TOTALINE EZ3 Manual
Product Training Content
Installer Settings manual
SYSTEM SETTINGS
Default Settings 3
Initiate Installer Settings 3
Installer Setting Options 4
INSTALLER SETTINGS
Indoor Equipment Type/Stages 7-8
Outdoor Equipment Type/Stages 9-10
Auto Allowed 11
Programmable or Non-Programmable 12
Fahrenheit or Celcius 13
Smart Recovery 14
Fan On with W 15
Reversing Valve 16
Indoor Temp Offset 17
Indoor Humidity Offset 18
TABLE OF CONTENTS
Auto Changeover 19
Remote Sensor 20
Cool Lockout 21
Time Between Fuel Types 22
Cycles Per Hour 23
Humidifier 24
Dehumidifier 25
Max Heat/Min Cool Set Point 26-27
Aux Heat Lockout 28
Heat Pump Lockout 29
Stage Delay 30
Forced Stage Up 31
Differential 32
Air Filter Reminder 33-34
System Setting Restore Defaults 35
2
2
SYSTEM SETTINGS
SYSTEM SETTING DEFAULTS
SYSTEM SETTINGS DEFAULT
Indoor Equip Type
Indoor Equip Stages
Outdoor Equip Type
Outdoor Equip Stages
Auto Allowed?
Prog or Non-Prog
Fahrenheit or Celsius
Smart Recovery
Fan On with W
Reversing Valve
Indoor Temp Offset
Indoor HUM Offset
Auto Changeover
Remote Sensor
Cool Lockout
Time B/W Fuel Types
Cycles per Hour
Humidifier
Dehumidifier
Max Heat Setpoint
Min Cool Setpoint
Aux Heat Lockout
HP Lockout
Stage Delay
Forced Stage Up
Differential
Air Filter Reminder
FURNACE
1
A/C
1
YES
PROG
°F
YES
YES
COOL
0°F
0%
30 MIN
NONE
55°F
15 MIN
4
NO
NO
88°F
52°F
OFF
OFF
10 MIN
30 MIN
0.5°F
3000 HRSFURNACE
3
INITIATE INSTALLER SETTINGS
4
Off Mode
Selected Press and Hold
5 Seconds
DEFINITION DEPENDENCIES FUNCTION
To invoke the “System Settings Screen” the end
user must first navigate to the “Mode Screen”
and then ensure that the Mode is set to Off and
then go to the “Fan Screen” and press and hold
the Fan Button for 5-seconds. Once this
sequence is completed, the “System Settings
Screen” screen will be displayed allowing the
end user (or installer) to make changes to
advanced settings on the thermostat.
None Once the “System Settings Screen” is
displayed, the end user has the option to
“Up Swipe” and “Down Swipe” to navigate
through multiple advanced settings
options for the thermostat. The yellow
Row Indicator at the right side of these
screens indicates the location of the list of
advanced settings options and can also be
pushed upward or pulled downward to
navigate through the settings options.
INSTALLER SETTING OPTIONS
5
6
66
INSTALLER SETTINGS
SETTINGS – INDOOR EQUIPMENT TYPE
7
DEFINITION DEPENDENCIES FUNCTION
Pressing the Indoor Equip Type field in
the “System Settings Screen” will invoke
the “Indoor Equip Type Screen” which
allows for selection of the type of indoor
equipment being used. Options for the
indoor equipment type include
FURNACE and AIR HNDLR. Once the
correct indoor equipment type is
selected, pressing the Save Button will
save the selection into non-volatile
memory.
None INDOOR EQUIPMENT — An indoor equipment type
must be chosen so that an airflow source is
available to the system operation. The two types of
indoor equipment defined for operation are a
FURNACE and an AIR HANDLER (sometimes also
referred to as a FAN COIL). The indoor equipment
is not required to have a heat source present, which
is selectable with the Indoor Equipment Stages
setting. If control of a PACKAGE UNIT is desired
and the PACKAGE UNIT has a natural or propane
heating source installed, the FURNACE option
should be selected.
