Vivo MOUNT-E-FD70S User manual

Black Electric Flip Down / Swivel Ceiling TV Mount

Follow along step-by-step with our video walk through by scanning

the QR code with your mobile device or by following the product

link: vivo-us.com/products/mount-e-fd70s

Instruction Manual

SKU: MOUNT-E-FD70S

ASSEMBLY VIDEO AVAILABLE:

[email protected]om www.vivo-us.com

309-278-5303

PERSONABLE CUSTOMER SUPPORT

Our friendly product support team is here to help!

DO NOT RETURN ITEM

We’re Here for You!

Missing a Part?

Our customer-minded support team is here for YOU,

Monday-Friday 7am-7pm CST.

We oer immediate assistance with rapid response times

from customer service agents and product techncians to

help you every step of the way!

Monday-Friday

Chat Us:

www.vivo-us.com

Give us a Call:

309-278-5303

Email Us:

[email protected]om

If any parts are received damaged / defective OR you are

missing a part, please reach out to us within 30 days of

product delivery to have it replaced at no cost.

We are happy to replace parts to ensure you have a fully

functioning product

7AM - 7PM

If you do not understand these directions, or if you have any doubts about the

safety of the installation, please call a qualified technician. Check carefully to

make sure there are no missing or defective parts. Improper installation may

cause damage or serious injury. Do not use this product for any purpose that

is not explicitly specified in this manual. Do not exceed weight capacity. We

cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

PRE-ASSEMBLY | BEFORE YOU BEGIN

Product Warranty

Returns | Product Didn’t Work Out?

For the most up to date details on your product’s warranty, please visit

the product’s listing on our website or reach out to customer support.

vivo-us.com/products/mount-e-fd70s

We oer a hassle-free 30 day return on all products. Contact customer

support at 309-278-5303 or [email protected]om. Please note: For items

ordered in error or no longer needed, the return shipping charges will

be at the buyer’s expense.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS

REQUIRED.

WEIGHT CAPACITY

DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury.

77lbs

(35kg)

CAUTION!

DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE

WOOD STUDS TO MOUNT. We include mounting for brick and concrete walls. If

unsure, please contact us at vivo-us.com, email at [email protected]om,

or call us at 309-278-5303.

PITCH CEILING WARNING:

DO NOT attempt to install on a pitched ceiling. Mount will not operate as intended.

PACKAGE CONTENTS

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

M-F (x4)

Small Spacer

M-D (x4)

M8x35mm Screw

M-E (x4)

M8 Washer

M-A (x4)

M6x14mm Screw

M-B (x4)

M8x16mm Screw

M-C (x4)

M6x30mm Screw

Please consult the parts list below and ensure you have everything you need to assemble

your product. If parts are missing or damaged, please contact us.

Phillips Screwdriver

TOOLS NEEDED:

A (x1)

Mount

B(x1)

Center Plate

C(x1)

Ceiling Template

H(x1)

Remote

D (x2)

Mounting Bracket

E (x2)

VESA Bracket

F (x2)

Bracket Rail

G (x1)

AC Adapter

DIFFICULTY LEVEL

Drill Pencil

M-G (x4)

Large Spacer

W-A (x4)

ST6.3x55mm

Screw

W-B (x4)

Concrete Anchor

W-C (x2)

Washer

I(x4)

Cable Tie

J(x2)

Cable Clip

T-A (x1)

3mm Allen Wrench

S-A (x4)

M6x10mm

Set Screw

S-B (x4)

M6x25mm Screw

S-C (x4)

M6 Washer

S-D (x4)

M6 Nut

S-E (x4)

M4x8mm Screw

Wrench Stud Finder

S-F (x4)

M6x10mm Screw

T-B (x1)

4mm Allen Wrench

S-F (x4)

M6x10mm Screw

T-B (x1)

4mm Allen Wrench

ASSEMBLY STEPS

D (x2)

Mounting Bracket

A(x1)

Mount

S-F T-B

STEP 1: Installing the Mounting Brackets

For wooden joist mounting, determine what direction the joists run and the direction you want

the display mounted. Using the layout images, assemble Mounting Brackets (D) to Mount (A)

using M6x10mm Screws (S-F) and 4mm Allen Wrench (T-B). For concrete ceilings, Mounting

Brackets (D) can be assembled in either orientation.

Joists

TV Direction

Joists

NOTE: The remaining steps will

be using this mounting style

OPTION B: Concrete Ceiling

Using Ceiling Template (C), mark exact location of mounting holes. Drill pilot holes 2.4” (60mm) deep, using a

3/8” (10mm) drill bit. Insert Concrete Anchors (W-B) into drilled holes. Insert two ST6.3x55mm Screws (W-A)

inline with the keyhole slots on the mount, leaving a 5mm gap from ceiling. Hang Mounting Brackets (D)

so that the screws fit into the keyhole openings, then then slightly rotate the mount so the screw heads are

resting on the smaller hole. Tighten screws and secure using additional additional ST6.3x55mm Screws (W-A)

and Washers (W-C).

