Toshiba V Series User manual

6F8C1135

 

      

Important Information

No patent liability is assumed by TOSHIBACorporation with respect to use of information, illustrations,

circuits, equipment or examples of application in this publication.

TOSHIBA Corporation reserves the right to make changes and improvements to this publication and/or

related products at any time without notice. No obligation shall be incurred other than as noted in this

publication.

This publication is copyrighted and contains proprietary material. No part of this manual may be reproduced,

stored in a retrieval system, or transmitted, in any form or by any means . electrical, mechanical,

photocopying, recording, or otherwise . without obtaining prior written permission from TOSHIBA

Corporation.

PROSEC, TOSLINE and TOSDIC are trademarks or registered trademarks of TOSHIBACorporation.

IBM is a registered trademark of International Business Machines Corporation.

Microsoft, MS-DOS, Windows and Windows NT are registered trademarks of Microsoft Corporation in the

U.S.A. and other countries.

6F8C1135 i

Safety Precautions

This manual contains important information for the operator to operate this product safely and correctly

and avoid bodily injury and property damage.

Grasp the meanings of the following marks and their descriptions before reading this manual.

Hazard Classifications

WARNING

Indicates a potentially hazardous situation which, if not avoided, could

result in serious injury or death.

CAUTION

Indicates a potentially hazardous situation which, if not a avoided, can

result in minor or moderate injury, or property damage. It can also be

used to alert against unsafe practices.

Note: 1. Serious injury means loss of sight, injury, burns (high temperature, low temperature), electrical

shock, fracture, or intoxication which leaves aftereffects or requires hospitalization or need to go

to the hospital for a long time.

2. Injury means hurt, burn, or electrical shock which does not require hospitalization or going to the

hospital for a long time.

3. Property damage means extended breakdown of assets and materials.

Notation of Markings

Prohibited

Indicates a "may not" mark.

The concrete forbiddance is indicated with a pictograph or wording.

Mandatory

Indicate a mandatory action that you should never fail to do.

The concrete content is indicated inside or near the circle with a

pictograph or wording.

Caution

Indicates a caution.

The concrete content is indicated inside or near the triangle.

Note: The description of forbiddance, mandatory, and caution marks are subject to change, depending on

the labels on the main unit.

ii Model 1000 Loop Controller L1 LC511, 512 User′s Manual

1. Checking the Warning Labels on the Main Unit

Make sure warning markings are attached on the main unit.

If any of them are missing or the wording is illegible, contact Toshiba's Service Department.

2. Precautions on Installation

Be sure to ground the equipment.

Operation without grounding may cause accidental

fire or shock.

Avoid the following locations when installing or

storaging the equipment.

•Locations where there is dust, salinity, or ion

particles

•Locations where there are corrosive gases (SO2,

H2S) or flammable gases

•Locations where vibration or shock occurs beyond

the allowance

•Locations where there is condensation due to

sharp temperature variations

•Locations where the ambient temperature exceeds

the allowance range

•Locations where the relative humidity exceeds the

allowance range

•Locations where the equipment is exposed to direct

sunlight

•Locations where strong electric radiation or

magnetic field is generated

Improper the installation or writing of the system can

cause not only insufficient performance but also

malfunction and failure of the equipment

Install the equipment at a place where maintenance

and inspection are easy to do.

Otherwise, recovery from failure may take much

more time, leading to a serious accidents.

Do not cover the hole of the equipment, and the

ventilator/air inlet of the system.

Otherwise, overheating, etc. can cause fire or

malfunction.

6F8C1135 iii

Safety Precautions on Maintenance and inspection

Turn off power when you remove or insert modules

or boards, or connect any device.

Otherwise, it can cause electrical shock, or cause

damage to the equipment.

Make sure that the external power is turned off when

you remove or insert modules after wiring is

completed. However, LP03 and LP04 can be

excluded.

When you remove or insert LP03/LP04 while power

is applied, do not touch the terminal block.

Do not allow the equipment or boards to fall off, hit

against something hard or do not give strong shock

to them.

Any of these acts can cause damage to the

equipment.

Touch a grounded metal part to discharge the static

electricity on your body before touching the

equipment or boards.

Otherwise, charged static electricity on your body

can cause malfunction or failure.

Use soft cloth to clean the equipment, modules or

boards.

If it is really dirty, wife off dirt using cloth dipped in

water and squeezed out.

Leaving them dirty can cause erroneous judgment or

erroneous operation.

Place any modules or boards removed from the unit

or the basic unit on a conductive mat or conductive

bag (used to contain a spare board, etc.) on an

grounded desk.

Otherwise, static electricity can damage components

of the modules or the boards.

Do not apply benzene and thinner when cleaning the

equipment, modules or boards.

Otherwise, it can cause deformation or discoloration

of the equipment panel, modules or boards.

iv Model 1000 Loop Controller L1 LC511, 512 User′s Manual

4. Precautions During Parts Replacement

Turn off power of the equipment before replacing the

power fuse or warning fuse.

Otherwise, it can cause electrical shock or fire.

5. Precautions During Daily Use

Check whether power supply capacity, frequency,

voltage and voltage fluctuation conform to the

specification of the equipment before using the

power supply.

If nonconforming power supply is used, performance

of the equipment cannot be obtained and this can

damage the equipment and can cause fire from

overheat.

Do not disassemble or modify the modules or

boards. This will lose the equipment’s safety and can

cause erroneous operation or failure.

For repair of the unit, contact your Toshiba

representative.

Turn off power immediately if the ambient

temperature or internal temperature exceeds beyond

normal range or if failure is occurred in the

equipment.

Contact Toshiba for repairing.

Operation under such situation can cause fire or

electrical shock.

