Siemens SIMADYN D MS51 User manual

Artisan Technology Group is your source for quality

new and certied-used/pre-owned equipment

• FAST SHIPPING AND

DELIVERY

• TENS OF THOUSANDS OF

IN-STOCK ITEMS

• EQUIPMENT DEMOS

• HUNDREDS OF

MANUFACTURERS

SUPPORTED

• LEASING/MONTHLY

RENTALS

• ITAR CERTIFIED

SECURE ASSET SOLUTIONS

SERVICE CENTER REPAIRS

Experienced engineers and technicians on staff

at our full-service, in-house repair center

WE BUY USED EQUIPMENT

Sell your excess, underutilized, and idle used equipment

We also offer credit for buy-backs and trade-ins

www.artisantg.com/WeBuyEquipment

REMOTE INSPECTION

Remotely inspect equipment before purchasing with

our interactive website at www.instraview.com

LOOKING FOR MORE INFORMATION?

Visit us on the web at www.artisantg.com for more

information on price quotations, drivers, technical

specications, manuals, and documentation

View

Instra

SIEMENS

SIMADYN D

Digital Control System

Program memory submodule

MS5/51/55

User Manual

Edition 11.98 DK-Nr. 252441

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

User Manual, Program memory submodule MS5/51/55

Edition Edition status

1Program memory submodule MS5/51/55 01.94

2Program memory submodule MS5/51/55 09.94

3Program memory submodule MS5/51/55 05.95

4Program memory submodule MS5/51/55 11.98

Copying of this document and giving it to others and the use or

communication of the contents thereof is forbidden without express

authority. Offenders are liable to the payment of damages. All rights

are reserved in the event of the grant of a patent or the registration of

a utility model or design.

We have checked the contents of this Manual to ensure that they

coincide with the described hardware and software. However,

deviations cannot be completely ruled-out, so we cannot guarantee

complete conformance. However, the information in this document is

regularly checked and the necessary corrections included in

subsequent editions. We are thankful for any recommendations or

suggestions.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Contents

Siemens AG Dk-Nr. 252441 Edition 11.98

SIMADYN D Hardware User Manual

Contents

Warning information...................................................................................................................... 1

1. Ordering information.................................................................................................................3

2. Function description.................................................................................................................. 3

3. Application information..............................................................................................................3

3.1. MS55 SRAM memory card........................................................................................ 3

4. Technical data........................................................................................................................... 4

5. Others.......................................................................................................................................4

5.1. Attachments...............................................................................................................4

6. ECB instructions........................................................................................................................ 5

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Warning information

Edition 11.98 Siemens AG Dk-Nr. 252441

SIMADYN D Hardware User Manual

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Warning information

Siemens AG Dk-Nr. 252441 Edition 11.98 1

SIMADYN D Hardware User Manual

N O T E !

The information in this Manual does not purport to cover all details or variations in equipment, nor to provide

for every possible contingency to be met in connection with installation, operation or maintenance.

Should further information be desired or should particular problems arise which are not covered sufficiently for

the purchaser’s purposes, please contact your local Siemens office.

Further, the contents of this Manual shall not become a part of or modify any prior or existing agreement,

committment or relationship. The sales contract contains the entire obligation of Siemens. The warranty

contained in the contract between the parties is the sole warranty of Siemens. Any statements contained

herein do not create new warranties nor modify the existing warranty.

Warning information

W A R N I N G !

Electrical equipment has components which are at dangerous voltage levels.

If these instructions are not strictly adhered to, severe bodily injury and material

damage can result.

Only appropriately qualified personnel may work on this equipment or in its

vicinity.

This personnel must be completely knowledgeable about all the warnings and

service measures according to this User Manual.

The successful and safe operation of this equipment is dependent on proper

handling, installation, operation and maintenance.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Warning information

2Edition 11.98 Siemens AG Dk-Nr. 252441

SIMADYN D Hardware User Manual

Definitions

*QUALIFIED PERSONNEL

For the purpose of this User Manual and product labels, a ”Qualified person” is someone who is familiar with the

installation, mounting, start-up and operation of the equipment and the hazards involved. He or she must have

the following qualifications:

1. Trained and authorized to energize, de-energize, clear, ground and tag circuits and equipment in accordance

with established safety procedures.

2. Trained in the proper care and use of protective equipment in accordance with established safety

procedures.

3. Trained in rendering first aid.

*DANGER

For the purpose of this User Manual and product labels, ”Danger” indicates death, severe personal injury and/or

substantial property damage will result if proper precautions are not taken.

*WARNING

For the purpose of this User Manual and product labels, ”Warning” indicates death, severe personal injury or

property damage can result if proper precautions are not taken.

*CAUTION

For the purpose of this User Manual and product labels, ”Caution” indicates that minor personal injury or

material damage can result if proper precautions are not taken.

*NOTE

For the purpose of this User Manual, ”Note” indicates information about the product or the respective part of the

User Manual which is essential to highlight.

C A U T I O N !

This board contains components which can be destroyed by electrostatic

discharge. Prior to touching any electronics board, your body must be electrically

discharged. This can be simply done by touching a conductive, grounded object

immediately beforehand (e.g. bare metal cabinet components, socket protective

conductor contact).

W A R N I N G !

Hazardous voltages are present in this electrical equipment during operation.

Non-observance of the safety instructions can result in severe personal injury or

property damage.

