SIIG US22 Series User manual

USB SwitchUSB Switch

USB Switch

Quick Installation GuideQuick Installation Guide

Quick Installation Guide

Introducing theIntroducing the

Introducing the

USB SwitchUSB Switch

USB Switch

TheUSBswitchisdesignedtoshareUSBdevice(s)between

multiple systems.

Features and BenefitsFeatures and Benefits

Features and Benefits

• Compliant with USB Specifications, Revision 1.1

• Active power/activity LED indicator

• Hotkey control between computers

• Hot-swapping feature allows you to attach/detach

USB devices without first powering down your

computer

• Low power consumption-powered from the system.

No power adapter required!

• Designed for USB devices including printers,

scanners, hard disk drives, cameras and Zip drives

Note: Not designed to work with mouse or

keyboard

System RequirementsSystem Requirements

System Requirements

• PC computer with an available USB port

• Windows 98/98SE/ME/2000/XP

04-0287B

Package ContentsPackage Contents

Package Contents

• (1) USB switch

• (2) USB cables (6 Ft, Type A to Type B)

• (1) Driver CD

• This quick installation guide

LayoutLayout

Layout

DonotconnecttheUSBSwitchtoyoursystemortoaUSB

device until after the driver has been installed. Please

refer to the Installation section on page 4 to install its

driver.

For USB Switch 2-to-1:

• Two Type B connectors for system connection

• One Type A connector for device connection

• Hotkey control between two computers

Figure 1. USB Switch 2-to-1 Layout

To PC

Power/Activity LED

(Type B connector)

To USB device

(Type A connector)

For USB Switch 4-to-1:

• Four Type B connectors for system connection

• One Type A connector for device connection

• Hotkey control up to four computers

Power/Activity LED

To PC

(Type B connector)

Figure 2. USB Switch 4-to-1 Layout

For USB Switch 4-to-2:

• Four Type B connectors for system connection

• Two Type A connectors for device connection

• Hotkey control up to four computers

To PC

(Type B connector)

To USB device

(Type A connector)

Power/Activity LED

To PC

(Type B connector)

To PC

(Type B connector)

To USB device

(Type A connector)

Figure 3. USB Switch 4-to-2 Layout

InstallationInstallation

Installation

Important: Throughout Windows driver installation,

youmaybepromptedtoinsertWindowsInstallationCD.

Some files on this CD are neccessary to complete driver

installation. PleaseinsertCDwhenpromptedandfollow

on-screen instructions.

Windows 98/98SE InstallationWindows 98/98SE Installation

Windows 98/98SE Installation

1. Insert the driver CD into the CD-ROM.

2. AutoRun should start the installation. If AutoRun

doesn't start, click Start, Run, Type D:\setup.exe,

then click OK. (Change D: to match your CD-ROM

drive).

3. Select the correct language and click OK.

4. Click Next, Next, then Finish.

5. Restart your system. After Windows boots, connect

the USB switch to your systems with the USB cables.

6. When Windows prompts for driver again, click

Next.

7. Select Search for the best driver..., and click Next.

8. Clear all check boxes, click Next, Next, then Finish.

Windows ME/2000/XP InstallationWindows ME/2000/XP Installation

Windows ME/2000/XP Installation

1. Insert the driver CD into the CD-ROM.

2. AutoRun should start the installation. If AutoRun

doesn't start, click Start, Run, type D:\setup.exe,

then click OK. (Change D: to match your CD-ROM

drive).

3. Select the correct language and click OK.

4. Click Next, Next, then Finish.

5. Restart your system. After Windows boots, connect

the USB switch to your systems with the USB cables

and the drivers will install automatically.

Connecting USB deviceConnecting USB device

Connecting USB device

When connecting your USB device(s) to the USB switch,

follow the USB device's installation procedures.

USB Sharing ApplicationUSB Sharing Application

USB Sharing Application

USB sharing application allows switching between your

systems. Use the convenient taskbar icon or keyboard

Hotkey to switch between systems.

Safely Remove Hardware Feature

ForMassStoragedevicessuchaszipdrives,USBreaders,

CD-ROMs, before switching the USB device to another

system, it must be released from the system that controls

it. FirstuseWindows'Safely RemoveHardware feature,

locatedinthetaskbar,toStoptheUSBdevicethenusethe

Status Indicator or Hotkey Control to switch the USB

device to another system.

Hotkey Control

After executing Windows' Safely Remove Hardware

feature, press Ctrl+F11 to switch the USB device to the

current system.

Status Indicator

1. The Status Indicator is located in the taskbar by the

system clock. The indicator has three functions:

Red:Anothersystemisaccessingthedevice-switching

not allowed.

Green: The current system controls the device.

Yellow: No system controls the device- switching is

allowed.

2. Double click the USB Sharing icon to start USB

sharing program manually.

3. Right click the Status Indicator and select Switch

can also switch USB access to the current system.

UK Warranty & Support InformationUK Warranty & Support Information

UK Warranty & Support Information

The5yearwarrantysuppliedwiththisproductisoffered

by SIIG, Inc. If you should happen to encounter any

problemswiththisproduct,pleasefollowtheprocedures

below.

1. If it is within the first year of purchase, please

return product to the outlet you purchased from.

2. If your product is between 2 and 5 years old from

date of purchase, please contact SIIG using the

contact details below.

For UK Technical SupportFor UK Technical Support

For UK Technical Support

Telephone: +44 (0) 1255 687503

Fax: +44 (0) 1255 687501

Email: [email protected]

Website: http://www.siig.uk.com

Technical SupportTechnical Support

Technical Support

QUESTIONS? SIIG’s Online SupportOnline Support

Online SupportOnline Support

Online Support has the answers!

Simply visit our web site at

www.siig.comwww.siig.com

www.siig.com

and click

SupportSupport

Support. Our online support database is updated daily

with new drivers and solutions. The answers to your

problems could be just a few clicks away.

USB Switch is a trademark of SIIG, Inc. All other names

used in this publication are for identification only and may be

trademarks of their respective companies.

PRODUCT NAME MODEL NUMBER

USB Switch US22xx

FCC RULES: TESTED TO COMPLY WITH FCC PART 15,

CLASS B OPERATING ENVIRONMENT: FOR HOME OR

OFFICE USE

FCC COMPLIANCE STATEMENT:

This device complies with part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) This device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause

undesired operation.

THE PARTY RESPONSIBLE FOR

PRODUCT COMPLIANCE

SIIG, Inc.

6078 Stewart Ave.

Fremont, CA 94538-3152

Table of contents

Other SIIG Switch manuals

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual