Toshiba V Series User manual

6F8C0887

    

Second Edition February 2017

The contents of this manual may be revised without notice.

No part of this manual may be reproduced in any form without permission.

Safety Precautions

Theinstruction manual and the labels affixed to the products or equipment give important

information for using products safely. It helps prevent damageto properties and hazard to people

whousethem or workwith them.

Makeyourself familiar with the signal wordsand signs in this page，then read the safety

precautions that follow and always follow the instructions to avoid hazards.

Explanation ofsignal words

Signal word is aword that designates adegree or level of hazard seriousness.

ThewordsWARNINGand CAUTIONare used for the products.

Indicates apotentially hazardous situation which could

AWARNING result in death or serious injury，if you do not follow the

instructions.

ACAUTION Indicates apotentially hazardous situation which mayresult

in minor or moderate i吋ury and/or prope吋ydamage，if you

donot follow the instructions.

Hazard alert shapesandsymbols

Following shapes and symbols are used in the safety precaution labels affixed to the

products and in other places including operation manualsfor giving safety instructions.

•Filled circle means "Mandatory Action" or "Do as indicated."

Required action is shown in the circle or described nearthe circle.

③ Circle band with adiagonal slash means"Prohibition" or" You must not do."

Prohibited action is shown in the circle or described near the circle

ムTriangle means"Hazard Alerting" or "Be alert agaist hazard."

Thekind of hazard is shown in the triangle or described near the triangle.

A Exclamation point with atriangle is asafety alert symbol which indicates a

potential hazard. It is used with aSignal Word.

口Square or rectangle means"Information Messages" or "Notice."

Safety Precautions

1. Safety Precautions for Installation

WARNING

Grounding required:

Ground the transmission path at each segment with 100Ω or less ground resistance.

Grounding should be made at one point.

Otherwise，this can cause a transmission error or this can result in electric shock or fire.

Prohibit excessive voltage:

Do not apply voltages higher than the rated voltage (such as 100VAC) to connectors or terminal blocks or do

not mistake the polarity of voltages.

CAUTION

Choose proper environment for installation:

Avoid installing and storing the equipment in the following environments:

 Location with considerable dust

 Location in which flammable or corrosive gases (such as SO2 and H2S) are present

 Location where vibration or shock exceeds allowable limits

 Location where condensation may occur due to rapid change in temperature

 Location where the temperature is not within the specified range for installation

 Location where the humidity exceeds the specified limits for installation

 Location in the direct sunlight

 Location near a device that generates strong radio waves or magnetic fields

Considerations for maintenance and inspection:

Install the equipment in a place that facilitates maintenance and inspection. If not, in case of malfunctioning, it

may hinder the recovery of the system and result in serious accident.

Ensure proper ventilation:

Do not block vents, intake or exhaust openings of the equipment. Blocking them may cause mulfunctioning or

overheating which may result in fire.

Check specifications:

Follow the installation conditions written in this manual when mounting and wiring the system.

Otherwise，the original performance cannot be achieved，and it may cause the malfunction or system failure.

Turn off power before installing modules:

Turn off the power before installing modules. Otherwise，it may result in electric shock or module failure.

Emergency stop circuit and interlock circuit:

Construct the emergency stop circuit and interlock circuit outside the equipment.

Otherwise, it may cause an injury accident or damage to the machine if failure or malfunction occurs in the

equipment.

Safety Precautions

￨2. Safety Precau伽15 制n5pec伽1and Maintenance

AWARNING

Turn 0仔power:

Turn 0仔powerbefore attaching or detaching modules or before connecting devices. Failure to doso may

result in electric shock or equipment fault.

Makesure that poweris 0仔:

Alwayscheckand makesure that the external poweris turned off before installing or removing modules. Bare

metals appear onthe back of external terminal block ofthe module. Toavoid electric shock，take precautions

against touching them.

ACAUTION

Avoid shock:

00not drop，bumpor give strong shocks to the equipment or modulesto avoid fault. Shocks maycause

malfunction.

Oischarge static electricity:

Before handling equipment or modules，discharge static electricity from your bodybytouching ametal that is

grounded. Static electricity maycause equipmentto malfunction or fai l.

Useaconductive sheet or bagto avoid static:

Whencards and modules are taken out of base‑unit，they should beplaced on an electrically conductive

sheet (the bagthat comeswith spare module in it is madeof conductive sheet)，which is put on agrounded

work bench. Static electricity maydamageelectrical pa吋s.

Wipeoffdi同:

Wipeoff dirt and dust from equipment or modules，using asoft cloth. In casethe dirt is persistant，wetacloth

andwring it dry，then use it on the dirt. Oi吋on the pa吋smayresult in faulty actions and operations.

00 not use paint thinner for cleaning:

00not use benzene，paint thinner for cleaning equipment or modules. Thesechemicals will distort or discolor

panels and modules.

‑l

・l

Safety Precautions

13. Sa同Precau伽lS for Part R削acement

AWARNING

Ensureto stopfans:

Whenreplacing fan unit，make5ure to 5tOp the fan by 5witching off the fan unit at the distribution panel (or

circuit breaker)，before detaching the powercord. Failure to do50 mayresult in electric shock or injury dueto

the fan blades in motion.

￨4. SafetyPrecau伽sfor D拘Use

AWARNING

Checkspecifications:

Before using the equipment，makesure that the capacity，frequency，voltage and regulation of the power

supply meetthe specifications of the equipment. In casethey don't，the equipment maynot only work

adequately but maysuffer abreakdown or cause overheat that mayresult in fire.

