Siemens SIMATIC NET MOBIC T8 User manual
Safety Notices
MOBIC Java Virtual Machine 1
Operation as Terminal Client 2
Repairs 3
Language Variants 4
Protective Foil 5
Windows CE 3.0 6
Charge Contacts 7
Glasstouch 8
Power Supply RS-232 9
MOBIC T8
SIMATIC NET
Information on the Product
English
12/2003
A5E00263210
Release 01
The following supplement is part of this documentation:
No. Designation Drawing number Edition
1 Product information A5E00882110-01 08/2006
2MOBIC T8
A5E00263210
Classification of Safety-Related Notices
This manual contains notices which you should observe to ensure your own perso-
nal safety, as well as to protect the product and connected equipment. These noti-
ces are highlighted in the manual by a warning triangle and are marked as follows
according to the level of danger:
!Danger
indicates that death or severe personal injury will result if proper precautions are
not taken.
!Warning
indicates that death or severe personal injury can result if proper precautions are
not taken.
!Caution
with warning triangle indicates that minor personal injury can result if proper pre-
cautions are not taken.
Caution
without warning triangle indicates that damage to property can result if proper pre-
cautions are not taken.
Notice
indicates that an undesirable result or status can occur if the relevant notice is
ignored.
Note
highlights important information on the product, using the product, or part of the
documentation that is of particular importance and that will be of benefit to the
user.
3
MOBIC T8
A5E00263210
TrademarksSIMATICR, SIMATIC HMIRand SIMATIC NETRare registered trademarks of
SIEMENS AG.
Third parties using for their own purposes any other names in this document which
refer to trademarks might infringe upon the rights of the trademark owners.
Safety Instructions Regarding your Product:
Before you use the product described here, read the safety instructions below tho-
roughly.
Qualified Personnel
Only qualified personnel should be allowed to install and work on this equipment.
Qualified persons are defined as persons who are authorized to commission, to
ground, and to tag circuits, equipment, and systems in accordance with establis-
hed safety practices and standards.
Correct Usage of Hardware Products
Note the following:
!Warning
This device and its components may only be used for the applications described in
the catalog or the technical description, and only in connection with devices or
components from other manufacturers which have been approved or recommen-
ded by Siemens.
This product can only function correctly and safely if it is transported, stored, set
up, and installed correctly, and operated and maintained as recommended.
Before you use the supplied sample programs or programs you have written your-
self, make certain that no injury to persons nor damage to equipment can result in
your plant or process.
EU Directive: Do not start up until you have established that the machine on which
you intend to run this component complies with the directive 89/392/EEC.
Correct Usage of Software Products
Note the following:
!Warning
This software may only be used for the applications described in the catalog or the
technical description, and only in connection with software products, devices, or
components from other manufacturers which have been approved or recommen-
ded by Siemens.
Before you use the supplied sample programs or programs you have written your-
self, make certain that no injury to persons nor damage to equipment can result in
your plant or process.
Prior to Startup
Before putting the product into operation, note the following warning:
4MOBIC T8
A5E00263210
Caution
Prior to startup you must observe the instructions in the relevant documentation.
For ordering data of the documentation please refer to the catalogs or contact your
local SIEMENS representative.
We have checked the contents of this manual for agreement with the hardwa-
re and software described. Since deviations cannot be precluded entirely, we
cannot guarantee full agreement. However, the data in this manual are revie-
wed regularly and any necessary corrections included in subsequent edi-
tions. Suggestions for improvement are welcomed.
Disclaimer of LiabilityCopyright ESiemensAG 2003 All rights reserved
The reproduction, transmission or use of this document or its contents is not
permitted without express written authority. Offenders will be liable for
damages. All rights, including rights created by patent grant or registration of
a utility model or design, are reserved.
Siemens AG
Automation and Drives
Postfach 4848, D-90327 Nürnberg Subject to technical change.
Siemens Aktiengesellschaft A5E00263210
SIMATIC HMI
HMI Device
MOBIC T8 in areas susceptible to
electromagnetic interference
Product information
This documentation is valid for delivery units with order
number:
• 6GK1611-0TA01-1DX0
• 6GK1611-0TA01-1DV0
• 6GK1611-0TA01-0DX0
08/2006
A
5E00882110-01
Safety Guidelines
This manual contains notices you have to observe in order
to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal
safety are highlighted in the manual by a safety alert symbol,
notices referring only to property damage have no safety
alert symbol. These notices shown below are graded
according to the degree of danger.
Danger
indicates that death or severe personal injury will result if
proper precautions are not taken.
Warning
indicates that death or severe personal injury may result if
proper precautions are not taken.
Caution
with a safety alert symbol, indicates that minor personal
injury can result if proper precautions are not taken.
Caution
without a safety alert symbol, indicates that property
damage can result if proper precautions are not taken.
Notice
indicates that an unintended result or situation can occur if
the corresponding information is not taken into account.
If more than one degree of danger is present, the warning
notice representing the highest degree of danger will be
used. A notice warning of injury to persons with a safety alert
symbol may also include a warning relating to property
damage.
