VADO NOTION User manual

Guarantee

WHERE

INSPIRATION

FLOWS

NOTION

2 handle, 2 outlet thermostatic shower valve

User Guide

Keep for future reference

All VADO products come with a 2 year guarantee as standard. Within this guarantee period

VADO will provide replacement parts and any labour [SEE NOTE 1] needed to complete the

product repair.

This standard guarantee may be extended by registering your product to give up to a 15 year

guarantee period. Once registered:

VADO chromed brassware and stainless steel products have a 15 year guarantee

(2 years parts and labour plus 13 years parts only).

VADO Sensori SmartTouch and SmartDial products have a 5 year guarantee

(parts and labour).

VADO Identity and i-tech products have a 5 year guarantee (2 year parts and labour plus 3

years parts only).

All other VADO products have a 3 year guarantee (2 years parts and labour plus 1 year parts only)

[SEE NOTE 2].

Guarantee Conditions

Our products are guaranteed against manufacturing defects from the date of purchase until

the expiry of the relevant guarantee period shown above.

The guarantee is only valid if:

•The product has been installed, used and maintained in accordance with VADO’s

instructions and subjected to normal use only.

•The defect is not due to use of an unsuitable or inadequate water or power supply.

•The defect is not due to accident, misuse, neglect or incorrect/inappropriate repair (other

than by VADO or VADO authorised agents) or damage caused by foreign objects

or substances.

•The extended guarantee is only available if you have completed the Guarantee

Registration Process.

This can be done via the VADO website or via phone to our aftersales team.

Registration must be completed within 6 months from date of purchase.

Under the extended guarantee period VADO will, at its option, offer to supply any

replacement product (or component part) assessed to be defective [SEE NOTE 3].

The guarantee (whether standard or extended) is non-transferable to any subsequent owner.

All claims under the guarantee should be notified in the first instance to our Aftersales

department, contact details below, this must be done no later than the last day of the

relevant guarantee period.

All claims must be accompanied by proof of purchase (sales receipt or delivery note) from

an official VADO dealer.

The guarantee does not extend to any consequential loss or damage.

After repair or replacement, the relevant guarantee period will be calculated from the

original date of purchase.

VADO operates a policy of continuous product development and therefore reserves the right

to change the product, packaging and documentation specifications without notice. E&OE.

NOTES:

[1] Labour via our engineer network is only available in the UK. Attendance by a VADO

engineer or sub-contract engineer will be under our standard terms and conditions.

[2] VADO spare parts and shower hoses are under a parts only guarantee.

[3] VADO reserves the right to charge in advance for a product (or replacement part)

pending collection and investigation (at VADO expense) to confirm a defect is due to a

manufacturing issue.

If a defect is found the charge will be refunded or cancelled.

This guarantee is in addition to and does not affect your statutory rights as a consumer.

Tel: 01934 745163

Email: aftersales@vado.com

Welcome

Thank you for choosing VADO

Our products can be found in some of the most prestigious

hotel, commercial and residential developments across the

world, therefore you can expect exceptional product quality and

outstanding customer service.

This product has passed through stringent quality assurance

processes coupled with demanding lifecycle mechanical testing

to ensure it reaches the exacting standards that allow us to

offer our premium 15 year guarantee.

We work to ensure our product designs are harmonious with

all sanitaryware, so when you choose VADO, your choice of

coordinating items is unlimited.

With VADO, you can really let your inspiration flow.

For any technical or operational queries please contact our

experienced aftersales team on 01934 745163.

Cleaning instructions:

The electroplating on this product is finished to the highest

standard. Due care needs to be taken to ensure the

appearance is retained.

We recommend cleaning all products with a soft damp cloth

ONLY and advise strongly against the use of all aggressive/

corrosive cleaning products i.e. powders and liquids. If

these instructions are not followed, this may invalidate your

guarantee in the event of a problem occurring.

