Strong SRT-4950H User manual
1
1
Warranty Information
This product carries the manufacturer’s warranty
against defects in workmanship for a period of 12
months from the date of purchase.
A faulty unit may be replaced within 30 days from date
of purchase.
Within that period, the faulty unit must be returned with
all original accessories to either the place of purchase
or STRONG Australia, along with the original purchase
receipt.
Beyond the 30-day period, a faulty unit must be
returned to STRONG Australia for evaluation. If
deemed faulty, it will be repaired or replaced (at the
discretion of STRONG Australia Pty Ltd.) and returned
to its owner.
A faulty product may be sent for evaluation either
directly to STRONG Australia, or via the place of
purchase.
STRONG Australia will cover the costs incurred for
returning for evaluation a faulty product, when the
product is deemed truly faulty. In case the product is
found to have no fault, the costs incurred in delivering
product to and from STRONG Australia will be borne by
the customer.
STRONG products carry the guarantees that cannot be
2
excluded under the Australian Consumer Law. You are
entitled to a replacement or refund in the event of a
major failure, and for compensation for any other
reasonably foreseeable loss or damage resulting from
such failure. You are also entitled to have the goods
repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a
major failure.
STRONG Australia PTY LTD.
60 WEDGEWOOD ROAD, HALLAM, VICTORIA 3803
PHONE: +61 3 8795 7990 - FAX: +61 3 8795 7991
3
Safety Precaution……………………………………………………...3
1. Reference .................................................................................... 6
1.1 General Features .................................................................... 6
1.2 Accessories ............................................................................. 6
2. Product Overview ....................................................................... 7
2.1Front Panel............................................................................... 7
2.2 Rear Panel .............................................................................. 7
2.3 Remote Control Unit (RCU) .................................................... 8
3. Installation................................................................................... 9
3.1 Powering On ......................................................................... 10
3.2 Antenna Setting for Satellite.................................................. 10
3.3 Search Channels from Satellite............................................. 10
3.4 Antenna Setting for Motor ..................................................... 11
3.5 Factory Default...................................................................... 12
4 . Basic Operation ....................................................................... 12
4.1 Audio ..................................................................................... 12
4.2 Zoom In ................................................................................. 13
4.3 Satellite List........................................................................... 13
4.4 EPG....................................................................................... 13
4.5 Subtitle .................................................................................. 14
4.6 Teletext.................................................................................. 14
4.7 Timer ..................................................................................... 15
4.8 Sleep ..................................................................................... 15
4.9 Multi Pictures......................................................................... 16
4.10 Program Information ........................................................... 16
5 . Channel Manager..................................................................... 17
5.1 Edit Channels........................................................................ 17
4
5.2 Edit Favorite .......................................................................... 17
5.3 Sort Channels ....................................................................... 17
5.4 Delete Satellite channels....................................................... 17
5.5 User Channel List.................................................................. 17
6 . Channel List ............................................................................. 18
6.1 OK List .................................................................................. 18
6.2 Favorite List........................................................................... 18
7 . Preferences .............................................................................. 19
7.1 System Setting ...................................................................... 19
7.2 OSD Setting .......................................................................... 20
7.3 Timer Setup........................................................................... 20
7.4 Parental Control .................................................................... 21
7.5 USALS Setup ........................................................................ 21
8. USB Control .............................................................................. 21
8.1 Play Files............................................................................... 21
8.2 Recording and Timeshift ....................................................... 23
8.3 Other Operations................................................................... 24
9. Network...................................................................................... 25
9.1 Connecting to the Wi-Fi......................................................... 25
9.2 Network Application............................................................... 26
10. Additional Information ........................................................... 27
10.1 Trouble Shooting................................................................. 27
10.2 Technical Specification ........................................................ 29
10.3 Glossary .............................................................................. 30
5
Safety Precaution
This STB has been designed and manufactured to satisfy the international
safety standards. Please read the following safety precautions carefully before
operating this receiver.
Main Supply:
Before operating, please check the units operating voltage is 90~250V AC
50/60Hz.
Overload:
Do not overload a wall outlet, extension cord or adapter, neither use damaged
power cord or touch it with wet hand as this may result in electric shock.
Liquid:
The receiver shall not be exposed to dripping or splashing water, and that no
objects filled with liquids, such as vase, shall be placed on the apparatus.
Ventilation:
Keep the slots on top of the receiver uncovered to allow sufficient airflow to the
unit. Do not put the receiver on soft furnishings or carpets. Do not expose the
receiver to direct light or do not place it near a heater or in humid conditions. Do
not stack other electronic equipment on top of the receiver.
Cleaning:
Unplug the receiver from the wall outlet before cleaning. Clean the receiver by a
soft cloth or mild solution of washing-up liquid (no solvents).
Connection:
Disconnect the receiver from the mains when you connect it to satellite LNB or
disconnect it from LNB. Failure to do this could possibly cause damage to the
LNB.
