Siemens Simatic S7-1500 User manual

Manual

Digital output module DQ 8x230VAC/5A ST (6ES7522-5HF00-0AB0)

07/2014Edition

Answers for industry.

SIMATIC

S7-1500

DQ 8x230VAC/5A ST Digital Output

Module (6ES7522-5HF00-0AB0)

___________________

SIMATIC

S7-1500/ET 200MP

DQ 8x230VAC/5A ST Digital Output

Module (6ES7522-5HF00-0AB0)

Manual

07/2014

A5E03485590

-AC

Preface

Documentation guide

Product overview

Wiring

Parameters/address space

Interrupts/diagnostics alarms

Technical specifications

Dimensional drawing

Parameter data records

Open Source Software

Siemens AG

Industry Sector

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E03485590-AC

Ⓟ

07/2014 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by

personnel qualified

for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0)

Manual, 07/2014, A5E03485590-AC 3

Preface

Purpose of the documentation

This manual supplements the system manuals:

●S7-1500 Automation System

●ET 200MP Distributed I/O System

Functions that relate in general to the systems are described in these system manuals.

The information provided in this manual and in the system/function manuals supports you in

commissioning the systems.

Changes compared to previous version

Changes described in this manual, compared to the previous version:

●Module integrated in hardware catalog STEP 7 (TIA Portal) V13, Update 3 or higher with

the function: Module-internal shared output (MSO) for Shared Device

●Appendix Open Source Software amended

Conventions

The term "CPU" is used in this manual both for the CPUs of the S7-1500 automation system,

as well as for interface modules of the ET 200MP distributed I/O system.

Please also observe notes marked as follows:

Note

A note contains important information regarding the product

described in the documentation

or its handling, or draws special attention to a section of the documentation.

Preface

DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0)

4Manual, 07/2014, A5E03485590-AC

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, solutions, machines, equipment and/or networks. They are

important components in a holistic industrial security concept. With this in mind, Siemens’

products and solutions undergo continuous development. Siemens recommends strongly

that you regularly check for product updates.

For the secure operation of Siemens products and solutions, it is necessary to take suitable

preventive action (e.g. cell protection concept) and integrate each component into a holistic,

state-of-the-art industrial security concept. Third-party products that may be in use should

also be considered. You can find more information about industrial security on the Internet

(http://www.siemens.com/industrialsecurity).

To stay informed about product updates as they occur, sign up for a product-specific

newsletter. You can find more information on the Internet

(http://support.automation.siemens.com).

Open Source Software

Open-source software is used in the firmware of the product described. Open Source

Software is provided free of charge. We are liable for the product described, including the

open-source software contained in it, pursuant to the conditions applicable to the product.

Siemens accepts no liability for the use of the open source software over and above the

intended program sequence, or for any faults caused by modifications to the software.

For legal reasons, we are obliged to publish the original text of the license conditions and

DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0)

Manual, 07/2014, A5E03485590-AC 5

Table of contents

Preface ................................................................................................................................................... 3

1 Documentation guide .............................................................................................................................. 6

2 Product overview .................................................................................................................................... 8

2.1 Properties..................................................................................................................................8

3 Wiring ................................................................................................................................................... 11

4 Parameters/address space ................................................................................................................... 14

4.1 Parameters .............................................................................................................................14

4.2 Address space ........................................................................................................................15

5 Interrupts/diagnostics alarms................................................................................................................. 18

5.1 Status and error displays ........................................................................................................18

5.2 Interrupts.................................................................................................................................20

5.3 Diagnostics alarms..................................................................................................................20

6 Technical specifications ........................................................................................................................ 21

A Dimensional drawing............................................................................................................................. 27

B Parameter data records......................................................................................................................... 29

B.1 Parameter assignment and structure of the parameter data records.....................................29

C Open Source Software.......................................................................................................................... 31

DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0)

6Manual, 07/2014, A5E03485590-AC

Documentation guide

The documentation for the SIMATIC S7-1500 automation system and the SIMATIC

ET 200MP distributed I/O system is arranged into three areas.

This arrangement enables you to access the specific content you require.

Basic information

System Manual and Getting Started describe in detail the configuration, installation, wiring

and commissioning of the SIMATIC S7-1500 and ET 200MP systems. The STEP 7 online

help supports you in the configuration and programming.

Device information

Manuals contain a compact description of the module-specific information, such as

properties, terminal diagrams, characteristics, technical specifications.

General information

The function manuals contain detailed descriptions on general topics regarding the SIMATIC

S7-1500 and ET 200MP systems, e.g. diagnostics, communication, Motion Control, Web

server.

You can download the documentation free of charge from the Internet

(http://www.automation.siemens.com/mcms/industrial-automation-systems-

simatic/en/manual-overview/tech-doc-controllers/Pages/Default.aspx).