VADO, Wedmore Road, Cheddar, Somerset, England BS27 3EB

tel 01934 744466 fax 01934 744345

aftersales@vado.com

www.vado.com

Turning the flow control in the direction of the arrows

increases the flow of water to the outlets.

Operation - flow control

Handset

outlet

Outlet 1

Off

Outlet 1 &

Handset outlet

Handle in Off position

(handle mark at 12 o’clock)

Cold

Hot

Turning the temperature control handle in the direction of

the arrows increases/decreases the temperature

Operation - temperature control

Cold

6 7

Removing the Cartridge

1. Remove handle assemblies and faceplate allowing access to

the isolation points on the valve.

2. Screw down the isolation screws clockwise until you

feel resistance (taking care not to over tighten). Ensure the

thermostatic valve has been successfully isolated.

See page 9 for correct procedure.

3. Remove the screw, spline adaptor, connecting rod and stop

ring.

4. Unscrew and remove the securing nut.

5. Carefully pull out the thermostatic cartridge.

6. Clean filters by rinsing them under running water to remove

any debris.

7. If there is limescale deposits then it is recommended to

immerse the cartridge for a few minutes in 50% white vinegar

+ 50% hot water, brush the filters gently and then rinse under

running water to clean all particles. If this is not effective, a

replacement cartridge should be fitted.

Maintenance Maintenance

We advise that the below is carried out annually as failure to do

so may result in invalidation of warranty.

Shut off the water supply to both hot and cold inlets, before

commencing any maintenance work below.

See isolation procedure on page 9.

Thermostatic cartridge

This thermostatic valve is fitted with a single filtering facility.

Filters are fitted on the thermostatic cartridge. Depending on

the water quality, filters may become dirty, causing reduced

flow and inefficient working of the valve. To clean the filters, you

must first remove the cartridge from the housing.

Securing

nut

Stop ring

Connecting

rod

Screw

Spline

adaptor

Cartridge O-ring

O-ring

Filter

Filter Grub screw

Locating

slot

Isolation

screws

Maintenance

8. Before reassembling the cartridge, clean its housing with

a wet cloth and grease the O-rings using a suitable silicone

grease, insert the thermostatic cartridge to the valve body

ensuring the grub screw is aligned with the slot.

9. Screw the securing nut on and tighten.

10. Place the temperature stop ring on the cartridge so the step

is located at 8 o’clock.

11. Place the connecting rod, spline adaptor and screw back

onto the cartridge.

12. Turn the water supply on via the isolating valves.

13. Check the water temperature to ensure correct

commissioning.

See page 15 of the installation instructions or Vado.com for

commissioning.

11. Replace handle assemblies and faceplate.

Step

Isolation procedure

IMPORTANT: Please see the below procedure for isolating this

thermostatic valve.

1. Remove handles/faceplate and trim parts allowing access to

the isolation points on the valve.

2. Screw down the isolation screws clockwise until you feel a

resistance (taking care not to over tighten).

3. Turn shower on to check isolation, please ensure that

your body/hands are not under the flow of water as there is a

potential for delivery of hot water.

4. Remove temperature stop ring (essential).

5. With shower in the on position, replace temperature handle

on thermostatic valve (ensure temperature stop ring has been

removed).

6. Turn temp handle fully anti clockwise until stop point is

reached and can be turned no further, please ensure that your

body/hands are not under the flow of water as there is potential

for delivery of hot water if isolation has been unsuccessful.

7. Turn temperature handle fully clockwise until resistance is

felt.

8. If there is no flow of water coming from the outlet during

both points 6 and 7 isolation has been successful, you may now

remove and maintain the cartridge.

9. If at any of the above points water continues to flow please

isolate at an alternative point within the system for both hot and

cold and repeat points 3-9.