It is especially important that the warning information in all of the relevant

Operating Instructions are strictly observed.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Ordering information

Siemens AG Dk-Nr. 252441 Edition 11.98 3

SIMADYN D Hardware User Manual

1. Ordering information

MS5 6DD 1610 - 0AH0

MS51 6DD 1610 - 0AK0

MS55 6DD 1610 - 0AH5

2. Function description

Program memory sub-modules MS5/51 and MS55 are used to store the processor program.

The program memory sub-modules are inserted at slot X50 of the PM3, PT31, PT32,PM4,PM5 and

PM6 processor modules in the front panel recess.

The MS5/51 memory sub-module has a 2/4 Mbyte flash memory to store the engineering information

and 8 kbyte EEPROM for operating parameters which can be modified.

The flash memory is a non-volatile flash memory which can be erased and programmed electrically.

The MS55 memory sub-module has a 2 Mbyte SRAM for storing the engineering information and 8

kbyte EEPROM for operating parameters which can be changed.

The SRAM contents are buffered when the voltage fails via a battery inserted in the module. The

battery can be replaced without data loss.

The MS5/51 and MS55 memory sub-modules are based on the JEIDA / PCMCIA industrial standard

for memory cards with a 68-pin connection.

PCMCIA and JEIDA

industry standard

68 pin memory card

Write

protect

switch

3. Application information

3.1. MS55 SRAM memory card

The MS55 memory card has a lithium battery (CR2325, 3.0V/200mAh, 23mm * 2.5mm)

Supplier: e.g. VARTA Batterie AG Hannover

To change the battery, a pointed object is inserted in the hole at the upper end of the memory card.

The battery holder can then be withdrawn and the battery changed. Please observe the correct

polarity when replacing the battery. The battery must be replaced within 30 minutes to prevent data

loss. The battery should be changed every 13 months.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Technical data

4Edition 11.98 Siemens AG Dk-Nr. 252441

SIMADYN D Hardware User Manual

4. Technical data

MS5 MS51 MS55

- Connection acc. to

JEIDA/ PCMCIA 68 pin 68 pin 68 pin

- Storage temperature -20 to +60oC-20 to +60oC-20 to +60oC

- Memory 2 Mbyte flash memory

+ 8 kbyte EEPROM 4 Mbyte flash memory

+ 8 kbyte EEPROM 2 Mbyte SRAM

+ 8 kbyte EEPROM

- Access time 200 ns 200 ns 200 ns

Current drain 5V / 100 mA 5V / 100 mA 5V / 190 mA

Dimensions (W x H x D) 3.3 x 54 x 85.6 mm 3.3 x 54 x 85.6 mm 3.3 x 54 x 85.6 mm

Order No. 6DD1610-0AH0 6DD1610-0AK0 6DD1610-0AH5

Weight 0.03 kg 0.03 kg 0.03 kg

5. Others

5.1. Attachments

Dimension drawing 4SE. 465 610. 9007. 00 MB

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

ECB instructions

Siemens AG Dk-Nr. 252441 Edition 11.98 5

SIMADYN D Hardware User Manual

6. ECB instructions

Components which can be destroyed by electrostatic discharge (ECB)

Generally, electronic boards should only be touched when absolutely necessary.

The human body must be electrically discharged before touching an electronic board. This can be

simply done by touching a conductive, grounded object directly beforehand (e.g. bare metal cubicle

components, socket outlet protective conductor contact.

Boards must not come into contact with highly-insulating materials - e.g. plastic foils, insulated

desktops, articles of clothing manufactured from man-made fibers.

Boards must only be placed on conductive surfaces.

When soldering, the soldering iron tip must be grounded.

Boards and components should only be stored and transported in conductive packaging (e.g.

metalized plastic boxes, metal containers).

If the packing material is not conductive, the boards must be wrapped with a conductive packing

material, e.g. conductive foam rubber or household aluminum foil.

The necessary ECB protective measures are clearly shown in the following diagram.

a = Conductive floor surface d = ECB overall

b = ECB table e = ECB chain

c = ECB shoes f = Cubicle ground connection

Seated Standing Standing/sitting

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

This manual suits for next models

Table of contents

Other Siemens Control Unit manuals

Siemens

Siemens SINUMERIK 802D sl User manual

Siemens

Siemens FDCI723 User manual

Siemens

Siemens SITRANS PCS 7 Parts list manual

Siemens

Siemens SIPROTEC4 7SJ61 User manual

Siemens

Siemens AP 641 Service manual

Siemens

Siemens 3AD8 User manual

Siemens

Siemens 7KM4211-1BA00-3AA0 User manual

Siemens

Siemens SINAMICS G110M User manual

Siemens

Siemens Cerberus Pyrotronics LP-30 User manual

Siemens

Siemens 8DO User manual

Siemens

Siemens 6SE7022-0ES87-2DC0 Instruction manual

Siemens

Siemens TSM-1 User manual

Siemens

Siemens QAA73.210 User manual

Siemens

Siemens SIMATIC User manual

Siemens

Siemens SENTRON 7KM9300-0AM00-0AA0 User manual

Siemens

Siemens SINUMERIK 840D sl User manual

Siemens

Siemens SIMOTION TM15 Quick start guide

Siemens

Siemens SIMADYN D T400 Parts list manual

Siemens

Siemens SMF6120 User manual

Siemens

Siemens SINAMICS G120D CU240D-2 DP User manual

Siemens

Siemens VRD Series Owner's manual

Siemens

Siemens SIMATIC NET CP 1628 User manual

Siemens

Siemens OLM/P11 V4.0 User manual

Siemens

Siemens SINUMERIK 808D User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual