Siemens SIMATIC ET 200SP User manual

DI 8x24VDC ST digital input module

(6ES7131-6BF00- 

0BA0)

_________________

_____

____________

_________________

SIMATIC

ET 200SP

DI 8x24VDC ST digital input module

(6ES7131-6BF00-0BA0)

Manual

03/2012

A5E03574157-01

Preface

Documentation guide

Product overview

Connecting

Parameter

assignment/addressing

Interrupt, error and system

messages

Technical specifications

Parameter data record

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.

CAUTION

without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.

NOTICE

indicates that an unintended result or situation can occur if the relevant information is not taken into account.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Siemens AG

Industry Sector

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E03574157-01

Ⓟ 03/2012 Technical data subject to change

DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0)

Manual, 03/2012, A5E03574157-01 3

Preface

Purpose of the documentation

This device manual complements the system manual ET 200SP Distributed I/O System.

General functions of the ET 200SP are described in the system manual ET 200SP

distributed I/O system (http://support.automation.siemens.com/WW/view/en/58649293).

The information provided in this device manual and the system manual enables you to

commission the ET 200SP system.

Preface

DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0)

4 Manual, 03/2012, A5E03574157-01

DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0)

Manual, 03/2012, A5E03574157-01 5

Table of contents

Preface ...................................................................................................................................................... 3

1 Documentation guide................................................................................................................................. 7

2 Product overview ....................................................................................................................................... 9

2.1 Properties of the DI 8x24VDC ST..................................................................................................9

3 Connecting .............................................................................................................................................. 11

3.1 Terminal assignment....................................................................................................................11

3.2 Schematic circuit diagram............................................................................................................12

4 Parameter assignment/addressing .......................................................................................................... 13

4.1 Parameters...................................................................................................................................13

4.2 Declaration of parameters............................................................................................................14

4.3 Address space .............................................................................................................................14

5 Interrupt, error and system messages ..................................................................................................... 15

5.1 Status and error displays .............................................................................................................15

5.2 Diagnostic messages...................................................................................................................17

6 Technical specifications........................................................................................................................... 19

6.1 Technical specifications ...............................................................................................................19

A Parameter data record............................................................................................................................. 21

A.1 Parameter assignment and structure of parameter data record..................................................21

Table of contents

DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0)

6 Manual, 03/2012, A5E03574157-01

DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0)

Manual, 03/2012, A5E03574157-01 7

Documentation guide 1

Introduction

The following paragraph gives you an overview of the additional documentation you need to

use the DI 8×24VDC ST digital input module.

Documentation for the ET 200SP distributed I/O system with DI 8×24VDC ST digital input module





%DVH8QLWV

(763

Figure 1-1 Example of a system structure

Table 1- 1 Documentation for the ET 200SP distributed I/O system with DI 8×24VDC ST digital

input module

Number Component Documentation Most important contents

① System ET 200SP distributed I/O system

(http://support.automation.siemens.com

/WW/view/en/58649293) system

manual

Application planning

Installation

Connecting

Commissioning

② BaseUnits Device manual ET 200SP BaseUnits

(http://support.automation.siemens.com

/WW/view/en/58532597/133300)

Technical specifications

Documentation guide

DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0)

8 Manual, 03/2012, A5E03574157-01

DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0)

Manual, 03/2012, A5E03574157-01 9

Product overview 2

2.1 Properties of the DI 8x24VDC ST

Order number

6ES7131-6BF00-0BA0

View of the module

Figure 2-1 View of the DI 8×24VDC ST module

Product overview

2.1 Properties of the DI 8x24VDC ST

DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0)

10 Manual, 03/2012, A5E03574157-01

Properties

● Technical properties

– Digital input module with 8 inputs

– Supply voltage L+

– Sink Input (PNP, P-reading)

– Suitable for connection of switches and 2-wire sensors in accordance with IEC 61131,

type 3

– Channel-by-channel programmable input delay 0.05 ms to 20 ms

– Module-based programmable diagnostics

● Supported functions

– I&M identification data

– Firmware update

– Configuration in RUN

Accessories

The following components can be used with the module:

● Labeling strips

● Color identification labels

● Reference identification label

● Shield connector

Other manuals for SIMATIC ET 200SP

101

Table of contents

Other Siemens Control Unit manuals

Siemens

Siemens SINAMICS G120D CU240D-2 DP User manual

Siemens

Siemens Simatic S7-1500 User manual

Siemens

Siemens 3VM9.88-0LB10 User manual

Siemens

Siemens SINAMICS PM230 User manual

Siemens

Siemens DMS8000 MP4 Series Operating and maintenance instructions

Siemens

Siemens SITOP UPS1600 User manual

Siemens

Siemens SINAMICS G120 User manual

Siemens

Siemens SINUMERIK 840Di Parts list manual

Siemens

Siemens HLIM User manual

Siemens

Siemens 3KC ATC3100 User manual

Siemens

Siemens 6ES5-424 Product manual

Siemens

Siemens SIMATIC Panel PC 677 User manual

Siemens

Siemens MJ-4 Series User manual

Siemens

Siemens SIMATIC ET 200SP IM 155-6 PN/2 HF User manual

Siemens

Siemens SIMOVERT Masterdrives SSB User manual

Siemens

Siemens SIWAREX JB User manual

Siemens

Siemens FDK:085U0321 User manual

Siemens

Siemens SIMATIC S7 3964 Instruction manual

Siemens

Siemens FDCI723 User manual

Siemens

Siemens SIMATIC ET 200AL User manual

Siemens

Siemens Cerberus Pyrotronics NIM-1M User manual

Siemens

Siemens Cerberus Pyrotronics LP-30 User manual

Siemens

Siemens 3VA9.37-0VF10 User manual

Siemens

Siemens FC1008-A Manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual