Siemens PXC-16 Compact Product manual

PXC Compact Series

Technical Reference Manual

145-172

Building Technologies

2018

-09-25 Restricted

| 100

Siemens Industry, Inc.

Technical Reference Manual

145-172

Building Technologies

Restricted

2018-09-25

Notice

Document information is subject to change without notice by Siemens Industry, Inc.

Companies, names, and various data used in examples are fictitious unless otherwise

noted. No part of this document may be reproduced or transmitted in any form or by

any means, electronic or mechanical, for any purpose, without the express written

permission of Siemens Industry, Inc.

Warning

This equipment generates, uses, and can radiate radio frequency energy. If equipment

is not installed and used in accordance with the instructions manual, it may cause

interference to radio communications. Equipment has been tested and found to comply

within the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These

limits are designed to provide reasonable protection against such interference when

operated in a commercial environment. Operation of this equipment in a residential

area is likely to cause interference. Residential area equipment users are required to

take whatever measures necessary to correct the interference at their own expense.

Service Statement

Control devices are combined to make a system. Each control device is mechanical in

nature and all mechanical components must be regularly serviced to optimize their

operation. Siemens Industry, Inc. branch offices and authorized distributors offer

Technical Support Programs that will ensure continuous, trouble-free system

performance.

For further information, contact your nearest Siemens Industry representative.

FCC Regulations

The manual for an intentional or unintentional radiator shall caution the user that

changes or modifications not expressly approved by the party responsible could void

the user’s authority to operate the equipment.

For a Class B digital device or peripheral, the instructions furnished the user shall

include the following or similar statement, placed in a prominent location in the text of

the manual:

NOTE: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not in-

stalled and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

●

Reorient or relocate the receiving antenna.

●

Increase the separation between the equipment and receiver.

●

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

●

Consult the dealer or an experienced radio/TV technician for help.

3 |

100

Siemens Industry, Inc.

Technical Reference Manual

145-172

Building Technologies

Restricted

2018-09-25

To the Reader

Your feedback is important to us. If you have comments about this manual, please

submit them to: SBT_technical.editor.us.sbt@siemens.com

Credits

APOGEE, APOGEE GO, InfoCenter Administrator, InfoCenter Report Manager,

InfoCenter Server, InfoCenter Suite, and Insight are registered trademarks of Siemens

Industry, Inc.

Desigo® and Desigo® CC™ are registered trademarks of Siemens Schweiz AG.

Other product or company names mentioned herein may be the trademarks of their

respective owners.

Printed in the USA.

Cyber security disclaimer

Siemens provides a portfolio of products, solutions, systems and services that includes

security functions that support the secure operation of plants, systems, machines and

networks. In the field of Building Technologies, this includes building automation and

control, fire safety, security management as well as physical security systems.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art

security concept. Siemens’ portfolio only forms one element of such a concept.

You are responsible for preventing unauthorized access to your plants, systems,

machines and networks which should only be connected to an enterprise network or

the internet if and to the extent such a connection is necessary and only when

appropriate security measures (e.g. firewalls and/or network segmentation) are in

place. Additionally, Siemens’ guidance on appropriate security measures should be

taken into account. For additional information, please contact your Siemens sales

representative or visit https://www.siemens.com/global/en/home/company/topic-

areas/future-of-manufacturing/industrial-security.html.

Siemens’ portfolio undergoes continuous development to make it more secure.

Siemens strongly recommends that updates are applied as soon as they are available

and that the latest versions are used. Use of versions that are no longer supported,

and failure to apply the latest updates may increase your exposure to cyber threats.

Siemens strongly recommends to comply with security advisories on the latest security

threats, patches and other related measures, published, among others, under

https://www.siemens.com/cert/en/cert-security-advisories.htm.

Siemens Industry, Inc.

Technical Reference Manual

145-172

Building Technologies

Restricted

2018-09-25

| 100

Table of Contents

Cyber security disclaimer ................................................................................................3

Compact Series Product Overview ............................................................................. 7

Compatibility with the APOGEE Automation System......................................................7

BACnet Protocol Compatibility ..............................................................................8

TCP/IP Protocol Compatibility...............................................................................8

Required IP Addresses ..........................................................................8

Device Registration................................................................................8

Address Assignment ..............................................................................8

System Program..............................................................................................................9

Minimum Firmware Revision Required ...............................................................10

License Manager.................................................................................................10

Purpose of Licenses ............................................................................11

Supported Point Types ..................................................................................................12

PXC Compact Series, Rev 1 Hardware, Point Types .........................................14

