Volt VPL-1043-4-BBZ User manual

VOLT®Low Voltage Landscape Lighting

VOLT® Wider Modernelle

VPL-1043-4-BBZ

INSTALLATION INSTRUCTIONS

- 1 -

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

Specications and product details subject to change without notice.

[email protected] • 813.978.3700

VOLT®Wider Modernelle

VPL-1043-4-BBZ

Important: Please Read Before Installation

Important Safety Instructions

INSTALLATION INSTRUCTIONS

www.voltlighting.com

- 2 -

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure that the power is turned OFF before installing or servicing

this luminaire.

2. Warning: risk of electrical shock. Install all luminaires 10 feet (3.05M)

or more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with UL listed wire connectors that

are suitable for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or

tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before reducing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may

damage lamp.

6. Do not operate the xture with a damaged or missing lens or shield.

Package Contents

Parts Required (sold separately)

Product Dimensions

[email protected] • 813.978.3700

- 3 -

A. (1) Fixture Body

A. (1) G4 Bi-Pin

B. (1) Stake

22”

6”2”

1”

INSTALLATION INSTRUCTIONS

www.voltlighting.com

- 4 -

Remove Lens

Install G4 Bulb

VOLT® Wider Modernelle

VPL-1043-4-BBZ

Remove the lens from the xture

by loosening the screws.

Fixture

Screw

Lens

Insert the Bi-Pin with correct

wattage and type marked on

xture label and push into

place.

CAUTION: Do not exceed

maximum wattage marked on

luminaire label.

NOTE: DO NOT touch bulb with

bare hands. Use soft cloth to

handle bulb.

Socket

Bi- Pin

[email protected] • 813.978.3700

- 5 -

Install Lens

Place the lens back onto the

xture and secure with the

previously removed screws.

Tighten until snug.

Fixture

Screw

Lens

Install Stake

Determine the desired location

for mounting the stake mount.

Hammer the stake into the

ground until ange of stake

is ush to grade. To avoid

damage to the stake, place a

board on top of the stake while

hammering.

Note: If the ground is hard and

the stake is difcult to install,

make a crosscut in the ground

using a at shovel.

Board

Ground

Soil

Stake

INSTALLATION INSTRUCTIONS

www.voltlighting.com

- 6 -

VOLT® Wider Modernelle

VPL-1043-4-BBZ

Install Fixture to Stake

Wire Connections

Pass the xture wire through

the center hole of the stake.

Thread the xture on to the

stake and hand tighten until

snug.

Fixture

Fixture Wire

Strip both leads from xture body. Using two wire connectors (sold

separately), connect the leads from the xture body to main supply

cable leads.

Pigtail

Main Supply Cable

Supply Wire from

Fixture Body

Wire Connectors

[email protected] • 813.978.3700

- 7 -

Install/Replace G4 Bulb

Please reverse Step 2 - Step 3 to expose the bi-pin and replace it with the

correct wattage and type marked on the xture label. And then reinstall

the lens.

IMPORTANT: Bi-Pin must be protected from moisture and dust at all times.

Always reinstall the lens when removed.

IS-VPL-1043-4-BBZ-ver1.pdf

Specications and product details subject to change without notice.

[email protected] • 813.978.3700

www.voltlighting.com

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

- 8 -

Table of contents

Other Volt Landscape Lighting manuals

Popular Landscape Lighting manuals by other brands

Intex

Intex SL1006 owner's manual

LED Group

LED Group ROBUS R2IN13W quick start guide

Patriot Lighting

Patriot Lighting 343-1484 installation manual

Hess

Hess SERA G: SERA S Installation and operating instructions

LIGMAN

LIGMAN JET 44 installation manual

LIGMAN

LIGMAN MALTA 1 installation manual

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Specification sheet

Cooper Lighting

Cooper Lighting Invue 42 - 175W Specification sheet

Saxby Lighting

Saxby Lighting Islay 68784 Instruction leaflet

LIGMAN

LIGMAN EU-10016-3 installation manual

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza specification

LIGMAN

LIGMAN KI-60475 installation manual

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Specification sheet

Malibu Boats

Malibu Boats CL905K instructions

LIGMAN

LIGMAN NYB-30161 installation manual

LIGMAN

LIGMAN SI-80021 installation manual

Malibu Boats

Malibu Boats CM110P instructions

U.S.T.E.

U.S.T.E. VISTA 8202 installation instructions