Vivo STAND-V004Y User manual
Quad Monitor Desk Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v004y
SKU: STAND-V004Y
2
PACKAGE CONTENTS
WARNING!
A (x1)
Pole
B(x1)
Pole
C(x1)
Arm
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
D(x2)
VESA Bracket
E (x1)
Grommet Base
F (x1)
Clamp
G (x1)
Support Plate
H (x1)
Pole Connector
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
M-A (x16)
M4x12
M-B (x16)
M5x12
I (x6)
Cable Clip
J(x2)
Cable Clip
M-C (x16)
D5 Washer
K(x1)
Pole Cover
L (x5)
Rubber Pad
M (x1)
3mm Allen Key
N (x1)
5mm Allen Key
O (x1)
6mm Allen Key
3
ASSEMBLY STEPS
STEP 1
OPTION A: Clamp Installation
Stick so pads (L) to bottom of clamp base (F). Slide cable management clip (J) and base cover (K) on
to bottom of pole (A). Thread pole (A) onto clamp (F). Tighten grub screws in bottom of clamp (F) using
3mm allen key (M). Secure clamp (F) to desktop as shown in diagram.
OPTION B: Grommet Base Installation
Remove screw from top of bolt in clamp (F). Stick so pads (L) to bottom of grommet base (E). Slide
cable management clip (J) and base cover (K) on to bottom pole (A). Thread bottom pole (A) onto
grommet base (E). Tighten grub screws in bottom of grommet base (E) using 3mm allen key (M). Slide
metal pad (G) over bolt and slide through grommet hole in bottom of desktop. Thread into bottom of
grommet base (E).
10-88mm
M
L
J
K
F
A
FE
L
10-80mm
M
J
K
G
A
TOOLS NEEDED
Phillips
Screwdriver
17.6lbs
(8 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
PER ARM
4
STEP 2
Slide arm (C) and bracket (D) over top of pole and tighten using 5mm allen key (N).
N
D
23mm
N
C
5
STEP 3
STEP 4
Slide cable management clip (J) over bottom of top pole (B). Use pole connector (H) to attach pole
(B) to pole (A) as shown in diagram
Slide second bracket (D) on to pole (B) and tighten using 5mm allen key (N).
J
H
B
M
N
D
6
STEP 5
Attach cable management clips (I) to arms (C) as shown in diagram.
STEP 6
Attach two bolts (M-A or M-B) and washers (M-C) to top mounting holes of monitor, making sure
to leave 3mm of threads exposed. Align bolts (M-A or M-B) in VESA plate. Secure using two more
bolts (M-A or M-B) and washers (M-C) in the bottom two holes. Tighten all four bolts using phillips
screwdriver.
I
M- A
M- B
M- C
12
3m m
3
M- A
M- B
M- C
7
STEP 7
Adjust tension in monitor bracket with 6mm allen key (O) as shown in diagram.
STEP 8
Store allen keys (M,N,O) in cables management clips (J) for future adjustments.
STEP 9
Adjust height of monitors using 5mm allen key (N) as shown in diagram.
+45 °
-45 °
O
N
O
M
360°
360°
N
LAST UPDATED: 10/28/2019
Open Monday-Friday from 7:00am-7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times.
If any parts are received damaged or defective, please contact us.
We are happy to replace parts to ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
www.vivo-us.com
309-278-5303
AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
AVG. RESOLUTION TIME (within oice hrs): < 15 M
Table of contents
Other Vivo Rack & Stand manuals
Vivo
Vivo MOUNT-VW01E User manual
Vivo
Vivo MOUNT-VP06W User manual
Vivo
Vivo STAND-V200B User manual
Vivo
Vivo STAND-TV00R User manual
Vivo
Vivo STAND V001S User manual
Vivo
Vivo MOUNT-KB05HD User manual
Vivo
Vivo MOUNT-PLAY1B-1 User manual
Vivo
Vivo STAND-V002D User manual
Vivo
Vivo STAND-V011/W User manual
Vivo
Vivo MOUNT-VW02 User manual
Vivo
Vivo MOUNT-DLMM1 User manual
Vivo
Vivo STAND-MIC01 User manual
Vivo
Vivo STAND-V001HG User manual
Vivo
Vivo STAND-LAP2 User manual
Vivo
Vivo DESK-V133E User manual
Vivo
Vivo STAND-V002LW User manual
Vivo
Vivo STAND-V104A User manual
Vivo
Vivo MOUNT-KAYAK2 User manual
Vivo
Vivo MOUNT-HP32Q User manual
Vivo
Vivo MOUNT-E-MM070 User manual
Popular Rack & Stand manuals by other brands
Salamander
Salamander Acadia AC/W/L400/WH Assembly instructions
Fohhn
Fohhn VAT-09 Mounting instruction
ricoo
ricoo FS0522 quick start guide
AMSOIL
AMSOIL BMK-22 Installation and service instructions
Kargo Master
Kargo Master 48220 installation guide
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 installation instructions