If the INDOOR EQUIPMENT type of FURNACE is
chosen and the OUTDOOR EQUIPMENT type of
HP is chosen, then the defined DUAL FUEL
thermostat operation will be used for heating.
SETTINGS – INDOOR EQUIPMENT STAGES
8
DEFINITION DEPENDENCIES FUNCTION
Pressing the Indoor Equip Stages field in
the “System Settings Screen” will invoke
the “Indoor Equip Stages Screen” which
allows for selection of the number of
stages for the indoor equipment being
used from 0 to 2.
The option of “0” INDOOR
EQUIPMENT STAGES is only
available if the INDOOR
EQUIPMENT TYPE of AIR
HNDLR is selected
INDOOR EQUIPMENT STAGES — The
numbers of stages chosen defines the
number of gas heating stages or aux
heating stages that are present in the
indoor equipment.
SETTINGS – OUTDOOR EQUIPMENT TYPE
9
DEFINITION DEPENDENCIES FUNCTION
Pressing the Outdoor Equip Type field
in the “System Settings Screen” will
invoke the “Outdoor Equip Type
Screen” which allows for selection of
the type of outdoor equipment being
used. Options for the outdoor
equipment type include NONE, HP
and A/C.
If NONE is chosen for the outdoor
equipment, then no cooling will be
available and the COOL MODE will be
disabled on the “Mode Screen”. The
OUTDOOR EQUIPMENT STAGES setting
will also be forced to a value of “0” if
NONE is selected for the outdoor
equipment type. The COOL TO
DEHUMIDIFY functionality would also be
disabled if the NONE is chosen for the
outdoor equipment type.
OUTDOOR EQUIPMENT — An
outdoor equipment type is not
required to be chosen and result in
a selection of NONE.
If the INDOOR EQUIPMENT type of
FURNACE is chosen and the
OUTDOOR EQUIPMENT type of
HP is chosen, then the defined
DUAL FUEL thermostat operation
will be used for heating.
Other manuals for EZ3
1
Table of contents
Other TOTALINE Thermostat manuals
TOTALINE
TOTALINE P374-1800 User manual
TOTALINE
TOTALINE P474-0130 User manual
TOTALINE
TOTALINE P374-1100FM User manual
TOTALINE
TOTALINE Deluxe 1H/1C User manual
TOTALINE
TOTALINE P374-1800 User manual
TOTALINE
TOTALINE TotalTouch P286-1600 User manual
TOTALINE
TOTALINE P374-2900 User manual
TOTALINE
TOTALINE P374-1 900 User manual
TOTALINE
TOTALINE 21PHP Assembly instructions
TOTALINE
TOTALINE P274-21 00 User manual
TOTALINE
TOTALINE Gold P274-1100 User manual
TOTALINE
TOTALINE Easy 1H/1C User manual
TOTALINE
TOTALINE Easy 1H/1C User manual
TOTALINE
TOTALINE Signature CPV230LA User manual
TOTALINE
TOTALINE SIGNATURE CPV230 User manual
TOTALINE
TOTALINE P710U-21PHP User manual
TOTALINE
TOTALINE TST-EGND06413SCS09 User manual
TOTALINE
TOTALINE Smart P330-0110 User manual
TOTALINE
TOTALINE Signature User manual
TOTALINE
TOTALINE Intellistat User manual
Popular Thermostat manuals by other brands
Saswell
Saswell SAS920XWHB-7-S-RF User manual and warranty card
Aircalo
Aircalo TFP1-ET85P2 operating manual
Honeywell
Honeywell CM721 user manual
Carrier
Carrier DEBONAIR 33CS Installation and operating instructions
Lennox
Lennox iHarmony Zone Thermostat Installation and setup guide
Gemtech
Gemtech GT7000 Operation