16- and 24-Point Compact Series Diagram...................................................................15

36-Point Compact Series Product Diagram ..................................................................17

Hardware Features................................................................................................... 19

24 Vdc External Sensor Power Source .........................................................................20

Shield Termination ..............................................................................................20

Custom Sensor Support ......................................................................................21

Memory..........................................................................................................................21

Flash Read-Only Memory (Flash ROM)..............................................................22

Compressed ROM ...............................................................................22

Auto-Restore and Database Backup to Flash .....................................22

Auto Save ............................................................................................23

File System Operations........................................................................23

Random Access Memory (RAM).........................................................................23

Compact Series Backup Batteries.................................................................................23

AA Battery ...........................................................................................................24

AA Battery ...........................................................................................................25

Coin Cell Battery .................................................................................................26

Coin Cell Battery .................................................................................................27

Memory Size and Typical Battery Backup Time .................................................28

Compact Series Specifications......................................................................................28

Sensor Limits.......................................................................................................33

Communication Connections.........................................................................................33

HMI and Tool Ports .............................................................................................34

Pin-Out Diagrams for HMI Connectors ................................................35

10B/100B Ethernet Port ......................................................................................36

5 |

100

Siemens Industry, Inc.

Technical Reference Manual

145-172

Building Technologies

Restricted

2018-09-25

RS-485 Port.........................................................................................................36

FLN Support.........................................................................................37

PXC Compact on P1............................................................................38

Virtual AEM ..........................................................................................38

USB Host Port .....................................................................................................39

TX-I/O Island Bus ................................................................................................39

HOA (Hand-Off-Auto) Upgrade Kits ..............................................................................39

HOA Specifications .............................................................................................40

Hardware Features..............................................................................................40

Default Mapping ..................................................................................................40

Communication ...................................................................................................41

Using the HOA Switches.....................................................................................42

PXC Compact on P1 .....................................................................................................44

What is a PXC Compact on P1? .........................................................................44

P1 Mode Application ...........................................................................................45

P1 Mode Operation .............................................................................................46

P1 Mode Enhanced Field Panel Point Team ......................................................47

Tips for P1 Mode.................................................................................................48

Backing up and Restoring the PXC Compact Database .....................48

Loading Applications with WCIS..........................................................48

Merging Multiple Applications into One .ISB File.................................48

Using the P1 COMM Panel Team Point ..............................................48

Miscellaneous ......................................................................................49

Referencing Points on the PXC Compact on P1 .................................49

Procedures for Advanced Features ....................................................................49

Adding Unused I/O for PXC Compact on P1 (Optional)......................49

Changing the Point Team Descriptor After Database Conversion ......50

Defining an L2SL from a PXC Compact on P1 into the Host Field

Panel 50

Identifying the Hardware Model Used in an Application Design..........51

Making Changes to the Original PXC Compact on P1 Database .......52

Program to Allow LPACI Points to Count Over the LAO Maximum

Value 53

Real Time Applications in a PXC Compact on P1...............................54

Synchronizing System Time in a PXC Compact on P1 .......................58

Default Applications ............................................................................................59

Point Database for Application 3916...................................................................60

Point Database for Application 3924...................................................................61

PXM10S/T Product Overview and Description .............................................................62

Product Features.................................................................................................63

Communication Connections...............................................................63

Requirements ......................................................................................................63

Siemens Industry, Inc.

Technical Reference Manual

145-172

Building Technologies

Restricted

2018-09-25

| 100

Application Menus ...............................................................................................64

Operator Display Specifications ..........................................................................64

Operator Display Layout......................................................................................65

Operator Display Menu Tree...............................................................................68

Logging In ............................................................................................69

Logging Off ..........................................................................................73

Navigation Menu .................................................................................................74

Alarms Application Menu.....................................................................................75

Points (Command and Release) Application Menu ............................................77

Point Monitor Application Menu ..........................................................................78

Settings Application Menu...................................................................................80

Unitary Equipment Controller ........................................................................................81

Unitary Equipment Controller Specifications.......................................................83

Compact Series Smoke Control Application Requirements ....................................... 86

Example ALN Configuration for Smoke Control Applications .......................................87

Service Information .................................................................................................. 88

Electrostatic Discharge..................................................................................................88

Ordering Replacement Parts .........................................................................................88

Replacing the Batteries .................................................................................................88

Reinstalling the Mounting Tabs .....................................................................................89

Troubleshooting Compact Field Panels ........................................................................90

Analog Input and Analog Output Points ..............................................................90

BATT LOW LED ..................................................................................................91

RUN LED.............................................................................................................92

TX and RX LEDs .................................................................................................92

Communication ...................................................................................................93

Display .............................................................................................................93

Errors .............................................................................................................94

Troubleshooting the TX-I/O Island Bus .........................................................................94

Troubleshooting the LCD Panel Indications........................................................95

Resetting an I/O Module to Factory Settings ......................................................97

Replacing a TX-I/O Plug-in Module.....................................................................98

Replacing a TX-I/O Module Assembly ................................................................98

Compact Series Product Overview

Compatibility with the APOGEE Automation System

7 |

100

Siemens Industry, Inc.

