VEVOR 19985-SN User manual

Technical Support and E-Warranty Certificate www.vevor.com/support

KNOB HANDLESETS

MODEL: 19985-SN / 20185-AC / 20185-10B

We continue to be committed to provide you tools with competitive price.

"Save Half", "Half Price" or any other similar expressions used by us only

represents an estimate of savings you might benefit from buying certain tools with

us compared to the major top brands and does not necessarily mean to cover all

categories of tools offered by us. You are kindly reminded to verify carefully when

you are placing an order with us if you are actually saving half in comparison with

the top major brands.

- 1 -

MODEL: 19985-SN / 20185-AC / 20185-10B

NOTE: The shown is for illustration purposes only. Please refer to the

color you purchased.

Have product questions? Need technical support? Please feel free to

contact us:

Technical Support and E-Warranty Certificate

www.vevor.com/support

NEED HELP? CONTACT US!

This is the original instruction, please read all manual instructions

carefully before operating. VEVOR reserves a clear interpretation of our

user manual. The appearance of the product shall be subject to the

product you received. Please forgive us that we won't inform you again if

there are any technology or software updates on our product.

KNOB HANDLESETS

- 2 -

SAFETY INSTRUCTIONS

1. This product contains small parts. If swallowed, it will pose a choking

hazard. Keep these small parts away from children !

2. Read, understand and follow your power tool manufacturer's

instructions for safety. Always wear safety glasses or eye shields before

assembly and commencing power tool operation. Always keep hands,

face, hair, loose clothing, and body at a safe distance from spindles and

cutting tools. Always keep a firm grip on tool handles when in operation.

Always disconnect from the power source before adjusting power tools.

MODEL AND PARAMETERS

Model 19985-SN 20185-AC 20185-10B

Color Satin Nickel Antique Copper Matte Black

Applicable Door

Thickness

1-3/8"~1-3/4"

Latch Length 2-3/8" and 2-3/4"

Pitch-row(Door Handle) 7-11/16"－8-13/16"

- 3 -

STRUCTURE DIAGRAM AND COMPONENTS

No. Name and Qty No. Name and Qty

1Front Handle x 1 2A Latch A x 1

2B Lower Latch x 1 3Cylinder x 1

4Deadbolt Rose x 1 5Strike Plate x 1

6Back Knob x 1 7Strike Plate x 1

8Strike Box x 1 9Screws x 8

10 Pin x 1 11 Door Key x 3

12 Washer x 1 13 User Manual x 1

1

2B

3

4

56

8

7

9

2A

10

11

12

13

- 4 -

INSTALLATION

1. MARK DOOR & BORE HOLES(Please refer to the attached opening diagram.)

A: Fold template over edgeof door,mark site 60mm or70mm of holes.

B: Bore the Φ54mm andΦ25mm holes through the door.

C: Cut out a 58x26x3mm base.

2. INSTALL THE LATCH

According to the site of lock holes to adjust the latch for 60mm or 70mm.

- 5 -

NOTE: The cam is pushed fully to the right for 70mm backset.(During the

adjustment, keeping two teeth of the cam to forward always.)

3. INSTALL EXTERIOR HANDLE MECHANISM

Place the front handle with stems and square spindle into the latch as

shown. Press tightly against the door face.

4. INSTALL THE INTERIOR KNOBS

After the front handle is in position, install the interior knoband tighten

screws. Insert screw through washer and into bottom hole tighten firmly.

Front Handle

(It is used to remove the back knob

after inserting the hole.)

- 6 -

5. INSTALL THE STRIKES

MAINTENANCE

1. Do not strike with force to avoid damage to the latch and door frame.

2. If there is dirt, use a dry cloth to remove, do not scrub with chemicals such as

dishwashing liquid. Otherwise, it will destroy the protective film of exposed parts

and cause fading.

3. Periodically (half a year or once a year) or when the key is not smoothly

inserted and removed, graphite powder (pencil powder) can be added in the

keyhole to lubricate.

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai

EC REP: SHUNSHUN GmbH. Römeräcker 9 Z2021,76351

Linkenheim-Hochstetten, Germany

UK REP：Pooledas Group Ltd. Unit 5 Albert Edward House, The Pavilions Preston,

United Kingdom

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW

2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place,

Rancho Cucamonga, CA 91730

Made In China

The locking bar is

pressed down when

the door is closed.

Technical Support and E-Warranty Certificate

www.vevor.com/support

This manual suits for next models

2

Table of contents

Popular Tools manuals by other brands

Martor

Martor SECUNORM 175 quick start guide

ERKCO

ERKCO 1000 user manual

jbc

jbc N4473 instruction manual

FEINMETALL

FEINMETALL FZWZ-SET-001 quick start guide

Worx Professional

Worx Professional Sonicrafter WU676 Original instructions

Gage Bilt

Gage Bilt GB713SH Original instructions

Hilti

Hilti DX 9-ENP Original operating instructions

norbar

norbar NORTRONIC 34399 Operator's manual

BGS technic

BGS technic 8578 manual

Makita

Makita DHR241 instruction manual

Motor Guard

Motor Guard JMB-1250 instructions

Power Adhesives

Power Adhesives 805-12 operating instructions

Clemco

Clemco 24189 quick start guide

VVG

VVG VNG 903 Series instruction manual

Hilti

Hilti FX 3-A operating instructions

Grizzly

Grizzly H6472 Manual insert

axing

axing BWZ 5-02 Operation instructions

Dh-Robotics

Dh-Robotics RGI-100 Short manual