Qualified Personnel
The device/system may only be set up and used in
conjunction with this documentation. Commissioning and
operation of a device/system may only be performed by
qualified personnel. Within the context of the safety notes in
this documentation qualified persons are defined as persons
who are authorized to commission, ground and label
devices, systems and circuits in accordance with established
safety practices and standards.
Trademarks
All names identified by ® are registered trademarks of the
Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own
purposes could violate the rights of the owner.
Prescribed Usage
Note the following:
Warning
This device may only be used for the applications described
in the catalog or the technical description and only in
connection with devices or components from other
manufacturers which have been approved or recommended
by Siemens. Correct, reliable operation of the product
requires proper transport, storage, positioning and
assembly as well as careful operation and maintenance.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure
consistency with the hardware and software described.
Since variance cannot be precluded entirely, we cannot
guarantee full consistency. However, the information in this
publication is reviewed regularly and any necessary
corrections are included in subsequent editions.
Siemens AG
Automation and Drives
Postfach 48 48
90437 NÜRNBERG
DEUTSCHLAND
A5E00882110-01
Edition 08/2006
Copyright © Siemens AG 2006.
Technical data subject to
change
MOBIC T8 in areas susceptible to
electromagnetic interference 1
Validity
This product information is valid for the MOBIC T8 with one
of the following order numbers:
•6GK1611-0TA01-1DX0
•6GK1611-0TA01-1DV0
•6GK1611-0TA01-0DX0
A MOBIC T8 with one of these order numbers is delivered
with a CP 1515 Wireless-LAN PCMCIA card already built-in.
This product information contains important information. The
notes supplement the operating instructions for the HMI
device and take precedence over statements in the
operating instructions, the release notes, and in the online
help.
This product information contains important notes on the
following issues:
•Use in areas susceptible to electromagnetic interference
•Enhancement of the WLAN range
•Enhancement of the rechargeable battery time
MOBIC T8
Product information, 08/2006, A5E00882110-01 1-1
MOBIC T8 in areas susceptible to electromagnetic interference
Use in areas susceptible to electromagnetic interference
Caution
Wireless LAN PCMCIA card CP 1515
If you use the MOBIC T8 in an area susceptible to
electromagnetic interference, for example an airplane or in
a hospital, then you have to disable the wireless LAN
PCMCIA card CP 1515 or, depending on how it is installed,
remove or unplug it. This applies also for all other areas in
which wireless LAN is not permitted.
If a CP 1515 is installed or inserted in a MOBIC T8, then
the icon is visible in the status area.
If the icon is displayed in the status area, the CP 1515
is not operational, but it is enabled. Disable the CP 1515 if
you are in an area susceptible to electromagnetic
interference with the MOBIC T8.
If no icon is displayed in the status area, the CP 1515 has
been disabled or removed.
Removing the CP 1515
It makes sense to remove the CP 1515 if the MOBIC T8 is to
be used continually in an area susceptible to
electromagnetic interference. The removal and installation of
the CP 1515 is described in the manual "Industrial
Communication" for the MOBIC T8, chapter 4.5.
Unplugging or disabling the CP 1515
It makes sense to unplug or disable the CP 1515 if the
MOBIC T8 is to be used temporarily in an area susceptible
to electromagnetic interference.
MOBIC T8
1-2 Product information, 08/2006, A5E00882110-01
Other manuals for SIMATIC NET MOBIC T8
2
Table of contents
Other Siemens Controllers manuals
Siemens
Siemens SQK349.00/209 User manual
Siemens
Siemens SIMODRIVE 611U User manual
Siemens
Siemens SIMATIC ET 200SP User manual
Siemens
Siemens 3RT2.1.-1 User manual
Siemens
Siemens Simatic S7-300 User manual
Siemens
Siemens N 501 Service manual
Siemens
Siemens SINAMICS S120 Quick start guide
Siemens
Siemens SKD32 Series User manual
Siemens
Siemens RMU7 Sereis User manual
Siemens
Siemens Simatic S7-300 User manual
Siemens
Siemens DE406M Series User manual
Siemens
Siemens SIMATIC NET CP 1613 A2 User manual
Siemens
Siemens DOL Series User manual
Siemens
Siemens SQS35.53 User manual
Siemens
Siemens SFA21/18 User manual
Siemens
Siemens RVP550 User manual
Siemens
Siemens simovert masterdrives User manual
Siemens
Siemens SQM5 Series Owner's manual
Siemens
Siemens SIMATIC S5-115F User manual
Siemens
Siemens S7-1200 TELECONTROL User manual
Popular Controllers manuals by other brands
Digiplex
Digiplex DGP-848 Programming guide
YASKAWA
YASKAWA SGM series user manual
Sinope
Sinope Calypso RM3500ZB installation guide
Isimet
Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions
LSIS
LSIS sv-ip5a user manual
Rockwell Automation
Rockwell Automation 1769-L31 installation instructions