Maintenance

Parts list:

Parts:

2 handle,2 outletthermostatic shower valve

TAB-148/2WO-NOT-CP

Keep for future reference

Installation Guide

NOTION

WHERE

INSPIRATION

FLOWS

NOTION

2handle, 2 outlet thermostatic shower valve

UserGuide

Keep for future reference

13 14 15

Item Code Quantity

1FL-802-33/2MX 1

2V-704-34S 1

3TAB-003A-FIL 1

4TAB-003A-FIL-HOUSING 1

5TAB-STOPRING 1

6TAB-NUT/TEMP-BRA 1

7TAB-NUT/FLOW-BRA 1

8TAB-DIV/EXTSPLINE-BR 1

9TAB-COG-BRA 1

10 TAB-1/FLOW-NOT-C/P 1

11 TAB-1/TEMP-NOT-C/P 1

12 TAB-DIV/COVERNUT-BRA 1

13 TAB-WO/SPIGOT-BRA 1

14 TAB-0024WO-NOT-CP 1

15 INS-HANDSET-C/P 1

16 SH-013-150-CP-LB 1

17 CEL-CON-3/4MX1/2F-BR 1

18 INSTALLATION GUIDE &

USER MANUAL 1

Table of contents

Other VADO Plumbing Product manuals

VADO

VADO te Installation and operating instructions

VADO

VADO SYNERGIE SYN-100 User manual

VADO

VADO AXCES BOKX AX-BOK-149T-RRK-CP Instruction Manual

VADO

VADO wg-rrk/div-148 Installation and operating instructions

VADO

VADO warwick Installation and operating instructions

VADO

VADO Zoo Installation and operating instructions

VADO

VADO AXCES NURI AX-NUR-137-CP Instruction Manual

VADO

VADO AXCES ASTRA AX-AST-136/CD-CP Instruction Manual

VADO

VADO Life Installation and operating instructions

VADO

VADO AXCES IRLO AX-IRO-123+K-CP Instruction Manual

VADO

VADO LIFE LIF-123T-CP User manual

VADO

VADO Life Installation and operating instructions

VADO

VADO Axces IRLO AX-IRO-130+K-CP Instruction Manual

VADO

VADO INDIVIDUAL ELEMENTS User manual

VADO

VADO Axces METIZ Instruction Manual

VADO

VADO VECTA AXCES AX-VEC-106/CD-CP User manual

VADO

VADO AXCES AX-AVA-145A-CP Instruction Manual

VADO

VADO WG-095S-C User manual

VADO

VADO AXCES VALA AX-VAL-100-CP Instruction Manual

VADO

VADO Origins Installation and operating instructions

VADO

VADO AXCES ASTRA AX-AST-106/CD-CP User manual

VADO

VADO EDIT User manual

VADO

VADO AXCES VECTA AX-VEC-136/CD-CP Instruction Manual

VADO

VADO AXCES ASTRA Series Instruction Manual

Popular Plumbing Product manuals by other brands

Weka

Weka 506.2020.00E ASSEMBLY, USER AND MAINTENANCE INSTRUCTIONS

Kohler

Kohler K-6228 Installation and care guide

UBERHAUS DESIGN

UBERHAUS DESIGN 75175017 Operator's manual

American Standard

American Standard DetectLink 6072121 manual

Uponor

Uponor Contec TS Mounting instructions

Pfister

Pfister Selia 49-SL Quick installation guide

Fortis

Fortis VITRINA 6068700 quick start guide

Fortis

Fortis MILANO 78211JS installation instructions

Kohler

Kohler K-12183 Homeowner's guide

Maxxus

Maxxus MX-M206-01 instruction manual

Moen

Moen 5922 Series installation instructions

Viega

Viega Prevista Pure 8512 Instructions for use

Kohler

Kohler Centerset K-15240 Homeowner's guide

Viega

Viega Prevista Dry 8522.33 Instructions for use

Sanela

Sanela Lema SLP 59RB Instructions for use

Elkay

Elkay EDF15AC Installation, care & use manual

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Instructions for use/assembly instructions

baliv

baliv WT-140 manual