A bypass unit cannot be used with this device.

If it is necessary to hold the valve steady while

devices are replaced at the time of device failure in

your system, provide necessary measures in your

system to hold the valve.

6F8C1135 v

Do not touch components such as the parts,

terminals, connectors and soldered surfaces inside

the module or on the boards.

Touching any of these components can damage IC,

LSI or other parts by static electricity resulting in

malfunction. In addition, the edges on the end of the

part lead wires can cause injury and heated parts

can cause burns.

Do not touch switches or connectors which are not

part of the operation area.

Do not forcibly bend or pull or distort the power cord

and other cables. Otherwise, they can be cut off or

cause overheat.

If parameters or an application program is changed,

write data to flash ROM in the LC511,512 from the

Tool.

RAM memory backup will be memorized for 6

months.

Do not insert or drop metallic objects or clips into the

equipment through any opening in the equipment.

This can cause fire or accidents.

6. Safety Precautions on Disposal

Do not throw lithium batteries into fire.

Otherwise, they can explode.

6Model 1000 Loop Controller L1 LC511, 512 User′s Manual

Observe the rules and regulations of the local

government for disposal of lithium batteries and

Ni-Cd batteries.

When you dispose of the product (base unit and/or

modules), separate them from other common

materials and treat them as industry water materials.

Following information is only for EU-member states:

The use of the symbol

indicates that this product may

not be treated as household

waste. By ensuring this

product is disposed of

correctly, you will help prevent

potential negative

consequences for the

environment and human

health, which could otherwise

be caused by inappropriate

waste handling of this product. For more detailed

information about the take-back and recycling of this

product, please contact your supplier where you

purchased the product.

7. Precautions During Transportation and Storage

Observe the care mark indicated on the packaged

box during transportation and storage.

Modules may be damaged if the care mark is not

observed.

Do not give shock to the product during

transportation and storage.

Products are stored in a conductive mat and then

packaged.

6F8C1135 vii

Limitation of Applications

The equipment has been designed and manufactured for use in an industrial environment.

However, the equipment is not intended to be used for systems which can endanger human life

(Note 1).

Consult Toshiba if you intend to use the equipment for a special application which involves human life and

has great influence on the maintenance of the public function (Note 2). This is why such application

requires special care on the operation, maintenance, and control of the system (Note 3).

(Note 1) The systems which can endanger human life are life maintenance systems, equipment installed

in the surgery, and other medical equipment.

(Note 2) The systems which involve human life and have great influence on the maintenance of the public

function mean the main control system of a nuclear power plant, safety and protection system of

a nuclear power facility, transport operation and control systems for mass transportation, control

systems of aviation and space systems, and other systems and subsystems where safety is

critical.

(Note 3) "Special care" means to build a safety system (foolproof design, fail safe design, redundancy

design, etc.) in full consultation with Toshiba's engineers.

Immunity

Toshiba is not liable for any loss caused by fire, earthquake, action by a third party, or other accidents, or

the operator's intentional or accidental misuse, incorrect use, or use under abnormal condition.

Toshiba is not liable for any incidental loss caused by the use or non-use of this product, such as loss of

business profits, suspension of business, or loss or change of data on memory.

Toshiba is not liable for the loss caused by an operation contradictory to any of the instructions stated in

this manual.

Toshiba is not liable for the loss caused by an incorrect operation in combination with other equipment.

Toshiba is not liable for the loss caused by a malfunction in combination with an application program made

by the customer.

NOTE:

Use cellular phones and PHSs at least one meter away from the working equipment, transmission

cables, and I/O bus cable. Otherwise, the system can malfunction.

viii Model 1000 Loop Controller L1 LC511, 512 User′s Manual

Precautions for System Application

Caution

•System Redundancy

The product is manufactured to the best possible quality, but is yet subject to failure due to

accidental failure of electronic parts, for example. If your system requires a specially high degree of

reliability, it is recommended that you provide such a system with product redundancy, or with other

means of backup.

•Control output

Inappropriate program or parameter values set with the Tool could adversely affect controller output

stability and system performance. Check for controller output stability with a simulation program, for

example, in advance to verify that there will be no problem with connecting the product to your

system.

•Interlock design

If there is a possibility of serious effect on the system control in case an erroneous operation

occurs, adequate safety system such as an interlock design for external system must be

considered.

Other manuals for V Series

This manual suits for next models

Table of contents

Other Toshiba Controllers manuals

Toshiba

Toshiba V Series User manual

Toshiba

Toshiba TS1000 Installation and operation manual

Toshiba

Toshiba EX100 User manual

Toshiba

Toshiba TS3000 Series User manual

Toshiba

Toshiba V Series User manual

Toshiba

Toshiba 40 Plus User manual

Toshiba

Toshiba JK400 Series User manual

Toshiba

Toshiba OIS PLUS Series User manual

Toshiba

Toshiba V Series User manual

Toshiba

Toshiba 2000 User manual

Toshiba

Toshiba V Series User manual

Toshiba

Toshiba TCB-TSC640-PY User manual

Toshiba

Toshiba GX9 ASD User manual

Toshiba

Toshiba Network Device OIS120 User manual

Toshiba

Toshiba RBC-AIP2 User manual

Toshiba

Toshiba BMS-CT2560U-E User manual

Toshiba

Toshiba BMS-CT2560U-E Service manual

Toshiba

Toshiba CONNECT User manual

Toshiba

Toshiba RBC-AWSU52-E User manual

Toshiba

Toshiba TCB-IFCB-4E2 User manual

Toshiba

Toshiba VF010H05 User manual

Toshiba

Toshiba TD Series User manual

Toshiba

Toshiba nv Series User manual

Toshiba

Toshiba TE2 Series User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual