TOTALINE 1 For All User manual
OWNER'S MANUAL
P/N P374-2200
Commercial Systems & Services Carrier Corporation 05/02
7 Day programmable
Pre-Programmed
Occupied Comfort
Unoccupied Energy
Savings
Auto Changeover
Easy To Read Display
Thermoglow Backlight
Multi-Stage, One for All
3 Security Levels
Use with most Air Conditioning & Heating Systems including: 1 or 2 Stage
Electric Cooling & Gas Heating, Heat Pump, Electric or Hydronic Heat.
*
*
TOTALINE
Programmable
Digital Thermostat
1 For All
68
74
HEAT
COOL
o
o
Am
6:03
68
Su
TOTALINE
Meets California Title 24
OCCUPIED 1
Table Of Contents
FRONT PANEL
DISPLAY
QUICK START Set the clock and go
BASIC OPERATION
PROGRAMMING Occupied / Unoccupied
ADVANCED SETUP
ABOUT ADVANCED OPERATION
WARRANTY
Page 1
CAUTION
Follow Installation Instructions before proceeding.
SET THERMOSTAT TO MODE “OFF” PRIOR TO
CHANGING SETTINGS IN SETUP OR RESTORING
FACTORY DEFAULTS.
2
3
5
6
8
12
16
20
Commercial Systems & Services Carrier Corporation 05/02
P/N P374-2200
68
74
HEAT
COOL
o
o
Am
6:03
68
Su
TOTALINE
OCCUPIED 1
Front Panel
Page 2
Backlit LCD Display
Warmer or + Button
Cooler or - Button
Override Button
Heat or Cool Indicator
Red = Heat, Green = Cool
67
70
HEAT
COOL
AUTO
o
o
Am
6:03
68
S
Programmable
Thermostat
PROGRAM SET CLOCK
HOLIDAYFAN
ProgramHoliday
Fan Set Clock Override
Mode
MODE
1
2
4
3
Mode Indicators
Selects the operation mode of the equipment.
HEAT - indicates the heat mode.
COOL - indicates the air conditioning mode.
AUTO - indicates the system will automatically
changeover between heat and cool modes
as the temperature varies.
OFF - indicates the entire system is turned off.
PROGRAM ON - indicates the stored program
is enabled to run. Page 6.
Clock with Day of the Week
Indicates the current time and day. This clock is
also used to program the timer periods. Page 5.
Room Temperature Display
Indicates the current room temperature.
Desired Set Temperature
Indicates desired room temperature(s). Page 7.
Display
Page 3
1
1
1
3
4
4
7
9
10
6
88
88
HEAT
COOL
OFF
AUTO
Program
Locked
unoccupied123
Setup
On
StartStop
o
o
Am
Pm
i2 00
88
:
5
SuMTuWThFSa
Fan On
Service Filter
Override
2
8
1
5
6
7
9
10
Override Indication
Indicates the current program is currently being
overridden for up to 4 hours. Page 7,16.
Occupied or Unoccupied Indication
Indicates the program number: Occupied 1,2,3,
or Unoccupied. Page 8-11.
Setup Indication
Indicates the thermostat is in the programming
mode. Page 12.
Locked Indication
Locked appears after the right combination of
buttons are pressed, rendering the buttons
inoperative. Page 18.
Start / Stop Indication
Start or Stop appears when programming
timer functions. Page 9.
Fan Operation Indication
Fan On - indicates constant, continuous fan
operation.
When Fan On is not lit - indicates the fan will
only operate when necessary to heat or
to cool. Page 12.
Display
Page 4
8
Quick Start Set the Clock and Go
Page 5
Press the SET CLOCK
button.
Press the SET CLOCK
button as above to
return to normal
operation.
This thermostat is preprogrammed from the
factory to operate 1 or 2 Stage equipment without
the need for further programming. To optimize the
installation of this thermostat follow the instructions
in the Advanced Setup section.
* The thermostat is not preprogrammed from the
factory to operate electric heat or heat pump systems.
To control these systems, follow the steps in the
Advanced Setup section, pages 12 & 13.
2
Setup
M
buttons.
To adjust the
clock or Day use
Press
Setup
Am
12:00 i
:
SET CLOCK
SET CLOCK
MODE
During Setup & Programming:
Pressing the Mode button
selects different flashing items.
(Represented in dark black)
Pressing the Up and Down
buttons will modify the flashing
selection.
Basic Operation
Page 6
The HEAT setting indicates the
temperature the room has to
reach before the furnace will
turn on to heat the room.
The COOL setting indicates the
temperature the room has to
reach before the air conditioner
will turn on to cool the room.
OFF indicates both heating
and air conditioning
systems are turned off.
AUTO will automatically select
heat or cool based on room
temperature demand.
Program On will activate the
stored timer operation.
