Vivo MOUNT-V001G User manual

Table of contents

Popular TV Mount manuals by other brands

Ergotron

Ergotron Neo Flex Cantilever UHD user guide

StarTech.com

StarTech.com FPCEILBTB user manual

VonHaus

VonHaus 05/038 instruction manual

Techlink

Techlink ECHO TV manual

Sandstrom

Sandstrom SSTVMC12X instruction manual

Sony

Sony SU-WL700 Additional information for Using

ICW

ICW SCACC18 installation instructions

LG

LG WM-L640V owner's manual

Gembird

Gembird WM-65ST-01 user manual

ERARD

ERARD FiTUP XXL 035320 quick start guide

PEERLESS

PEERLESS PLCK-1 Installation and assembly

Kanto

Kanto RCF180 user manual

GEM

GEM GEM GP001 instructions

Gladiator Joe

Gladiator Joe GJ0A0053 quick start guide

Vivotek

Vivotek AM-105 installation guide

AmazonBasics

AmazonBasics B07QG3LMG4 manual

Secura

Secura QLF210 instruction manual

Marquant

Marquant 929-083 Operating instructions in original

1

Single Monitor Wall Mount

Instruction Manual

Email: help@vivo-us.com

Live chat: www.vivo-us.com

Call: 1-800-371- 6 4

-Model: MOUNT V001G

Scan the QR code with your mobile device or follow the link

to helpful videos and specifications related to this product.

Tools Required:

phillips screwdriver

Package Contents

- W A x2) - W B x2) - W C x2)

-M A x4)

M4x12

-M B x4)

M5x12

- M C x4)

D5

A x1) C x1)

5mm

B x2)

2

Assembly Steps

Step 1

For concrete or brick wall installation, use a pencil to mark drilling

locations and drill 2/4” deep holes using a 3/8” bit. Mount arm (A) to

wall using screws (W-A) , anchors (W-B), washers (W-C).

Option B: Concrete/Brick Wall Installation

Use a pencil to mark drilling location for wood beam and drill 2.2”

deep holes using 3/16”bit. Use of a stud finder is recommended.

Mount arm (A) to wall using screws (W-A) and washers (W-C). Do

NOT use anchors (W-B) for wood beam installation.

Option A: Wood Wall Installation

Press covers into screw holes.

Step 2

3

Install screws (M-A) or (M-B) with washers (M-C) in top two holes of

the monitor, leaving 3mm of space between the screw heads and

the monitor.

Hang monitor over top two slots of VESA plate, install two bottom

screws, and then tighten top screws,

Step 3 Continued) Step 4

Tighten the socket screw if the joints are making a popping sound.

Adjust arm tension by turning screw with Allen wrench (C). Turn

clockwise to reduce tension and turn counterclockwise to increase

tension. The tension should be just enough to hold your monitor In

place without lifting itself up. If needed, adjust bolts on the sides of

the hinge behind the VESA plate to tighten or loosen the tilt angle.

Step 5

Remove cable cover by

removing the screw

underneath each one.

If you do not understand these directions, or if you have any

doubts about the safety of the installation, please call a

qualified technician. Check carefully to make sure there are no

missing or defective parts. Improper installation may cause

damage or serious injury. Do not use this product for any

purpose that is not explicitly specified in this manual. We

cannot be liable for damage or injury caused by improper

mounting, incorrect assembly, or inappropriate use.

Email: help@vivo-us.com

Live chat: www.vivo-us.com

Call: 1-800-371- 6 4

For more VIVO products, check out our

website at

www.vivo-us.com.

If any parts are received damaged or defective, please contact

us. We are happy to replace parts to ensure you have a fully

functioning product.

Safety Warning

Contact us at:

Last updated: /1/2018 4

Step 6

Adjust as Desired

Insert cables and replace covers while making sure the cables have

enough slack to allow enough free movement of the arm.