Vivo MOUNT-POLE05L User manual

Table of contents

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 

Pole Mount Pneumatic Arm Laptop Holder

Scan the QR code with your mobile device or follow the link

for helpful videos and specications related to this product.

Instruction Manual

https://vivo-us.com/products/mount-pole05l

SKU: MOUNT-POLE05L

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2

PACKAGE CONTENTS

A (x1)

Arm

B(x1)

Bracket

C (x1)

Laptop Tray

E(x2)

Clip

M-B (x4)

M5x12mm Screw

M-C (x4)

M5 Washer

D (x2)

Laptop Tray

Arm

S-A (x2)

M8x50mm Screws

S-B (x2)

M8x65mm Screw

9.9 lbs

(4.5 kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualied technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

T-A (x1)

4mm Allen Wrench

T-B (x1)

5mm Allen Wrench

S-C (x2)

M8 Nut

S-D (x4)

M4x8mm Screw

M-A (x4)

M4x12mm Screw

3

ASSEMBLY STEPS

STEP 1

While holding Arm (A) closed, cut the shipping tie and gently open Arm (A).

STEP 2 (Option A)

28-45mm Pole Diameter:

For poles with a diameter of 28-45mm, assemble Arm (A) to the pole using Bracket (B) and M8x50mm

Screws (S-A) with M8 Nuts (S-C). Tighten screws using 5mm Allen Wrench (T-B).

A

A

B

S-A

S-C

T-B

4

46-60mm Pole Diameter:

For poles with a diameter of 46-60mm, assemble Arm (A) to the pole using Bracket (B) and M8x65mm

Screws (S-B) with M8 Nuts (S-C). Tighten screws using 5mm Allen Wrench (T-B).

STEP 2 (Option B)

Install Laptop Tray Arms (D) to Laptop Tray (C) using Clips (E).

STEP 3

A

B

S-B

S-C

T-B

D

C

E

5

STEP 4

Insert M4x8mm Screws (S-D) into the top two holes of Laptop Tray (C) using the Phillips end of 4mm

Allen Wrench (T-A), leaving atleast 3mm of threads exposed. Slide installed M4x8mm Screws (S-D) into

the slots in the VESA plate on Arm (A). Install remaining M4x8mm Screws (S-D) into the lower holes of

Laptop Tray (C).

S-D

C

T-A

S-D

Slot

A

Lower Hole

S-D T-A

C

6

STEP 6

Flip the stoppers on Laptop Tray (C) to prevent the laptop from sliding down. Unlock the latches on the

underside of Laptop Tray Arms (D) to adjust the arms to t your laptop. Place the laptop on Laptop Tray

(C), and once adjusted, lock Laptop Tray Arms (D) to secure it in place.

Stopper

C

D

STEP 5

Adjust the tension in Arm (A) using 5mm Allen Wrench (T-B).

A

T-B

7

STEP 7

Remove the screws from the cable management covers on the underside of Arm (A) using the Phillips

end of 4mm Allen Wrench (T-A). Route cables and reassemble the cable managment covers.

STEP 8

Adjust the tilt of Arm (A) using 5mm Allen Wrench (T-B).

A

T-A

A

T-B

LAST UPDATED: 08/04/2022

REV1

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303