Changes and supplements to the manuals are documented in a Product Information.

Documentation guide

DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0)

Manual, 07/2014, A5E03485590-AC 7

Manual Collection S7-1500 / ET 200MP

The Manual Collection contains the complete documentation on the SIMATIC S7-1500

automation system and the ET 200MP distributed I/O system gathered together in one file.

You can find the Manual Collection on the Internet

(http://support.automation.siemens.com/WW/view/en/86140384).

My Documentation Manager

The My Documentation Manager is used to combine entire manuals or only parts of these to

your own manual.

You can export the manual as PDF file or in a format that can be edited later.

You can find the My Documentation Manager on the Internet

(http://support.automation.siemens.com/WW/view/en/38715968).

Applications & Tools

Applications & Tools supports you with various tools and examples for solving your

automation tasks. Solutions are shown in interplay with multiple components in the system -

separated from the focus in individual products.

You can find Applications & Tools on the Internet

(http://support.automation.siemens.com/WW/view/en/20208582).

CAx Download Manager

The CAx Download Manager is used to access the current product data for your CAx or CAe

systems.

You configure your own download package with a few clicks.

In doing so you can select:

●Product images, 2D dimension drawings, 3D models, internal circuit diagrams, EPLAN

macro files

●Manuals, characteristics, operating manuals, certificates

●Product master data

You can find the CAx Download Manager on the Internet

(http://support.automation.siemens.com/WW/view/en/42455541).

DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0)

8Manual, 07/2014, A5E03485590-AC

Product overview

2.1

Properties

Article number

6ES7522-5HF00-0AB0

View of the module

Figure 2-1 View of the DQ 8x230VAC/5A ST module

Product overview

2.1 Properties

DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0)

Manual, 07/2014, A5E03485590-AC 9

Properties

The module has the following technical properties:

●8 digital outputs (relays)

●Supply voltage of the 24 V DC relay coils

●Rated output voltage 230 V AC (24 V DC up to 120 V DC/24 V AC up to 230V AC)

●Rated output current 5 A

●Assignable substitute values (per channel)

●Assignable diagnostics (per channel group)

●Suitable for solenoid valves, DC contactors, and indicator lights

The module supports the following functions:

Table 2- 1 Version dependencies of the module functions

Function

Firmware version

of the module

Configuration software

STEP 7

(TIA Portal)

GSD file in STEP 7

(TIA Portal) V12 or higher, or

STEP 7 V5.5 SP3 or higher

Firmware update

V1.0.0 or higher

V12 or higher

Identification data I&M0 to I&M3

V1.0.0 or higher

V12 or higher

Parameter assignment in RUN

V1.0.0 or higher

V12 or higher

Module-internal Shared Output (MSO) V2.0.0 or higher V13 Update 3 or

higher

(PROFINET IO

only)

(PROFINET IO only)

Configurable after interface module

IM 155-5 DP ST

V2.0.0 or higher V13 or higher X

You can configure the module with STEP 7 (TIA Portal) and with a GSD file.

Accessories

The following accessories are supplied with the module and can also be ordered separately

as spare parts:

●Labeling strips

●U connector

●Universal front door

Other manuals for Simatic S7-1500

Table of contents

Other Siemens Control Unit manuals

Siemens

Siemens SIRIUS 8WD4428-0B User manual

Siemens

Siemens LMV3 series Owner's manual

Siemens

Siemens SINUMERIK 840D sl User manual

Siemens

Siemens Simatic TI405 User manual

Siemens

Siemens Cerberus Pyrotronics LP-30 User manual

Siemens

Siemens SIWAREX FTC Application guide

Siemens

Siemens SIMATIC CPU 1515SP PC2 F User manual

Siemens

Siemens Flowrite VF 599 Series Owner's manual

Siemens

Siemens SINAMICS S Series User manual

Siemens

Siemens SIMATIC ET 200SP User manual

Siemens

Siemens GAMMA 5WG1118-4AB01 Service manual

Siemens

Siemens ST950 User manual

Siemens

Siemens RMB795B Operator's manual

Siemens

Siemens Add 7 AddFEM User manual

Siemens

Siemens SIRIUS 3RW44 User manual

Siemens

Siemens SINUMERIK 840D Parts list manual

Siemens

Siemens SINAMICS G120 User manual

Siemens

Siemens HTRI-M User manual

Siemens

Siemens IONPURE VNX50HH-2 Manual

Siemens

Siemens 2AI 2/4WIRE HF User manual

Siemens

Siemens Cerberus Pyrotronics MT-30 User manual

Siemens

Siemens SINUMERIK 840D Setup guide

Siemens

Siemens 3VA9908-0BC Series User manual

Siemens

Siemens WF 705 Operating and installation instructions

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual