Siemens SENTRON User manual

Equipment Manual

05/2020

L1V30408520AG

-03

Introduction

Description

Installation

Connection

Commissioning

Service and maintenance

Technical specifications

Appendix

Siemens AG

Smart Infrastructure

Electrical Products

Postfach 10 09 53

93009 Regensburg

GERMANY

Ⓟ

02/2021 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Equipment Manual, 05/2020, L1V30408520AG-03 3

Table of contents

1 Introduction........................................................................................................................................... 5

1.1 Scope of delivery ................................................................................................................. 5

1.2 Latest information ............................................................................................................... 5

1.3 Security information ............................................................................................................ 6

1.4 Open Source Software ......................................................................................................... 7

2 Description............................................................................................................................................. 9

2.1 Area of application............................................................................................................... 9

2.2 Performance features of the I(N), I(Diff), analog module ...................................................... 9

2.3 Design............................................................................................................................... 11

3 Installation........................................................................................................................................... 13

3.1 Installation location ........................................................................................................... 13

3.2 Installation steps................................................................................................................ 14

4 Connection .......................................................................................................................................... 15

4.1 Safety information............................................................................................................. 15

4.2 Connections ...................................................................................................................... 16

5 Commissioning .................................................................................................................................... 25

5.1 Overview........................................................................................................................... 25

5.2 Setting the expansion module parameters ......................................................................... 26

5.3 Parameterizing with powerconfig....................................................................................... 29

5.4 Reading out measured values............................................................................................. 30

6 Service and maintenance .................................................................................................................... 31

6.1 Calibration......................................................................................................................... 31

6.2 Firmware update ............................................................................................................... 31

6.3 Troubleshooting guide....................................................................................................... 31

6.4 Warranty ........................................................................................................................... 32

7 Technical specifications....................................................................................................................... 33

A Appendix ............................................................................................................................................. 37

A.1 Modbus measured quantities with function codes 0x03 and 0x04 ...................................... 37

A.2 Average value quantities.................................................................................................... 37

Index.................................................................................................................................................... 41

Table of contents

4Equipment Manual, 05/2020, L1V30408520AG-03

Equipment Manual, 05/2020, L1V30408520AG-03 5

Introduction

1.1 Scope of delivery

Included in package:

•1 x 7KM PAC expansion module I(N), I(Diff), analog

•1 x operating instructions

1.2 Latest information

Up-to-the-minute information

You can find further support on the Internet:

Website (https://support.industry.siemens.com/my/ww/en/requests)

General safety information

DANGER

Hazardous voltage

Will cause death or serious injury.

Turn off and lock out all power supplying this equipment before working on this device.

Note

Only qualified personnel are allowed to

install, commission or service this device.

•

Wear the prescribed protective clothing.

•

Observe the general equipment regulations and safety regulations for working on high-

voltage installations (e.g. DIN VDE, NFPA 70E) as well as national or international

regulations.

•

Check that all connections are correctly made before startup.

•

Before power is applied to the device for the first time, it must have been located in the

operating area for at least two hours in order to reach temperature balance and avoid

humidity and condensation.

•

The limits given in the technical data must not be exceeded even during commissioning or

testing.

•

Condensation on the device is not permissible during operation.

Introduction

1.3 Security information

6Equipment Manual, 05/2020, L1V30408520AG-03

Note

These operating instructions do not purport to cover all details or variations in equipment, or

to provide for every possible contingency in connection with installation, operation, or

maintenance. Should additional i

nformation be desired, or should particular problems arise

that are not handled in detail in the operating instructions, please contact Technical Support

for the information you require.

See also

Technical assistance (https://support.industry.siemens.com/My/ww/en/requests)

Industrial security (http://www.siemens.com/industrialsecurity)

Siemens Industrial Security RSS Feed (http://www.siemens.com/industrialsecurity)

www.opensource.org (https://opensource.org/)

1.3 Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions constitute one element of such a concept.

Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be connected

to an enterprise network or the Internet if and to the extent such a connection is necessary

and only when appropriate security measures (e.g. firewalls and/or network segmentation)

are in place.

For additional information on industrial security measures that may be implemented, please

visit (https://www.siemens.com/industrialsecurity).

Siemens’ products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends that product updates are applied as soon as they are

available and that the latest product versions are used. Use of product versions that are no

longer supported, and failure to apply the latest updates may increase customer's exposure to

cyber threats.

