Superior MAGVIBE PRO User manual
MVP-300_20210713_REV_A
MVP 300 User Manual
P/n: D-17836
MVP-300_20210713_REV_A
General
Safety symbols:
WARNING! If used incorrectly the machine can cause injury.
Please read the Operator’s Manual thoroughly making sure you understand how to use
the machine before use.
Always wear personal protective equipment (PPE) such as gloves, eye protection, hearing
protection, and a hard hat. Jobsites might require certain protective equipment be used
due to national and local regulations and insurance policies. Make sure you check with
the jobsite foreman for requirements before work begins.
Dear Customer,
Thank you for choosing a Isoplam srl product. It is our intent to deliver the best
products possible. Delivering innovative, well-built, ergonomic, efficient products is our
goal to help you do the best job possible. Safety, and innovation are our cornerstone of
design.
This Operator’s Manual is a valuable document. Print it and make sure it is always
accessible when using the machine. If you lend or sell this machine, make sure that this
document is also transferred, so the new user will know how to properly use and
maintain it. It is available for download at: www.superiorinnovationsinc.com\manuals
User Responsibility
It is the owner’s / employer’s responsibility to ensure that the operator is properly
trained and has sufficient knowledge about how to use this machine safely. Supervisors
and operators must read and understand the operators Manual. They must be aware of
the safety instructions, limitations, proper use and maintenance. Local and national
legislation may regulate the use of this machine. Find out what legislations are applicable
in your location before use.
MVP-300_20210713_REV_A
Isoplam srl Reservation
All of the information and data in this Operator’s Manual was up to date at the time the
Operator’s Manual was sent to print. Isoplam srl research and development is
continually working on product development and improvements. Therefore, we
reserve the right to modify the design, appearance and features of the product without
prior notice. The most current version of manuals can be found at:
www.superiorinnovationsinc.com\manuals
Vibration Warning
WARNING! Overexposure to vibration can lead to circulatory damage and or nerve
damage, especially in people who have impaired circulation. Contact your doctor if you
experience symptoms of overexposure to vibration. Symptoms include: numbness, loss
of feeling, tingling, pricking, pain, loss of strength, and changes in skin color and
condition. These conditions normally occur in the fingers, hands or wrists and can be
further increased in cold temperatures.
Transportation and Storage
After work is completed, remove the MagVibe™ Pro and or ProTilt©from the float and
thoroughly wipe down before the concrete has time to setup. DO NOT USE A PRESSURE
WASHER OR SUBMERGE IN WATER! There are sensitive electronics and not all areas can
be water tight.
Secure the equipment during transportation to avoid transport damage and accidents.
Store in a lockable area so that it is not able to be accessed by children or unauthorized
persons.
Due to the lithium ion battery, the temperature cannot exceed 140°F (60°C).
Personal Protective Equipment (PPE)
You must use approved personal protective equipment (PPE) whenever you use the
machine. Personal protective equipment cannot eliminate injury, but it will reduce the
degree of injury if an accident does happen. Ask your dealer for help in choosing the
right protective equipment.
Common Sense
It is not possible to cover every conceivable situation. Exercise care and use common
sense if you get into a situation where you feel unsafe. Stop and seek expert advice
by contacting Isoplam srl, Inc., a service dealer or an experienced user. Do not
attempt any task that you are unsure of.
MVP-300_20210713_REV_A
Work Area Safety
Observe your surroundings to ensure nothing can affect your control of the machine.
Observe your surroundings to ensure there is no risk of people or animals that can come
into contact with the machine while in operation.
Do not use machine in bad weather, such as heavy rain, strong winds, intense cold, or
heavy fog. Working in such weather is trying and can lead to difficult situations.
Ensure that the work area is sufficiently illuminated to create a safe working
environment.
Make sure that there are no electrical cables routed in the working area.
Make sure that the work area is clear, clean and free of obstacles that can cause trips or
spills.
Before Starting
Inspect equipment to ensure that there are no loose fasteners, cracks, leaks, or other
obvious damage. If there are do not use until the problems are corrected.
