Vivo MOUNT-VW100F VW100F User manual

  

Instruction Manual

Email: [email protected]

Live chat: www.vivo-us.com

Call: 1-800-371- 6 4

-  

 

phillips screwdriver

 

1

Scan the QR code with your mobile device or follow the link

to helpful videos and specifications related to this product.

- - !!"" #$! !$ "%&

'

(x1)

(

(x1)



(x1)

- (

(x6)

- 

(x6)

- '

M5x1 (x)

- (

M6x1 (x)

- 

M6x3 (x)

- )

M8x3 (x)

- 

(x)

- *

(x)

- +

(x8)

- '

(x6)

- ,

M8x3 (x)

'$-. / 

/ 

Use mount (A) to mark mounting holes on wall where studs are

located. Using a ¼” bit, drill 3. ” into wall. Install mount using

bolts (W-A) and washers (W-C).

  '  

2

/  01

  ( !( 

Use mount (A) to mark mounting holes on wall. Using a ½” bit,

drill 3.7” into wall. Insert anchors (W-B) into holes and use bolts

(W-A) and washers (W-C) to install mount.

3

/ 2 01

If bolts are too long, spacers (M-H, M-G) may be required.

/ 2

Mount brackets (B) to back of television using bolts (M-A, M-B,

M-C) and metal spacer (M-F). Make sure straps are towards

bottom of TV.

If you do not understand these directions, or if you have any

doubts about the safety of the installation, please call a

qualified technician. Check carefully to make sure there are no

missing or defective parts. Improper installation may cause

damage or serious injury. Do not use this product for any

purpose that is not explicitly specified in this manual. We

cannot be liable for damage or injury caused by improper

mounting, incorrect assembly, or inappropriate use.

Email: help@vivo-us.com

Live chat: www.vivo-us.com

Call: 1-800-371- 6 4

For more VIVO products, check out our

website at

www.vivo-us.com.

If any parts are received damaged or defective, please contact

us. We are happy to replace parts to ensure you have a fully

functioning product.

/&. 

  

Last updated: 04.24.18

/ 3

Attach TV to mount (A) as shown in

diagram. Make sure bottom of

brackets (B) are attached securely.

NOTE: To remove, pull

both straps down and

lift television off of

mount (A).

4

Table of contents

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 