Technical Reference Manual

145-172

Building Technologies

Restricted

2018-09-25

Compact Series Product Overview

The PXC Compact Series operates on the Automation Level Network (ALN) or the

Field Level Network (FLN).

●When connected to the ALN, the PXC Compact uses a logical point firmware

database to communicate directly with PXC Modulars, MBCs, RBCs, MECs, SCUs,

and other nodes on the network.

●When connected to the MS/TP FLN, the PXC Compact operates as a third-party

BACnet device.

●When the PXC-16 or PXC-24 is connected to the P1 FLN, it operates as a P1

device.

–No license is required when using the PXC Compact as an FLN device.

–PXC Compact on P1 displays as a TEC with application range 3000-3899.

●The PXC Compact is available with 16, 24, or 36 point terminations.

–Selected PXC-24 and PXC-16 models provide an extended temperature range

for the control of rooftop devices.

–Optional hot-swappable HOA (Hand/Off/Auto) Modules for the PXC Compact

Series enable output points to be manually placed into HAND, ON/OFF, or

AUTO control.

Support for FLN Devices

●Selected models in the PXC Compact Series can support P1 or MS/TP FLN

devices. Those which support FLN devices may require an additional license.

Selected models can be purchased with the license already installed.

NOTE:

No license is required when the

PXC Compact is being polled as an FLN device on

the P1 or MS/TP FLN.

TX-I/O Island Bus Support

●The PXC-36 supports the TX-I/O Island Bus, which uses TX-I/O modules to

expand the number of point terminations.

–Selected PXC-36 models require a license to support the TX-I/O Island Bus.

–For more information on connecting the PXC-36 to the Island Bus, see the TX-

I/O Island Bus Technical Reference Manual (140-0914).

Compatibility with the APOGEE Automation System

The PXC Compact Series in P2 Mode is fully compatible with and will communicate

with all the APOGEE or pre-APOGEE products in your facility. However, PXC Compact

Series in P1 Mode is not designed for use on the FLN of a pre-APOGEE field panel.

CAUTION

When working on a network with multiple firmware revisions, always connect to the

operator interface at the field panel with the newest firmware revision. Otherwise, you

cannot view features in newer firmware revisions, or the field panel may coldstart.

Compact Series Product Overview

Compatibility with the APOGEE Automation System

| 100

Siemens Industry, Inc.

Technical Reference Manual

145-172

Building Technologies

Restricted

2018-09-25

BACnet Protocol Compatibility

APOGEE BACnet is compatible with the BACnet/IP protocol.

CAUTION

When sharing data values from APOGEE P2 (proprietary) field panels to BACnet

devices, the Cross-Trunk Service does not support requests originating from BACnet

devices to access points (objects) that reside in APOGEE P2 field panels.

If you plan to share data values from APOGEE P2 field panels with BACnet devices

(field panels), you must do one of the following:

●Install and enable the Insight BACnet Server Option.

●Use PPCL in the APOGEE P2 field panels to command values in the BACnet

devices through the Insight Cross-Trunk service.

APOGEE P2 and BACnet Product Features Order of Implementation

The APOGEE field panel firmware supports the BACnet protocol as follows:

●If both the BACnet and APOGEE protocols have a function, the BACnet function is

implemented.

●If APOGEE provides a function that the BACnet protocol does not support, the

APOGEE function is retained.

This approach to BACnet implementation retains the APOGEE feature set while

providing compatibility with standard BACnet/IP protocol.

TCP/IP Protocol Compatibility

PXC Compact Series controllers with BACnet/IP or Ethernet TCP/IP (P2) ALN provide

the following:

●100% compatibility with the TCP/IP protocol suite.

●Support of Dynamic Host Configuration Protocol (DHCP) and Domain Name

Servers (DNS).

●Support and auto detection of 10Base-T and 100Base-TX Ethernet.

