Vivo STAND-V003E User manual

Triple Monitor Desk Stand

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/stand-v003e

SKU: STAND-V003E

[email protected]om www.vivo-us.com 309-278-5303

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualified technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

A (x3)

VESA Plate

C(x1)

Arm

D(x1)

Base

M-A (x12)

M4x12

M-D (x12)

M5x16

K (x3)

Screw

M-F (x12)

Spacer

M-E (x12)

D5 Washer

E(x1)

Pole

F(x1)

Pole

G (x1)

Pole

Connector

H(x2)

Cable Clip

I (x2)

Height

Adjustment Knob

J (x2)

Bolt

M-C (x12)

M5x12

M-B (x12)

M4x16

M (x1)

3mm Allen

Wrench

N (x1)

4mm Allen

Wrench

O (x1)

6mm Allen

Wrench

B(x1)

Bracket

L (x1)

Thumbscrew

TIPOVER WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• TO PREVENT TIPPING, PLEASE BE CAREFUL NOT TO EXTEND THE ARMS TOO FAR FORWARD

OR BACKWARD.

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR

STAND.

• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

ASSEMBLY STEPS

STEP 1

TOOLS NEEDED

Phillips

Screwdriver

STEP 2

Slide one pole clip (H) on the pole (E). Add

one dual arm (C). Choose desired height and

tighten with Allen wrench (O).

22 lbs

Per Arm

(10 kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

Attach pole (E) into the bottom of the base (D). Use

the Allen wrench (N) to tighten the screws (K).

STEP 3

Screw pole connector (G) to pole (E) and then add pole (F). Use Allen wrench (M) to tighten down the

grub screws on the pole connector.

STEP 4

Slide the single monitor bracket (B) onto the pole and secure at

desired height. Add another cable clip (H). Tighten with Allen

wrench (O).

STEP 5

Slide monitors onto all brackets.

STEP 6

OPTION A: Flat Back Monitor

For flat back monitor, install VESA plate (A) to monitor using bolts (M-A) or (M-C) and washers (M-E).

OPTION B: Curved Back Monitor

For curved back monitor, align spacers (M-F) with mounting holes in monitor and secure VESA plate

(A) to monitor using screws (M-B or M-D) and washers (M-E).

AM- A

M- C

M- E

AM- B

M- D

M- E

M- F

STEP 7

STEP 8

Route cables through cable management clips.

Add parts (J) and (I) to secure the monitors. Use the built-in adjustment screws on the brackets to align

your monitors. For the single bracket, add screw (L) to secure it.

STEP 9

Place Allen wrenches into slots on

clips for easy access.

STEP 10

Do not move monitors past center of gravity. This could result in tipping.

Adjust as Desired

+45 °

-45°

+45 °

-45°

+45 °

-45°

±180 °

LAST UPDATED: 10/28/2019

Open Monday-Friday from 7:00am-7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times.

If any parts are received damaged or defective, please contact us.

We are happy to replace parts to ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

[email protected]

www.vivo-us.com

309-278-5303

AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

AVG. RESOLUTION TIME (within oice hrs): < 15 M

Table of contents

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 