Make sure that daily maintenance has been completed.
Make sure that the MagVibe™ Pro battery is fully charged.
In the Box
(Optional)
(Optional)
MVP-300_20210713_REV_A
Warranty
New equipment sold by Isoplam srl is warranted to be free from manufacturing defects
under normal service for a period of one (1) year from date of purchase by the original
consumer. Component manufacturers offer separate warranties and are covered
separately. These components are the lithium polymer battery, the electric motor, RF
remote control batteries (27A) and the battery indicator. These components carry a 180-
day warranty from the original date of purchase. For complete information or to request
a return goods authorization number (RGA#) call technical service at (844) 624-8423.
Superior Innovation’s obligation under this warranty is expressly limited to the
replacement or repair at our service facility or one that has been pre-authorized by
Isoplam srl.
This warranty does not apply to defects caused by damage, unreasonable use, faulty
repairs made by others or defects caused by failure to provide reasonable maintenance,
while in the possession of the consumer. Further, the warranty is void if the product, or
any of its components, is altered or modified by the consumer or if the product is used in
an inappropriate manner not recommended by the manufacturer.
The main case of the MagVibe™ is protected from opening by tamperproof fasteners
and has a void if opened decal to ensure the case is not opened. If the void warranty
decal is torn, removed, or damaged the warranty will be void.
In addition, a color changing water infiltration decal is located inside the MagVibe™ pro
main case. If the decal changes from white to red, the warranty will also be void. This is
due to use of a pressure washer or submersion in water.
MVP-300_20210713_REV_A
Description / Features / Controls
MVP-300_20210713_REV_A
Description / Features / Controls
MVP-300_20210713_REV_A
QAS™is a quick attach system designed to make it quick and easy to attach a MagVibe™Pro, ProTilt©, or
accessories to a ProFloat™©, other Superior tools and even other manufacturers floats. The ability to
quickly Remove the pivot allows for stacking of floats for transportation, easier cleanup and the ability to
switch floats or other tools very fast. The MagVibe™Pro, ProTilt©and ProFloat™©have a built-in QAS™
mounts. For other types of floats there are a variety of QAS™adapters: The QAS™-M is a four-bolt
adapter, the QAS™-W is a t-washer adapter for channel mount floats. There is also a QAS™-F adapter
that converts a standard four-bolt pivot to have a quick attach system so you can attach to a ProFloat™©.
MagVibe™ MVP 300 attachment to a ProTilt
Make sure QAS knobs
are loosened and the
shaft is all of the way
up.
Slide ProTilt onto the
QAS male mount
located on the top of
the MagVibe™ MVP
300.
QAS™-M Adapter
QAS™-F Adapter
QAS™-W Adapter
MVP-300_20210713_REV_A
Align the center of the ProTilt with the center mark
on the MagVibe™ as shown. This will help align the
QAS knob shafts with the MagVibe™ shaft extensions.
Slightly tighten the QAS knobs to where the QAS shaft
engages with the MagVibe™ shaft extensions.
Now you are ready to slide the system onto the
ProFloat™ or other tools.
To permanently attach your ProTilt to the
MagVibe™ you can now tighten the two M6 set
screws up against the ProTilt base using a 3mm
Allen key.
MVP-300_20210713_REV_A
ProFloat™© Attachment
Decide which direction you want to
mount the ProFloat™. We recommend
that the cutting edge be facing the
operator when cutting high spots and
filling low spots. Once this is done the
ProFloat™ can be quickly rotated 180° to
open the concrete on the way out, and
seal on the way back.
Loosen both QAS™knobs by turning
them counter-clockwise.
Align the QAS™ receptacle with the QAS™ dovetail and slide over to engage.
Center the MagVibe Pro™ over the
QAS™dovetail and tighten both
QAS™ knobs by turning them
clockwise. DO NOT OVERTIGHTEN.
Opens Concrete
Seals Concrete
Other manuals for MAGVIBE PRO
1
This manual suits for next models
1
Table of contents
Other Superior Tools manuals