(Occupied or
Unoccupied Periods)
Select Mode
69
HEAT
o
Pm
12:00
70
M
:
72
COOL
o
Pm
12:00
70
M
:
69
72
HEAT
COOL
AUTO
o
o
Pm
12:00
70
M
:
OFF
Pm
12:00
70
M
:
70
73
HEAT
COOL
Program On
o
o
Pm
12:00
70
Occupied 1
M
:
Press
MODE
Press
Press
Press
MODE
MODE
MODE
Override
Page 7
Basic Operation
During programmed, unoccupied periods
a press of the Override button will force
the thermostat into Occupied 1 comfort
settings, temporarily, for 30 minutes.
Pressing the override button when the
countdown timer is less than 30, will
reset the timer to 30 minutes. If the timer
displays 30 minutes, the next press will
zero out the override timer, returning
to unoccupied.
When in Override, the Override icon and
the Occupied 1 icon appear on the display.
The time of day clock alternates with the
time remaining in override.
During Override, the setpoints are
adjustable, provided the keypad is not
locked.
Press
OVERRIDE
unoccupied
Occupied 1
Override
Pm
Pm
0:30
I2:00
buttons.
In any mode, adjust the
desired Set Temperature
with
Pressing the up/down buttons in Auto mode will adjust both the heat and cool
set temperatures simultaneously.
Pressing the up/down buttons in Heat or Cool modes will adjust only the
heat or cool set temperature.
Select Desired Temperature
69
72
HEAT
COOL
AUTO
o
o
Pm
12:00
70
M
:
55
72
85
74
HEAT
HEAT
COOL
COOL
o
o
o
o
Pm
I2:00
65
65
M
M
Programming Occupied & Unoccupied Periods
Page 8
Press
Press
Press
Press
Continued
Select the maximum # of
occupied periods to be
used on any one day.
Typically 1.
(1,2 or 3)
Adjust the cooling
setpoint for occupied 1.
Adjust the cooling
setpoint for unoccupied
periods.
Adjust the heating
setpoint for occupied 1.
(35 - 99 )
(35 - 99 )
(35 - 99 )
MODE
MODE
MODE
MODE
occupied 1
74
occupied COOL
1
74
72
occupied COOL
HEAT
1
85
unoccupied
COOL
Press the PROGRAM button to enter time period programming.
Press
PROGRAM
MODE
Programming Occupied & Unoccupied Periods
Page 9
Press
Press
Press
Press
Press
Continued
Adjust the heating set-
point for unoccupied
periods.
(35 - 99)
Select the day for
Occupied 1.
Adjust the stop time
for occupied 1.
Select Occupied 1 to run
on this day (On), or not to
run this day (Off).
Adjust the start time
for occupied 1.
(M - Su)
Off
On
MODE
MODE
MODE
MODE
65
unoccupied
HEAT
occupied
M 1
occupied
Am Start
M 1
7:00
occupied
Pm Stop
M 1
6:00
occupied
ON
M 1
Other manuals for 1 For All
4
This manual suits for next models
1
Table of contents
Other TOTALINE Thermostat manuals
TOTALINE
TOTALINE Easy 1H/1C User manual
TOTALINE
TOTALINE TST-EGND06413SCS00 User manual
TOTALINE
TOTALINE P474-1020 User manual
TOTALINE
TOTALINE Signature CPV210 User manual
TOTALINE
TOTALINE CPV220 User manual
TOTALINE
TOTALINE Deluxe 1H User manual
TOTALINE
TOTALINE P700U-21NHP User manual
TOTALINE
TOTALINE Programmable Thermostat Assembly instructions
TOTALINE
TOTALINE 1 For All User manual
TOTALINE
TOTALINE Comfort Call P374-0433 User manual
TOTALINE
TOTALINE P374-1000 User manual
TOTALINE
TOTALINE BASIC 1H User manual
TOTALINE
TOTALINE P474-0220 User manual
TOTALINE
TOTALINE SIGNATURE CPV230 User manual
TOTALINE
TOTALINE EZ3 Manual
TOTALINE
TOTALINE P374-2900 User manual
TOTALINE
TOTALINE 1 For All User manual
TOTALINE
TOTALINE P374-1100FM User manual
TOTALINE
TOTALINE Smart P330-0110 User manual
TOTALINE
TOTALINE Intellistat User manual
Popular Thermostat manuals by other brands
Saswell
Saswell SAS920XWHB-7-S-RF User manual and warranty card
Aircalo
Aircalo TFP1-ET85P2 operating manual
Honeywell
Honeywell CM721 user manual
Carrier
Carrier DEBONAIR 33CS Installation and operating instructions
Lennox
Lennox iHarmony Zone Thermostat Installation and setup guide
Gemtech
Gemtech GT7000 Operation
