StarTech.com PCICOMBO User manual

Installation Manual

PCICOMBO

Network Card

10 Mbps PCI Ethernet Card with Dual Interface

General Description

StarTech.com’s PCICOMBO PCI Network card comes with full support for duplex

modes and autoconfiguration through a workstation’s PCI BIOS, this PCI Card features

optional AUI connectors. Bus Mastered to greatly reduce system CPU load and sporting

a boot ROM socket for optional RPL boot ROM, this product is designed to provide

customers with an optional, dual interface for the Networking needs.

Features

• 32-bit PCI 2.0 Bus interface

• Plug and Play compatible with Windows 95, 98, ME, and Windows 2000

• Fully autoconfiguring through the computer's PCI BIOS

• Supports full duplex mode

• Low power consumption with sleep mode for energy saving PC's

• Optional AUI connector

• Bus Mastered to greatly reduce system CPU load

• Coax interface allows cable distances of up to 300m

• Boot ROM socket for optional RPL boot ROM

• Complies fully to IEEE 802.3 CSMA/CD Ethernet 10BaseT and 10Base2 Standards

• Two LED's indicate LINK and activity

• Drivers for all operating systems

Specifications

Standards IEEE 802.3 10BaseT, 10Base2, 10Base5

Data Transmission Rate

LEDs

Bus Type

IRQ

Boot ROM

Temperature

Dimensions

Certification

10Mbps or 20Mbps

UTP link status, Activity

PCI 2.0

Assigned by system

0 to 50 degrees C

140 x 63 mm

FCC part 15 class A, CE Mark

I/O Address

Getting Started

This section is designed to help you prepare the PCICOMBO card for installation. Please

read through this section carefully before attempting to install the card.

Unpacking the PCICOMBO card

This package should contain:

1 x PCICOMBO Network card

1 x BNCT connector

1 x driver disk

Installation

Network cards, like all computer equipment are subject to static electricity. Be sure that

you are properly grounded. StarTech.com recommends that you wear an anti-static strap

and that your system is unplugged before doing any work on the computer.

Card Installation

1. Turn off the computer and remove its cover.

2. Insert the card into a free PCI slot.

3. Connect to the network using AUI, thin or twisted-pair cable depending on the

connector you are using.

Card Configuration/ Diagnostic

Basically, the card is completely self-configurable, requiring no intervention from the

user. There are only 3 items that can be configured: Medium type, Full/Half duplex, and

Boot ROM enables. You can also run diagnostic of the card from the setup.exe program

provided with the PCICOMBO card.

Insert the disk provided, in DOS prompt, execute setup.exe command and you will see

the following:

• View Configuration

• Manual Setup Configuration

• Diagnostic

• Exit

Please follow the easy menu-driven program to configure the card.

Driver Installation

For detailed information, please refer to the document in the disk provided.

Examples:

1. For NetWare client, please execute the following:

lsl

pciodi

ipxodi

netx or vlm

2. For NetWare server, execute the following:

load pcisrv

bind ipx pxisrv

load monitor

Boot Rom Installation (Optional)

The PCICOMNO card provides a socket for a remote boot ROM. With a boot ROM, a

host computer can load the operating systems over the network.

1. Plug in the boot ROM to the appropriate position, make sure the direction is correct.

2. Enable the boot ROM function. Please see the Setup program for details.

AUI Bracket Installation (Optional)

You can buy another bracket containing an AUI connector from your dealer.

1. Hook up the cable to the connector pins market “AUI”. Make sure the red line on the

cable is positioned in the “pin 1” location.

2. Secure the bracket to the PC.

Troubleshooting

The most common factors that cause an adapter to fail are configuration conflicts and

cabling problems. PCI cards shouldn’t have any conflct problems due to Plug and Play

specifications. One should check the cable and its terminator. Also, use the adapter LED

indicators and diagnostic program. For information on the Diagnostic Program, please

see the Setup program. If the problem presists, call your dealer for help.

LED Indicators

The LEDs help you monitor the network status. Their functions depend on the type of

cable used.

*Link monitors the data link status on the UTP cable. It turns ON when there is data

linked, and OFF when there is a bad connection.

*Activity blinks when there is data transmission/reception.

Table of contents

Other StarTech.com PCI Card manuals

StarTech.com

StarTech.com PEX1394A2DV User manual

StarTech.com

StarTech.com PCI330USB2 User manual

StarTech.com

StarTech.com PEX8S950LP User manual

StarTech.com

StarTech.com PEX1S1PMINI User manual

StarTech.com

StarTech.com ST10GSPEXNB User manual

StarTech.com

StarTech.com PCI2S422ISO User manual

StarTech.com

StarTech.com PEXUSB3S4 System manual

StarTech.com

StarTech.com PCI2USB User manual

StarTech.com

StarTech.com PEXESAT322I User manual

StarTech.com

StarTech.com PCI1394_2 User manual

StarTech.com

StarTech.com PCISATA2A133 User manual

StarTech.com

StarTech.com PEX2S952PW User manual

StarTech.com

StarTech.com PEX2PECP2 User manual

StarTech.com

StarTech.com PCISCSIUW User manual

StarTech.com

StarTech.com PEX100S User manual

StarTech.com

StarTech.com PEX10GSFP4I User manual

StarTech.com

StarTech.com PEX2S1P552B User manual

StarTech.com

StarTech.com PCI1394_4 User manual

StarTech.com

StarTech.com PEX1000SFP2 User manual

StarTech.com

StarTech.com PCI2S485 User manual

StarTech.com

StarTech.com PCIPOST Manual

StarTech.com

StarTech.com PEXUSB3S42 User manual

StarTech.com

StarTech.com PCI4S550 User manual

StarTech.com

StarTech.com PEX1S1P952 User manual

Popular PCI Card manuals by other brands

ERMA

ERMA SSI 1417 instruction manual

SIIG

SIIG CyberSerial Dual PCI Software installation

Moxa Technologies

Moxa Technologies CP-102E Quick installation guide

I-Bus

I-Bus IBC2602 user guide

Exsys

Exsys EX-60102 manual

Chelsio Communications

Chelsio Communications T5 Series Installation and user guide

Conrad Electronic

Conrad Electronic 97 46 71 operating instructions

Micro Innovations

Micro Innovations USB650A Quick installation guide

KTI Networks

KTI Networks KF-310 user guide

Asus

Asus SpaceLink WL230 user manual

SIIG

SIIG SC2475 Quick installation guide

TRENDnet

TRENDnet TEW-703PI Quick installation guide

Belkin

Belkin F5D7000F user manual

Pericom

Pericom PI7C7100 manual

ADLINK Technology

ADLINK Technology cPCI-3548 user manual

Digium

Digium TE200 Series user manual

Allo.com

Allo.com 2nd Gen E1/T1/J1 Quick installation guide

Western Digital

Western Digital FireWire PCI Adapter installation guide