Uncover:
Do not remove the cover, to reduce the risk of electric shock. Contact qualified
and licensed service personnel to repair the receiver, or contact your dealer.
0
6
1. Reference
1.1 General Features
DVB-S/DVB-S2 Satellite Compliant (MPEG-II/ MPEG-IV/ H.264)
SCPC & MCPC receivable from Ku and C band satellites
Universal, Single, Single S & C Band Wideband LNB
RF Modulator
DiSEqC1.0/1.1/1.2/1.3 (USALS)
Blind search supported
Auto DiSEqC Search
PAL/NTSC/SECAM Conversion
True full Color (32 bits) on screen display (OSD)
Storing memory: 100 satellite, 4000 transponders and 10000 channels
8 favorite group and parental lock supported
Multi-language menu supported
Multi-language audio supported
Multi-language DVB Subtitle output
7 days Electronic Program Guide (EPG)
Teletext output through VBI and OSD
Multi-Picture supported
USB 2.0 Interface
1.2 Accessories
Users manual/Remote Control Unit/Batteries/AV Cable/HDMI Cable/ Wi-Fi
Dongle
1
7
2. Product Overview
2.1FrontPanel
1. POWER: Switch between operation and STAND-BY modes.
2. VOL+/-: Change volume while watching program or change option from left to
right.
3. CH+/-: Change channels while watching program or change option from up to
down.
4. POWER LED: Power Indicator.
5. SIGNAL LED: Signal Indicator.
6. DISPLAY: It displays channel number. In STAND-BY mode it displays local
time.
7. USB: USB 2.0 port.
2.2 Rear Panel
1. LNB IN: Connect the satellite antenna cable.
2. HDMI: Connect to the TV using an HDMI cable.
3. AUDIO/ VIDEO: Connect to the TV using an RCA cable.
8
4. SPDIF: Digital Audio output (Coaxial).
5. RF OUT: Connect to TV set using modulator.
6. TV ANT IN: Connect to TV antenna.
7. RS232C: Connect to the computer using serial line.
8. USB2.0: One USB 2.0 Host Port Front. One USB Port Rear for Wi-Fi Dongle
9. ON/OFF: Power on/off.
2.3 Remote Control Unit (RCU)
You can control this receiver by this remote controller
with full function.
1.POWER: Switch between operation and low power
modes.
2.STAND-BY: Switch between operation and standby
modes
3.TEXT: Display the Teletext.
4.SUBTITLE: Display the subtitle language list.
5.AUDIO: Display audio track list.
6.MUTE: Mute audio.
7.NUMERIC KEY (0~9): Enter a TV/radio channel
number, menu option number.
8.TV/RAD: Switch between TV and RADIO.
9.SLEEP: enter the sleep timer menu.
10.EPG: Display the program guide.
11.INFO: Display the program information.
12.RECALL: Show the previous viewed channels list.
Or switch to the previous viewed channel.
13.SAT: Show the scanned satellite list.
14.MENU: Activate main menu or exit to live
channel.
15.EXIT: Exit current menu step by step.
16.VOL+/VOL-: Change volume.
9
17.CH+/CH-: Change program.
18.OK: Confirm the selected operation or display the channel list while watching
a program.
19.PVR List: Enter the PVR folder.
20.FAV: Display favorite channel list.
21.Page / : Page up/down on menu.
22.REW: Fast rewind.
23.TIME SHIFT: Time shift.
24.: Play
25.FWD: Fast forward.
26.REC: Record.
27.STOP: Stop USB DVR function.
28. I: Previous.
29. I: Next.
30.MULTIPC: Display multi-picture menu mode list.
31.FREEZE: Freeze the picture.
32.ZOOM: Picture zooming function.
33.WWW: enter into network application.
34.F1: Accessory function.
35.F2: Switch 4:3 & 16:9 Screen Formats.
36.F3: Setup event timer.
37.F4: Setting network type.
3. Installation
Installation Procedure.
Tip: The default password is 0000. If you have forgotten your password, please
contact your local product distributor.
Table of contents
Other Strong Receiver manuals
Strong
Strong SRT 6010 User manual
Strong
Strong SRT 5016 User manual
Strong
Strong SRT 60 User manual
Strong
Strong SRT 6505 User manual
Strong
Strong SRT 7010 User manual
Strong
Strong SRT 8210 User manual
Strong
Strong SRT 6352 CI User manual
Strong
Strong SRT 2402 User manual
Strong
Strong SRT 7335 CI User manual
Strong
Strong SRT 6200 User manual
Strong
Strong SRT 4651X User manual
Strong
Strong SRT 7007 User manual
Strong
Strong SRT 3000 User manual
Strong
Strong SRT 5004 User manual
Strong
Strong SRT 6350 CI User manual
Strong
Strong 9120072370595 User manual
Strong
Strong SRT 3000 User manual
Strong
Strong SRT 8112 User manual
Strong
Strong SRT 5125 User manual
Strong
Strong SRT 5390 User manual
