StarTech.com SVID2USB232 User manual

Manual Revision: 02/19/2020

User Manual

For the latest information and specications visit

www.startech.com/SVID2USB232

USB Video Capture Cable - S-Video or

Composite

Actual product may vary from photos

SKU#: SVID2USB232

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Compliance Statements

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment o and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

• Reorientorrelocatethereceivingantenna

• Increasetheseparationbetweentheequipmentandreceiver

• Connecttheequipmentintoanoutletonacircuitdi󱐯erentfromthatto

whichthereceiverisconnected

• Consultthedealeroranexperiencedradio/TVtechnicianforhelp

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du

Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other

Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and

other protected names and/or symbols of third-party companies not related in

any way to StarTech.com. Where they occur these references are for illustrative

purposes only and do not represent an endorsement of a product or service

by StarTech.com, or an endorsement of the product(s) to which this manual

applies by the third-party company in question. Regardless of any direct

acknowledgement elsewhere in the body of this document, StarTech.com

hereby acknowledges that all trademarks, registered trademarks, service marks,

and other protected names and/or symbols contained in this manual and

related documents are the property of their respective holders.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Safety Statements

Safety Measures

• Wiringterminationsshouldnotbemadewiththeproductand/or

electriclinesunderpower.

• Cables(includingpowerandchargingcables)shouldbeplacedand

routedtoavoidcreatingelectric,trippingorsafetyhazards.

Mesures de sécurité

• Lesterminaisonsdecâblâgenedoiventpasêtree󱐯ectuéeslorsquele

produitet/oulescâblesélectriquessontsoustension.

• Lescâbles(ycomprislescâblesd’alimentationetdechargement)

doiventêtreplacésetacheminésdefaçonàévitertoutrisque

électrique,dechuteoudesécurité

安全対策

• 電源が入っている状態の製品または電線の終端処理を行わないでくださ

い。

• ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引き回し

を行い、電気障害やつまづきの危険性など、安全上のリスクを回避するよう

にしてください。

Misure di sicurezza

• Iterminialideilielettricinondevonoessererealizzateconilprodotto

e/olelineeelettrichesottotensione.

• Icavi(inclusiicavidialimentazioneediricarica)devonoessere

posizionatiestesiinmododaevitarepericolidiinciampo,rischidi

scosseelettricheopericoliperlasicurezza.

Säkerhetsåtgärder

• Monteringavkabelavslutningarfårintegörasnärproduktenoch/eller

elledningarnaärströmförda.

• Kablar(inklusiveelkablarochladdningskablar)skadrasochplaceraspå

såsättattriskförsnubblingsolyckorochandraolyckorkanundvikas.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Table of Contents

Compliance Statements........................................................................1

Safety Statements..................................................................................2

Product Diagram ....................................................................................4

Product Information ..............................................................................5

Packaging Contents ................................................................................................................................. 5

Requirements ............................................................................................................................................. 5

Hardware Installation............................................................................5

Software Installation .............................................................................6

Driver Installation...................................................................................................................................... 6

Video Capture Software Installation (Optional)............................................................................. 7

Installing the Twain Driver....................................................................8

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Product Diagram

1USB-A Connector (Host)

2S-Video Connector (Input)

3RCA Connector (Input)

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Product Information

Packaging Contents

• USB Video Capture Cable x 1

• Software CD w/ Activation Key x 1

• Driver CD x 1

• User Manual x 1

Requirements

• Host Computer with available USB-A port

• Windows® 7, 8.1, and 10

• Analog Video Source with S-Video or Composite Cabling

(DVD, DVR, etc.)

Hardware Installation

1. Connect the USB-A Connector (Host) to an available USB-A

port on the Host Computer system.

2. Connect an Analog Video Source Device (e.g. DVD, DVR

etc.) to the Composite or S-Video Connectors on the Video

Capture Cable.

Note: After you connect the physical hardware to the Host

Computer, it is likely that you may receive prompts for

installation. Please close these specic prompts as these steps

will be performed during software installation.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Software Installation

Driver Installation

1. After completing the hardware installation, the Found New

Hardware Wizard will open. Click the Cancel button to

close the screen.

2. Download the latest drivers from the Support tab on the

website www.startech.com/SVID2USB232

3. Locate the Setup.exe le, it will be located in the Windows

directory in the downloaded folder.

4. If a Windows Security Dialog screen appears, click Run or

Install this driver software anyway to proceed.

5. The USB Video/Audio Device Windows Driver -

Installation Wizard will appear.