W-A (x4)

ST6.3x55mm Screw

W-C (x2)

Washer

C (x1)

Template

W-B (x4)

Concrete Anchor

W-AW-A

W-B

W-C

STEP 2: Mounting VESA Assembly

OPTION A: Wood Beam Ceiling

Using Ceiling Template (C), mark exact location of mounting holes. Drill pilot holes 2.2” (55mm) deep using

a 3/16” (4.5mm) drill bit. Insert two ST6.3x55mm Screws (W-A) inline with the keyhole slots on the mount,

leaving a 5mm gap from ceiling. Hang Mounting Brackets (D) so that the screws fit into the keyhole openings,

then then slightly rotate the mount so the screw heads are resting on the smaller hole. Tighten screws and

secure using additional additional ST6.3x55mm Screws (W-A) and Washers (W-C).

W-A

W-C

STEP 3: Assembling VESA Components

Assemble Bracket Rails (F) to Center Plate (B) using M6x25mm Screws (S-B), M6 Washers (S-C)

and M6 Nuts (S-D). While holding M6 Nuts (S-D) with a wrench, use a Phillips screwdriver to

tighten M6x25mm Screws (S-B). Slide VESA Brackets (E) onto Bracket Rails (F) and secure using

M4x8mm Screws (S-E) and 3mm Allen Wrench (T-A).

S-C (x4)

M6 Washer

F(x2)

Bracket Rail

B (x1)

Center Plate

E(x2)

VESA Bracket

S-B (x4)

M6x25mm Screw

STEP 4: Adjusting VESA Assembly

Adjust VESA Brackets (E) spacing to match TV mounting holes, and lock in place using M6x10mm

Set Screw (S-A) and 3mm Allen Wrench (T-A).

S-A (x4)

M6x10mm Set Screw

STEP 5: Removing VESA Screws

S-B

S-CS-D

S-E

T-A

S-D (x4)

M6 Nut

S-E (x4)

M4x8mm Screw

T-A (x1)

3mm Allen Wrench

Remove the four pre-installed screws from Center Plate (B) and loosen the center screw until 5mm

of thread is exposed.

S-A

T-A

STEP 6: Mounting VESA Assembly

STEP 7: Place TV on Mount

Attach VESA assembly to TV using appropriate mounting Screws (M-A through M-D), M8 Washers (M-E), and

Spacers (M-F, M-G).

Place the TV with VESA bracket assembly on Mount (A) by inserting the center screw on Center Plate (B) into

the keyhole on Mount (A) at the desired height. Secure using previously removed screws (STEP 5) and tighten

with a Phillips screwdriver. Clearance between the ceiling and top edge of TV should be no less than 15mm

when TV is in the fully lowered position.

M-G (x4)

Large Spacer

M-A (x4)

M6x14mm Screw

M-B (x4)

M8x16mm Screw

M-C (x4)

M6x30mm Screw

M-D (x4)

M8x35mm Screw

M-E (x4)

M8 Washer

M-F (x4)

Small Spacer

STEP 8: Manage Cables

STEP 9: Connect AC Adapter

Remove the adhesive backing from Cable Clips (J) and place them on the side of Mount (A).

Route Cables through Cable Clips (J) and use Cable Ties (I) to fasten cables to the side of the arm.

J (x2)

Cable Clip

I(x4)

Cable Tie

Plug AC Adapter (G) into Mount (A), and connect to AC outlet. Follow Remote (H) instructions for

operation.

H(x1)

Remote

G (x1)

AC Adapter

CHECK OUT OTHER GREAT PRODUCTS FROM

EXPLORE MORE AT VIVO-US.COM

WHO WE ARE

VIVO is more than a brand of ergonomic oice furniture. We are a team of

creative and innovative indivuduals working together to oer high quality,

aordable ergonomic solutions. We think and work outside of the box to serve

you, our customer, to the best of our abilitiy.

We oer a wide array of home & oice products

to fit your needs. From height adjustable desks to

monitor mounts to keyboard trays and more!

HEIGHT

ADJUSTABLE DESKS

MONITOR

MOUNTS

SPEAKER MOUNTS

& STANDS

We oer electric & manual

crank standing desks,

corner frames, desk & top

combos, and more!

From single monitor

mounts to hex mount,

gromment or clamp-ons,

we’ve got a mounting

solution for your setup.

Whether you’re mounting

a soundbar or surround

sound system, we’ve got

a mounting solution to fit

your needs

Table of contents

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 