Turn0仔powerin the eventofaproblem:

If the temperature in or around the equipment becomesabnormally high or an unusual fault occurs in the

equipment，stop using it and turn 0仔power，then contact your T05hiba representative. If left alone，overheat

mayresult in fire.

ACAUTION

00 nottouch co町、 ponents:

00not touch paはsinside the modulessuch as ICs，terminals，connectors andsoldered surface otherthan the

operation areas (setting switches inside the module).

ICs，LSls and others can beelectro statically damaged and can result in system failure. In addition，you may

get injured with the edges of lead wire of pa吋sor you'lI get burned if you touch heated pa吋s.

00 not disassemblethe equipment:

00not disassemble or modi柑the equipment or modules. Ooing so maylesson equipment safety or result in

equipment malfunction or failure.

Handlecords andcables properly:

00not force to pull ，twist or bend cords and cables of powersupply. Otherwise cables maybreak or become

hot.

Safety Precautions

Keepoff metals:

Donot insert metal 0同ects or drop paperclips or something through holes such asvent holes ofthe main unit.

This can result in fire or other malfunction of the system.

15. Safety Precau

伽可

sin Transpor刷on，Storage or Prod附Disposal

ACAUTION

Disposal of product:

Observe the regulations and rules of the local governments when disposing of the product.

Transportation andstorage of product:

Put the product in aconductive bag and then into apackagewhentranspo吋ing or storing the product.

Otherwise，this can result in malfunction of the product.

Safety Precautions

Application Restriction

• This product is not meantfor use in systemswhich include (note 1) equipmentthat directly affects

human life. Therefore it is not meantto be used for that purpose.

・If this product is to be used for systems including (note 2) equipment that is apa吋of people's

safety，and hasagreat affect onthe functional support of the public，please consult with our sales

counter，since (note 3) special consideration is needed concerning the system application，

maintenance，and control.

(Note 1) Equipmentthat directly a仔'ects humanlife includes the following:

• Medical instruments，such as life support equipment，and instruments used in an operating

room.

(Note 2) Systemswhich includes equipment that takes paはin people's safety，and has great

influence onfunctional support of public includes the following:

• Amain control system for anuc1 ear powerplant，asafety protection system for nuclear power

facilities，and other important system for safety pu中ose.

・Operation control system for mass transport剖ion and air traffic control system.

(Note 3) Special consideration meansto construct safe system (fool proof design，fail safe

design，atedious design) upon much discussion with our engineer.

Exemption Matters from Responsibility

• Weare not responsible for anydamagecaused byfire ，earthquakes，actions byathird pa吋y，

other accidents，anyintentional or unintentional misuse，or any use under abnormal conditions.

• Weare not responsible for anydamage(Ioss of business profit，interruption of business，or

change or loss of memorycontent) related to the use or inability to use this product.

• Weare not responsible for anydamagecaused dueto ignorance of the contents onthe handling

manual.

• Weare not responsible for anydamagecaused by misoperation whenthe purchaser combines

anapplication program created by the purchaser with anyof our programs.

• Weare not responsible for anydamageresulting from malfunction or other phenomenacaused

bycombination with aconnection device.

NOTE

Whenyou use mobile phonesor the like ，use it at alocation at least 1maway什omthe main unit :

of this productwhile in operation，various transmission cables，1/ 0cables andsoon. Radiowave :

interference can cause anincorrect operation of the system. :

‑・ーーーーーーーーーーーーーー句何回‑‑‑‑ーーーーーーーーーー回目陶ー目‑‑‑ーーーーーーーーーーーー‑‑ーーーーーーーーーーーーー句ーーーーーーーーーーーーーー

ω-

‑‑ーーーーーーーーーーーーーーー‑"

Please keep this manual carefully after reading.

Chapter7 Maintenance and Inspection

This chapter explains details and methods of daily inspection and periodical inspection and

maintenance parts.

Other manuals for V Series

This manual suits for next models

Table of contents

Other Toshiba Controllers manuals

Toshiba

Toshiba TSL3000 User manual

Toshiba

Toshiba Vm Series User manual

Toshiba

Toshiba 2000 User manual

Toshiba

Toshiba TE2 Series User manual

Toshiba

Toshiba V Series User manual

Toshiba

Toshiba BMS-CT1280UL User manual

Toshiba

Toshiba BMS-IFBN1281U-E User manual

Toshiba

Toshiba VF010H05 User manual

Toshiba

Toshiba nv Series User manual

Toshiba

Toshiba nv Series User manual

Toshiba

Toshiba CONNECT User manual

Toshiba

Toshiba RBC-MTSC1 User manual

Toshiba

Toshiba JK Series User manual

Toshiba

Toshiba TSL3000E User manual

Toshiba

Toshiba GX9 ASD User manual

Toshiba

Toshiba V Series User manual

Toshiba

Toshiba GX9 User manual

Toshiba

Toshiba TMC7 Series User manual

Toshiba

Toshiba S2E21 User manual

Toshiba

Toshiba BMS-IFBN1281U-UL User manual

Toshiba

Toshiba RBC-AIP2 User manual

Toshiba

Toshiba JK 720 User manual

Toshiba

Toshiba RBC-AWSU52-E User manual

Toshiba

Toshiba V Series User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual