Vicon V992D-N4 Instruction manual

Quick User Guide Network Camera

Warning before installation

-Power off the Network camera if it is found to be smoking or smells unusual.

-Keep the Network camera away from water. If the Network camera gets wet, power

off immediately.

-Do not place the Network camera near heat sources, such as a television or oven.

-Refer to your product datasheet/specification for the operating temperature.

-Keep the Network camera away from direct sunlight.

-Do not place the Network camera in high humidity environments.

-Do not place the Network camera on unsteady surfaces.

-Do not touch the Network camera when there is lightning present.

-Do not disassemble the Network camera.

-Do not drop the Network camera.

-Do not insert any object, such as a screwdriver, into the Network camera.

For other safety and regulation information, refer to “User’s manual.”

1. Check Contents

No.

Item

Description

Network Camera

V992D-N4

Software CD

User’s manual, Utility software

Quick User Guide

This document

Accessories

Silica gel

Template for installation

Video monitor cable

Tapping Screw M4x30: 3 pcs

Anchor: 3 pcs

Screw M4x8: 4 pcs

Surface Mount Bracket

L-Wrench (T20)

Focus Adjust Ring

Anti-reflection collar (rubber)

2. Physical Description

Installation of Anti-Reflection Collar

Quick User Guide Network Camera

①Control Button

-Change Video output format NTSC/PAL (toggle)

-Factory Default (hold steadily for more than 10 seconds)

②Network LED

③Status LED

④Reset Button

⑤Video output for service monitor

⑥Lock nut

⑦Focus adjustment

⑧Network (RJ-45 PoE required)

3. Making Connection

Connect Ethernet cable to make a connection to the PoE hub.

The camera supports PoE only.

4. Assign IP Address

The default setting of the camera is set to “DHCP” and “UPnP” function is

set to ON. If you have a DHCP server on your network and UPnP function is

enabled on your PC you can find the network camera in “My network”.

If a DHCP server is not available on your network, assign IP address by

the following process.

Execute Multi Upgrade Tool (from the Installation CD). It will search cameras on

the network automatically.

1) After the list of detected devices appears, select the camera you are trying to

configure.

Quick User Guide Network Camera

2) Select the Network type as Static or DHCP. If Static is selected, enter all of the

network information for your camera.

3) Select the “Change IP Address” button. The message “Do you want to change IP

address?” will display; select “Yes” from the pop-up window.

4) Check the Type as Static or DHCP from the list.

Then double click the camera in the list; Internet Explorer® will open

automatically.

Quick User Guide Network Camera

5. Web Browser Connection

Note: The Network camera supports Internet Explorer 7 or above.

Please check version of your browser and update it if necessary.

When you first access the camera you need to download and install an

Active X control from the camera to display a Live View image.

Default User and Password are set to “ADMIN” and “1234”. Please type in

the user ID and password to connect the network camera.

Note: By Default the cameras come with “Installation Mode” set to “ON” to

enable Analog output. Additionally, all installation setup must be done prior

to the camera being used with a VMS, including ViconNet; the VMS forces

the Installation Mode to OFF. You must turn Installation Mode to Off to use

720p or 1080p streaming.

For further information on setup, refer to User’s manual on the software CD.

Table of contents

Other Vicon Security Camera manuals

Vicon

Vicon surveyor1000 Owner's manual

Vicon

Vicon Series 234-00-02 Operating instructions

Vicon

Vicon VC-600 Series User manual

Vicon

Vicon SurveyorVF SVFT-M User manual

Vicon

Vicon CE102D User manual

Vicon

Vicon Roughneck V2000D-PTZ User manual

Vicon

Vicon V898MSH User guide

Vicon

Vicon V7FCD User guide

Vicon

Vicon ROUGHNECK V910 User manual

Vicon

Vicon V1020-WIR-180 User manual

Vicon

Vicon Surveyor MKII Series XX282-00-01 User manual

Vicon

Vicon Cruiser SN663V-A Operating instructions

Vicon

Vicon VC275-24 User guide

Vicon

Vicon V930D User manual

Vicon

Vicon V980D Series User manual

Vicon

Vicon VC-630 User manual

Vicon

Vicon Surveyor 282-00-02 Series User manual

Vicon

Vicon V15CCM-IR-2 Series Rouchneck User manual

Vicon

Vicon CE202D-N User manual

Vicon

Vicon surveyor X971 User manual

Vicon

Vicon V682-PTZ User manual

Vicon

Vicon Roughneck AI V2008B-W310LPR User manual

Vicon

Vicon V992E User manual

Vicon

Vicon Roughneck V2100D Series User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications

Lumens

Lumens VC-A50PNW installation guide