To keep up to date with all the latest product updates, subscribe to the Siemens Industrial

Security RSS Feed at (https://www.siemens.com/industrialsecurity).

Introduction

1.4 Open Source Software

Equipment Manual, 05/2020, L1V30408520AG-03 7

1.4 Open Source Software

This product, solution or service ("Product") contains third-party software components. These

components are Open Source Software licensed under a license approved by the Open

Source Initiative (https://www.opensource.org) or similar licenses as determined by SIEMENS

("OSS") and/or commercial or freeware software components. With respect to the OSS

components, the applicable OSS license conditions prevail over any other terms and

conditions covering the Product. The OSS portions of this Product are provided royalty-free

and can be used at no charge.

If SIEMENS has combined or linked certain components of the Product with/to OSS

components licensed under the GNU LGPL version 2 or later as per the definition of the

applicable license, and if use of the corresponding object file is not unrestricted ("LGPL

Licensed Module", whereas the LGPL Licensed Module and the components that the LGPL

Licensed Module is combined with or linked to is the "Combined Product"), the following

additional rights apply, if the relevant LGPL license criteria are met: (i) you are entitled to

modify the Combined Product for your own use, including but not limited to the right to

modify the Combined Product to relink modified versions of the LGPL Licensed Module, and

(ii) you may reverse-engineer the Combined Product, but only to debug your modifications.

The modification right does not include the right to distribute such modifications and you

shall maintain in confidence any information resulting from such reverse-engineering of a

Combined Product.

Certain OSS licenses require SIEMENS to make source code available, for example, the GNU

General Public License, the GNU Lesser General Public License and the Mozilla Public License.

If such licenses are applicable and this Product is not shipped with the required source code, a

copy of this source code can be obtained by anyone in receipt of this information during the

period required by the applicable OSS licenses by contacting the following address:

Siemens AG

Smart Infrastructure

Electrical Products

Technical Support

Postfach 10 09 53

93009 Regensburg

Germany

You will find Technical Support under (https://www.siemens.com/support-request).

Keyword: Open Source Request (please specify Product name and version, if applicable)

SIEMENS may charge a handling fee of up to 5 EUR to fulfil the request.

Warranty regarding further use of the Open Source Software

SIEMENS' warranty obligations are set forth in your agreement with SIEMENS. SIEMENS does

not provide any warranty or technical support for this Product or any OSS components

contained in it if they are modified or used in any manner not specified by SIEMENS. The

license conditions may contain disclaimers that apply between you and the respective

licensor. For the avoidance of doubt, SIEMENS does not make any warranty commitment on

behalf of or binding upon any third-party licensor. The Open Source Software used in the

product and the license agreements concerning this software can be found in the

Readme_OSS.

Other manuals for SENTRON

Table of contents

Other Siemens Control Unit manuals

Siemens

Siemens WFZ43 User manual

Siemens

Siemens Simatic S7-1500 User manual

Siemens

Siemens CPU 412-5H Technical Document

Siemens

Siemens SR-35 User manual

Siemens

Siemens SINUMERIK 840Di sl Quick start guide

Siemens

Siemens SIMATIC ET 200SP User manual

Siemens

Siemens LME11 series User manual

Siemens

Siemens SIMATIC User manual

Siemens

Siemens A80407-01 User manual

Siemens

Siemens SIMATIC ET 200S User manual

Siemens

Siemens SINUMERIK 840D Simodrive 611 digital User guide

Siemens

Siemens Simatic S7-1500/ET 200MP Technical Document

Siemens

Siemens Cerberus Pyrotronics MT-30 User manual

Siemens

Siemens HOTEL SOLUTION HTC3.1/A User manual

Siemens

Siemens LEC1 Series User manual

Siemens

Siemens SINUMERIK 840D sl Owner's manual

Siemens

Siemens PM250 Assembly instructions

Siemens

Siemens SENTRON ATC6500 User manual

Siemens

Siemens SIMATIC 505 PPX:505-6108A User manual

Siemens

Siemens SIMATIC ET 200SP CM 1xDALI Owner's manual

Siemens

Siemens VVI46 /2 Series User manual

Siemens

Siemens SITRANS AW 7MP3112 Series User manual

Siemens

Siemens ZU-35 User manual

Siemens

Siemens MC35 Terminal User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual