Vivo STAND-SIT1W User manual

Sit to Stand Single Monitor Wall Mount Workstation -

Silver

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/stand-sit1w

SKU: STAND-SIT1W

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

PACKAGE CONTENTS

4.4 - 17.6lbs

(2 -8 kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualified technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

CAUTION!

DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO

MOUNT. We include mounting for brick and concrete walls. If unsure, please contact us at vivo-us.

com, email at [email protected]om, or call us at 309-278-5303.

A (x1)

Arm

B(x1)

Pole

C(x1)

Tray

D(x2)

Decorative

Cover

E(x2)

M8x24

F (x1)

4mm Allen

Wrench

G(x1)

6mm Allen

Wrench

H (x1)

Mount

I (x2)

Straps

M-A (x4)

M4x12

M-C (x4)

M4x16

M-B (x4)

M5x12

M-D (x4)

M5x16

M-F (x4)

Spacer

M-E (x4)

D5 Washer

W-A (x7)

Screw

W-C (x3)

Washer

W-B (x7)

Anchor

ASSEMBLY STEPS

OPTION A: Wood Stud Mounting

Hold arm (A) to wall where stud is located and mark top

hole location with a pencil. Drill 2.2” (55mm) deep hole

using a 3/16” (4.5mm) drill bit, and insert screw (W-A)

leaving 6mm of thread exposed. Hang arm on screw,

and making sure arm is level, mark 2 additional drilling

locations using the vertically aligned holes. Drill holes,

then mount arm using screws (W-A) with washers (W-C).

STEP 1

OPTION B: Concrete/Brick Mounting

Hold arm (A) to wall where desired and

mark top hole location with a pencil.

Drill 2.4” (60mm) deep hole using a 3/8”

(10mm) drill bit, and insert anchor (W-B).

Insert screw (W-A) leaving 6mm of thread

exposed. Hang arm on screw, and making

sure arm is level, mark 3 additional drilling

locations. Drill holes, insert anchors (W-B),

then mount arm using screws (W-A) with

washers (W-C).

6m m

W-B

W-C

W-A

TOOLS NEEDED

Phillips

Screwdriver Drill Pencil

STEP 2

Slide decorative covers (D) on

arm (A).

STEP 3

Remove knob and slide VESA

plate o from bracket. Set parts

aside for later use.

STEP 4

Remove two lower screws from

back of pole (B) and set aside.

Attach tray (C) to pole using

M8x24 bolts (E), and tighten

with 6mm Allen wrench (G).

Slide VESA plate with monitor onto mounting

bracket of pole (B) and secure with previously

removed knob.

STEP 7

Adjust gas spring strength using 6mm Allen

wrench (G). Turning clockwise will decrease

strength, and counter-clockwise will increase

strength.

STEP 8

Loosen top two screws on back of pole (B) until 5mm of thread is exposed on each. Slide pole onto

mount of arm (A). Attach with previously removed screws, and tighten all screws with 4mm Allen

wrench (F).

STEP 5

OPTION A: Flat Back Monitor

For flat back monitor, attach VESA

plate using 12mm screws (M-A or

M-B) with washers (M-E).

STEP 6

OPTION B: Curved Back Monitor

For curved back monitor, attach VESA

plate using 12mm screws (M-C or M-D)

with washers (M-E) and spacers (M-F).

5m m

1 2

M- A

M- B

M- E

M- C

M- D

M- E

M- F

NOTE: Tighten socket set screw if the joint

makes a popping noise.

Adjust height of monitor using knob on pole (B) as shown in diagram. Adjust tilt of monitor using

6mm allen wrench (G) as shown in diagram. Adjust rotation of tray (C) using 4mm allen wrench (F) as

shown in diagram if tray (C) is not level.

STEP 9

+4° -4°

+15°

-15°

STEP 10

To adjust tray to 10° tilt angle, first flip the tray up fully, then turn the supports in front of the hinge

upward. Set the keyboard tray back down. Allen wrenches (F, G) can be stored underneath the

keyboard tray as shown.

0°

10° 10 °

STEP 11

Turn knobs on mount (H) counterclockwise to remove. Take apart mount (H).

STEP 14

Place computer in mount (H) and tighten with straps (I).

Attach straps (I) to small half of mount (H) as shown in diagram. Place mount against wall where

desired and mark holes with a pencil. Drill 2.4” (60mm) deep holes using a 3/8” (10mm) drill bit, and

insert anchors (W-B). Use screws (W-A) to attach mount to wall.

STEP 12

STEP 13

Replace second half of mount (H) and secure with knobs as shown in diagram. Attach straps (I) to

second half of mount (H).

NOTE: The CPU mount is only designed for mounting to a brick or concrete wall.

W- B W- A

STEP 16

Insert cables making sure there is enough slack

for full movement, then re-install covers.

Adjust as Desired

STEP 15

Use screwdriver to remove screws securing

the cable covers.

+15°

-15°

180 °

LAST UPDATED: 03/06/2020

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

This manual suits for next models

Table of contents

Popular Desktop manuals by other brands

HP m9060n - Pavilion - Elite Quick setup

Asus

Asus E210 Series user guide

Dell

Dell Inspiron 600m quick start

Dell

Dell Inspiron 3662 Service manual

TotalFlow

TotalFlow uFLO user manual

HP Presario SV7000 - Desktop PC manual

HP ProDesk 400 G5 Maintenance and service guide

Logitech

Logitech MK320 quick start guide

Dell

Dell XPS 730 H2C Service manual

Sony

Sony Vaio Series operating instructions

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer quick start

Alto

Alto MD 250 instruction manual

Lenovo

Lenovo ThinkCentre Edge 72 Manual

Lenovo

Lenovo ThinkStation D20 Manual

Arbor Technology

Arbor Technology FPC-7800 Series user manual

Sony

Sony VAIO VGX-TP1 Series user guide

Asus

Asus Eee Box B204 user manual

Dell

Dell Optiplex 9010 All In One owner's manual