Vivo STAND-TS38B-4 User manual

Telescoping Quad Monitor Desk Mount

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/stand-ts38b-4

SKU: STAND-TS38B-4

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

PACKAGE CONTENTS

TOOLS NEEDED

WARNING!

Phillips

Screwdriver

A (x1)

Bottom Pole

D (x1)

Base

E (x2)

Arm with Pole

Collar

If you do not understand these directions, or if you have any doubts about the safety of the installation,

please call a qualified technician. Check carefully to make sure there are no missing or defective parts.

Improper installation may cause damage or serious injury. Do not use this product for any purpose that is

not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or

injury caused by improper mounting, incorrect assembly or inappropriate use.

F (x2)

Arm

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

I (x4)

Arm Cable Clip

17.6 lbs

(8kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

TIPOVER WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• TO PREVENT TIPPING, PLEASE BE CAREFUL NOT TO EXTEND THE ARMS TOO FAR FORWARD OR

BACKWARD.

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.

• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

G (x4)

VESA Plate

PER SCREEN

H (x2)

Pole Cable Clip

S-A (x3)

M5x16mm Screw

S-C (x4)

M6 Cap Nut

M-A (x16)

M4x12mm Thumbscrew

M-B (x16)

M4x30mm Screw

M-C (x16)

M4 Spacer

S-B (x2)

M8x42mm Screw

T-A (x1)

3mm Allen Wrench

T-B (x1)

5mm Allen Wrench

T-C (x1)

6mm Allen Wrench

B (x1)

Middle Pole

C (x1)

Top Pole With Cap

ASSEMBLY STEPS

STEP 1

Install Bottom Pole (A) to Base (D) using M5x16 Screws (S-A). Tighten with the 3mm Allen wrench

(T-A).

STEP 2

Thread Middle Pole (B) onto Bottom Pole (A), and Top Pole With Cap (C) onto Middle Pole (B).

S-A

T-A

STEP 3

Slide Pole Cable Clips (H) and arm assemblies onto the pole assembly. Secure arm assemblies using

6mm Allen Wrench (T-C). Attach Arm Cable Clips (I) to arms.

STEP 4

Install Arms (F) to Arms with Pole Collar (E) using M8x42mm Screws (S-B) and the 5mm Allen Wrench

(T-B). Ensure the tilt joints are facing in the same direction during installation.

T-C

S-B

T-B

STEP 5

OPTION A: Flat Back Monitor

Attach the VESA Plates (G) to the monitor with Thumbscrews (M-A).

NOTE: Hand tighten screws to avoid over tightening.

OPTION B: Curved Back Monitor

Attach VESA Plate (G) to the monitor with M4x30mm Screws (M-B) and M4 Spacers (M-C).

NOTE: Gently tighten using a screwdriver

STEP 6

STEP 7

Adjust the length of arm assemblies using 3mm Allen Wrench (T-A).

Slide VESA Plates (G) onto the arm assemblies. The monitors can be leveled using 3mm Allen Wrench

(T-A). Secure using M6 Cap Nuts (S-C).

T-A

S-C

T-A

Adjust the tilt using 5mm Allen Wrench (T-B).

STEP 8

Manage cables using Arm Cable Clips (I) and Pole Cable Clips (H).

STEP 9

T-B

LAST UPDATED: 05/02/2023

REV1.1

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Table of contents

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 