strong medicines or narcotics.

Technical data

Model

Cabin material

Length

Width(depth)

Height

Voltage

Radiators Type

Total output

Back panel

Side panel

Calves

Eclipse-A17

Regular hemlock

2043 mm

2008mm

2055 mm

230volt 50Hz

Ruby halogen tube radiator

2800W 12.2 A

350W x 3

350W x 2

3/16

Cabin Individual parts (variations possible)

NO NAME Q'TY

11 1

Box No

2 1 2

5 1 3

912

712

Back panel 1(1988*1190*43.5mm)

Back panel 2(1988*890*43.5mm)

connecting bar 1 (1908*90*20mm)

Side panel 2 (1995.5*890*48mm)

Side panel 1 (1995.5*1190*48mm)

connecting bar 2 (1270*90*20mm)

Upright column 2 (2050*90*40mm)

Upright column 1 (2050*90*40mm)

PARTS LIST

13 11

3334

Door cross beam(lower,1863*60*40mm)

Side cross beam(lower,1820*60*40mm)

Front upright column (2050*90*40mm)

Front (*651*6mm) glass 1920

Front (with hole, *651*6mm) glass 1920

Side glass 1920(*883*6)

2 3

NO NAME Q'TY

Box No

4/16

Door cross beam(upper,1863*105*40mm)

Side cross beam (upper,1941*90*40mm)

Top decorative bar 1 (1959*30*30mm)

Top decorative bar 2 (1856*30*30mm)

Top panel 1 (1958*967*40.5mm)

Top panel 2 (1958*967*40.5mm)

Bench support panel 1(1000*925*48mm)

Bench support panel 2(925*600*48mm)

Calves guardrail (670*250*43mm)

Bench support panel 3(1910*90*40mm) with hole,

Bench support panel 4(1273*90*40mm) with hole,

Bench support panel 5(1910*90*40mm)

Bench surface panel 1(1910*600*33mm)

Bench surface panel 2(1910*400*33mm)

Bench surface panel 3(1267*600*33mm)

Side guardrail (1861*643*54mm)

Back guardrail (1958*643*54mm)

Floor panel (966*890*33mm)

Door handle (300*40*45mm)

Glass door (1888*572*6mm)

MDF cover (1958*967*3mm,1958*947*3mm)

Side upright column 1900*90*40 ( mm)

5/16

ASSEMBLE INSTRUCTIONS

Assemble tips

Tools

Spiral drill (kit)

Screwdriver (kit)

Allen Wrench (kit)

Spirit level

Tape measure Electric drill

Cutter

Pencil

Hammer

Stepladder

Hardware parts (variations possible)

Please remove transport packaging and inspect that your infrared cabin has been delivered complete and

intact before beginning assemble.

A least 2 persons are required for assemble of the cabin

Please check the countersink and hole diameter of the drill holes to avoid damaging the wood..

The minimum room height required for installation is 2175mm

28x 70x

Φ4*50

Φ4*40

Φ6*60

22x

Φ4*60

Rubber

22m

Strip Glass clip

1x 12x

Mixed Screw

4 5

6/16

ASSEMBLE INSTRUCTIONS

Assemble steps

(3)(4)

4-Φ4*40

10-Φ4*50

4-Φ4*40

(1) (2)

8-Φ4*50

7/16

ASSEMBLE INSTRUCTIONS

Assemble steps

18-Φ4*60

16 17

14 X2

(7)(8)

(5) (6)

X1 X5

6 7

8/16

ASSEMBLE INSTRUCTIONS

Assemble steps

16-Φ4*40

4-Φ4*40

Note: connecting bar(No.13 & No.14)

should be 40mm lower than the

top of four walls.

40mm

19 18X2

(9)

(10)

9/16

ASSEMBLE INSTRUCTIONS

Assemble steps

14-Φ4*50 Make sure the temperature sensor should be out about

2cm from the silicon

pipe

（pipe/3cm+sensor/2cm=5cm away from ceiling）.

(11)

(12)

2-Φ4*60

8 9

10/16

ASSEMBLE INSTRUCTIONS

Assemble steps

8-Φ4*50

6-Φ4*50

8-Φ4*50

(15)(16)

(13) (14)

30 28

X2X2

11/16

ASSEMBLE INSTRUCTIONS

Assemble steps

8-Φ4*50

Note: back guardrail distance away

from bench surface panel about 20mm.

Note: side guardrail distance away

from bench surface panel about 20mm.

(17)

(18)

10 11

12/16

ASSEMBLE INSTRUCTIONS

Assemble steps

2-Φ6*60

Wood cover

Glass clip

Rubber

Strip

Note: connect all cables on the roof of the cabin

(19)

Hinge surface

Rubber fitting

Glass door

Hinge bottom

Rubber fitting

Hex screw

13/16

To Heater

AC230V/15A

MAX:10A/1PCS

Power box

Temperature

Sensor

Antenna Speaker

4Ω/3W

OUTPUT DC12V/3A

INPUT AC230V

Color light

DC12V/8W

105°C

Temperature Control

FKF-603

Input Voltage

Power Rating

Current Rating

Safety Grade

Model

12.2A

2800W

AC230V/50HZ

CIRCUIT DIAGRAM

AC230V/350W

USB

FM/MP3/BLUETOOTH PLAYER

MP3

12 13

SERVICE

Use instructions

Drink plenty of liquids before and after use of the infrared cabin.

Dry yourself off completely.

The optimal cabin temperature for a pleasant session lies between 35 and 60℃.

After a heating period of an hour at the latest, the cabin should be switched off and a heating brake of

at least 30 minutes should be taken.

Maintenance instructions

Clean the cabin with a damp cotton towel, dry with a clean dry towel.

Clean the glass with a window/glass cleaner and a soft cloth.

Do not pour water in the control panel or clean it with wet cloth. For cleaning purposes, use a cleaning

cloth that has been only slightly moistened with a mild soapy solvent (dish detergent).

Do not use chemical detergents to clean the cabin.

Please fasten the screws of the bench once every three months, avoid the loose or drop off.

15/16

It is recommended to take a warm shower and relax after use.

Notes:

14 15

Other Wellis Plumbing Product manuals

Popular Plumbing Product manuals by other brands

Weka

Weka 506.2020.00E ASSEMBLY, USER AND MAINTENANCE INSTRUCTIONS

Kohler

Kohler K-6228 Installation and care guide

UBERHAUS DESIGN

UBERHAUS DESIGN 75175017 Operator's manual

American Standard

American Standard DetectLink 6072121 manual

Uponor

Uponor Contec TS Mounting instructions

Pfister

Pfister Selia 49-SL Quick installation guide

Fortis

Fortis VITRINA 6068700 quick start guide

Fortis

Fortis MILANO 78211JS installation instructions

Kohler

Kohler K-12183 Homeowner's guide

Maxxus

Maxxus MX-M206-01 instruction manual

Moen

Moen 5922 Series installation instructions

Viega

Viega Prevista Pure 8512 Instructions for use

Kohler

Kohler Centerset K-15240 Homeowner's guide

Viega

Viega Prevista Dry 8522.33 Instructions for use

Sanela

Sanela Lema SLP 59RB Instructions for use

Elkay

Elkay EDF15AC Installation, care & use manual

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Instructions for use/assembly instructions

baliv

baliv WT-140 manual