ST STLink User manual
STLink Upgrade User Guide
Installation Guide
STLink Upgrade User Guide
Introduction
The ST-LINK is an in-circuit debugger and programmer for the STM8 and STM32
microcontroller families.The SWIM and JTAG/SWD interface is used to communicate with the
STM8 or STM32 microcontroller located on your own application board.
On the PC side, the USB full speed interface is used to communicate with:
ST Visual Develop (STVD) and ST Visual Program (STVP) : these are the software from
STMicroelectronic's for the STM8,
ATOLLIC, IAR and KEIL: these are 3
rd
party softwares for the STM32 (to get information
or support on these IDEs please contact the 3
rd
party directly)
STLink Upgrade User Guide
2/4
STLink Upgrade User Guide
How to upgrade STLink
The 1
st
step is to upgrade STLink is to run the program ST-LinkUpgrade.exe provided
into the Package. You will see the following screen
Connect the STLink via USB to your computer only, no need to connect the STLink to a
target board. Then click on the “device connect” button.
If your debugger is properly connected on you PC, but you get the message, below, then
your device does not support firmware upgrade.
STLink Upgrade User Guide
3/4
STLink Upgrade User Guide
If your device supports firmware upgrade, the application will successfully connect to the
STLink. It will display the current firmware version of your device and the version to
download as shown below :
Then you just need to click “Yes >>>>” to start the upgrade process.
Once the update is completed you will see an “upgrade is successful” dialog box
STLink Upgrade User Guide
4/4
STLink Upgrade User Guide
When you click OK, the “ST-Link Upgrade” application will check the Firmware
version :
Table of contents
Other ST Motherboard manuals
ST
ST EVAL-L9177A User manual
ST
ST STEVAL-BTDP1 User manual
ST
ST ARMIC30 User manual
ST
ST EVAL-L9960 User manual
ST
ST EVAL-L99DZ200 User manual
ST
ST SPC563M64CAL144 User manual
ST
ST STM32F3DISCOVERY User manual
ST
ST P-NUCLEO-IOD01A1 User manual
ST
ST EVAL-L9963-MCU Installation and operating instructions
ST
ST SPC58XXADPT176S User manual