6. Click the Next button to begin the driver installation.

7. When the Windows Driver Installation is complete you will

receive a notication. Click the Finish button to complete

the driver installation.

8. Reboot the Computer.

9. Navigate to the Device Manager screen on the systems

Operating System (OS).

10. Expand Imaging Devices, you will see USB 2828x Video

imaging device listed.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Device Manager Screen

Video Capture Software Installation (Optional)

An Activation Key for the Video Capture Software comes with

the Software CD. You will need the Activation Key to access

the Video Capture Software.

Note: Keep the Video Capture Software Activation Key

in a safe place in case you need to reference it again in the

future.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

1. Insert the Software CD into a CD-ROM drive, the Setup

should launch automatically. If not, use Windows Explorer

to navigate to the appropriate CD-ROM drive and start the

Movavi Video Editor 11 SE Setup.

2. Follow the on-screen prompts until installation is complete.

3. When requested, enter the Activation Key that is printed on

the outside of the CD ROM case.

Note: The Video Capture Cable will work with any Win-

dows based video capture software. Please install the Twain

Driver (outlined below) if you do not intend to use the

included Video Capture Software.

Installing the Twain Driver

1. Download the latest drivers from the Support tab on the

website www.startech.com/SVID2USB232.

2. Click on the Twain Drivers folder.

3. Run the Setup.exe.

4. The Installation Wizard will appear.

5. Click the OK button to begin the installation. Follow the on-

screen prompts until installation is complete.

6. Reboot the Computer.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer

to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or

their ocers, directors, employees or agents) for any damages (whether direct

or indirect, special, punitive, incidental, consequential, or otherwise), loss of

prots, loss of business, or any pecuniary loss, arising out of or related to the use

of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or

consequential damages. If such laws apply, the limitations or exclusions

contained in this statement may not apply to you.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Table of contents

Other StarTech.com PCI Card manuals

StarTech.com

StarTech.com PEX1000MMSC User manual

StarTech.com

StarTech.com PEX1P User manual

StarTech.com

StarTech.com PEXMSATA3422 User manual

StarTech.com

StarTech.com 8STPEX1S953LP User manual

StarTech.com

StarTech.com PEX2PECP2 User manual

StarTech.com

StarTech.com PCI1S550 User manual

StarTech.com

StarTech.com PCI3UV22F User manual

StarTech.com

StarTech.com PEXESAT322I User manual

StarTech.com

StarTech.com PEX1PECP User manual

StarTech.com

StarTech.com PEX4S553S User manual

StarTech.com

StarTech.com PCI1394_2 User manual

StarTech.com

StarTech.com PEX2S5521P User manual

StarTech.com

StarTech.com PEXUSB311AC2 User manual

StarTech.com

StarTech.com USB32VGCAPRO User manual

StarTech.com

StarTech.com PEXUSB3S24 User manual

StarTech.com

StarTech.com PCI1394_2 User manual

StarTech.com

StarTech.com PEX1S553 User manual

StarTech.com

StarTech.com PEXUSB312A3 User manual

StarTech.com

StarTech.com PCICOMBO User manual

StarTech.com

StarTech.com PCI2USB User manual

StarTech.com

StarTech.com USB32HDCAPRO User manual

StarTech.com

StarTech.com PEX4M2E1 User manual

StarTech.com

StarTech.com PCI1S550 User manual

StarTech.com

StarTech.com PCI312PUSB/LP User manual

Popular PCI Card manuals by other brands

ERMA

ERMA SSI 1417 instruction manual

SIIG

SIIG CyberSerial Dual PCI Software installation

Moxa Technologies

Moxa Technologies CP-102E Quick installation guide

I-Bus

I-Bus IBC2602 user guide

Exsys

Exsys EX-60102 manual

Chelsio Communications

Chelsio Communications T5 Series Installation and user guide

Conrad Electronic

Conrad Electronic 97 46 71 operating instructions

Micro Innovations

Micro Innovations USB650A Quick installation guide

KTI Networks

KTI Networks KF-310 user guide

Asus

Asus SpaceLink WL230 user manual

SIIG

SIIG SC2475 Quick installation guide

TRENDnet

TRENDnet TEW-703PI Quick installation guide

Belkin

Belkin F5D7000F user manual

Pericom

Pericom PI7C7100 manual

ADLINK Technology

ADLINK Technology cPCI-3548 user manual

Digium

Digium TE200 Series user manual

Allo.com

Allo.com 2nd Gen E1/T1/J1 Quick installation guide

Western Digital

Western Digital FireWire PCI Adapter installation guide