TOTALINE BASIC 1H User manual

Operating Manual

Mode d'emploi

Manual de Uso

Totaline ®Basic 1H/1C & 2H/1C

Non-Programmable Thermostats

Thermostat non programmables

Termostatos no programables

570-207 IIIIIIIIIIIIIIIIIIIIIIII

69-2256EFS

Totaline Basic 1H/1C & 2H/1C

This manual covers the following models:

P310-0110: For 1-Heat/1-Coot systems

P310-0210: For 2-Heat /1-Cool heat pump systems

(Remove the thermostat from its wallplate to find the model number.)

CAUTION: EQUIPMENT DAMAGE HAZARD.

To prevent possible compressor damage, do not use Cooling mode when the

outdoor temperature is below 50 °F (10 °C).

E0r assistance with this product please visit www.totaline.com

Read and save these instructions.

® U.S. Registered Trademark. Patents pending.

Operating Manual 570-207

i_1qFJ__

Overview

Thermostat features ............................. 1

Quick reference to controls .................. 2

Quick reference to display. ................. 3

Operation

System switch (Heat/Cool) ................... 4

Fan switch (Auto/On). ........................... 5

Temperature controls ............................ 6

Compressor protection ......................... 7

Appendices

Battery replacement ............................. 8

In case of difficulty ................................ 9

Customer assistance .......................... 10

Limited two-year warranty ................... 11

Totaline Basic 1H/1C & 2H/1C

Your new Totaline thermostat has been designed to give you many years of

reliable service and easy-to-use, push-button climate control.

Features

• Backlit display is easy to read

• Displays ambient (measured) temperature at all times

• One-touch access to setpoint temperature

• Built-in compressor protection

Operating Manual 570-207

f2Tnm_IT__ i_ _ _

Screen

Lit for 12 seconds when

you press any button. Up/Down buttons

Press to adjust temperature

System switch (see page 4)

• Cool: System is in Cooling mode.

• Off: System is off.

• Heat: System is in Heating mode.

•Em Heat: System is in Emergency Heat mode.

Fan switch (see page 5)

• On: Fan runs continuously.

• Auto: Fan runs onlywhen heating or cooling is

activated.

Totaline Basic 1H/1C & 2H/1C

Low-battery warning (see page 8)

System status

•Cool @ : Cooling is activated. *

• Heat 8 : Heating is activated. *

• Stg2: Auxiliary heat is activated. **

Setpoint indicator

Appears when the setpoint

temperature is displayed.

Temperature display

The ambient (measured)

temperature is normally

displayed. To view the

setpoint temperature, press

either of the temperature

adjustment buttons once.

The setpoint temperature

will appear for five seconds.

* If Heat 8 or Cool _ is flashing, compressor protection is engaged (see page 7).

** Applies to P310-0210 model only.

Operating Manual 570-207

Use the System switch to place the system in

one of the following modes.

• Cool: System is in Cooling mode.

• Off: System is off.

• Heat: System is in Heating mode.

• Em Heat: System is in Emergency Heat

mode. Only auxiliary heating can be

activated. The compressor is disabled. (This

mode is available on the P310-0210 model

only.)

CAUTION: EQUIPMENT DAMAGE HAZARD

Do not use Cooling mode when the outdoor temperature is below 50 °F (10 °C).

!ii

Totaline Basic 1H/1C & 2H/1C

i_/ o i' ii

l__J o ,, iii

Use the Fan switch to select the fan

operation.

•Auto: The fan runs only when heating

or cooling is actually taking place

(commonly used setting).

• On: The fan runs continuously. Use

this setting for improved air circulation

or for more efficient air cleaning.

Operating Manual 570-207

_ Press the Up or Down button once to

i!_ _ display the setpoint temperature.

0_ Press either button more than once to

•change the setpoint.

Totaline Basic 1H/1C & 2H/1C

I:t'!'11I11_E@liil_

Your thermostat has a feature that helps prevent damage to the compressor of

your air conditioning or heat pump system. Because damage can occur if the

compressor is restarted too soon after shutdown, this feature forces the

compressor to wait 5 minutes before restarting. During the wait time, the message

Cool e or Heat _ flashes on the screen. When the safe wait time has elapsed,

the message stops flashing and the compressor turns on.

Other manuals for BASIC 1H

This manual suits for next models

Table of contents

Languages:

Other TOTALINE Thermostat manuals

TOTALINE

TOTALINE P374-1 900 User manual

TOTALINE

TOTALINE P700U-21NHP User manual

TOTALINE

TOTALINE P374-2900 User manual

TOTALINE

TOTALINE Easy 1H/1C User manual

TOTALINE

TOTALINE Intellistat User manual

TOTALINE

TOTALINE 1 For All User manual

TOTALINE

TOTALINE 1 For All User manual

TOTALINE

TOTALINE P374-1 700 User manual

TOTALINE

TOTALINE 1 For All User manual

TOTALINE

TOTALINE P474-1035 User manual

TOTALINE

TOTALINE Deluxe 1H/1C User manual

TOTALINE

TOTALINE P474-0140 User manual

TOTALINE

TOTALINE Thermostat Assembly instructions

TOTALINE

TOTALINE P474-0220 User manual

TOTALINE

TOTALINE P360-1320 User manual

TOTALINE

TOTALINE EZ3 Manual

TOTALINE

TOTALINE P710U-21PHP User manual

TOTALINE

TOTALINE 21PHP Assembly instructions

TOTALINE

TOTALINE P274-21 00 User manual

TOTALINE

TOTALINE P340-2220 User manual

TOTALINE

TOTALINE Signature User manual

TOTALINE

TOTALINE Smart 1H/1C User manual

TOTALINE

TOTALINE P374-2 700 User manual

TOTALINE

TOTALINE P374-1500 User manual

Popular Thermostat manuals by other brands

EWELLY

EWELLY EW-181 manual

Prolon

Prolon T1100 Hardware guide

Computherm

Computherm Q20 operating instructions

Heatmiser

Heatmiser neoStat user manual

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA user manual

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat user manual

Saswell

Saswell SAS920XWHB-7-S-RF User manual and warranty card

Aircalo

Aircalo TFP1-ET85P2 operating manual

Honeywell

Honeywell CM721 user manual

Carrier

Carrier DEBONAIR 33CS Installation and operating instructions

Lennox

Lennox iHarmony Zone Thermostat Installation and setup guide

Gemtech

Gemtech GT7000 Operation

Rollei

Rollei Smartes 45000 manual

Sinope

Sinope TH1300RF user guide

Honeywell

Honeywell RLV4305 owner's guide

Honeywell

Honeywell Prestige 2.0 THX9421 manual

NuTone

NuTone NTBZ48 Installation & operation guide

Stelpro

Stelpro MAESTRO ASMT402AD user guide