Required IP Addresses

APOGEE BACnet/IP or Ethernet TCP/IP (P2) ALN uses:

●One IP address per device (field panel or workstation).

●One additional shared IP address per ALN for the multicast group (when using

multicast optimization).

Device Registration

Devices register with the DHCP server and Domain Name Server, if either is present.

Address Assignment

IP addresses are dynamically assigned by the DHCP server.

Compact Series Product Overview

System Program

9 |

100

Siemens Industry, Inc.

Technical Reference Manual

145-172

Building Technologies

Restricted

2018-09-25

If an address changes or is not recognized, the field panel firmware lets you release

the dynamically assigned IP address and then reconnect the field panel to the DHCP

server, accepting a new IP address assignment in the process.

If there is no DHCP server at the site, you must manually assign static IP addresses as

part of the startup system configuration.

Physical Addressing

Each device on the BACnet/IP or Ethernet TCP/IP (P2) ALN has a hard-wired MAC

address, which is printed on the product label.

Port Numbers

The default TCP/IP port number for APOGEE BACnet/IP or Ethernet TCP/IP (P2) ALN

communications is 5033. You can change the TCP/IP port number if necessary.

NOTE:

All devices on the network must use the same TCP/IP port number.

The default TCP/IP port number for Virtual AEM communications is 3001.

You must specify a UDP port number when using multicast optimization. The default

UDP port number is 8.

Network Bandwidth

BACnet/IP or Ethernet TCP/IP (P2) ALN does not add significantly to your network

overhead. Burst conditions for this product occur during:

●Database downloading after coldstart.

●Database uploading.

●Trend data uploading.

●Burst of alarms or COVs.

Data Exchange

BACnet/IP or Ethernet TCP/IP (P2) ALN sends and receives APOGEE data in TCP/IP

packets.

BACnet/IP or Ethernet TCP/IP (P2) ALN synchronizes global data between all devices.

Each device runs a global data replication engine that communicates with peer devices

to:

●Exchange new and changed global data.

●Resolve conflicts when data does not match.

Device Naming Conventions

Field panel DNS node names are limited to 30 characters and cannot contain spaces.

Network Security

BACnet/IP or Ethernet TCP/IP (P2) ALN uses your intranet security within the firewall

and a username/password combination to restrict access outside the firewall. You can

use VLAN to improve internal security.

System Program

The PXC Compact contains a non-volatile system program called

firmware

, which can

be upgraded in the field. The firmware is stored in Flash ROM memory, which keeps it

Compact Series Product Overview

System Program

| 100

Siemens Industry, Inc.

Technical Reference Manual

145-172

Building Technologies

Restricted

2018-09-25

virtually immune to all forms of power fluctuations or failure, including battery failure.

For more information on Flash ROM memory, see Memory [➙ 21].

General functionality of the firmware includes:

●Executing control programs.

●Communicating between other field panels and the workstation.

●Monitoring points.

●Managing point-related information.

●Keeping track of real time (both clock and calendar time).

●Executing self-test and error detection in the PXC Compact.

Minimum Firmware Revision Required

The APOGEE Field Panels Configuration and Sizing Guidelines (145-214) outlines the

minimum firmware revision required for support of a specific feature with the PXC

Compact Series.

License Manager

The licenses used to activate features are associated with a specific field panel

through the ID_STRING. The ID_STRING uniquely identifies a piece of hardware; it is

burned into the field panel’s EEPROM and read by software and firmware.

The ID_STRING is composed of the panel's part number, revision, year and week of

manufacture, and serial number. Therefore, a license for one field panel will not work

on another field panel. Information for the ID_STRING can be found:

●Printed on a label adhered to the outside of the field panel,

●Printed on a label adhered to the outside of the field panel shipping box, or

●Burned into the field panel’s non-volatile memory and read through Commissioning

Tool (CT), Insight software, or the field panel HMI.

For PXC-36 field panels that include FLN support, a default license named

FLNNode36_254 displays in the field panel configuration.

CAUTION

Licensed FLN support only works if the correct license is loaded on the field panel.

An FLN license for PXC-16 and PXC-24 field panels supports 32 FLN devices.

For field panels that include island bus support, a default license named TXIOExp_8

displays in the field panel configuration.

NOTICE

PXC Compact Series models with Island Bus support allow four TX-I/O modules.

See the APOGEE Field Panels Configuration and Sizing Guidelines (145-214) for more

information on applications and functionality that can be activated through License

Manager.

See the License to enable SNMP Agent on Siemens Modular or Compact hardware

with BACnet Firmware Revision 3.2.3

(LSM-SNMP) for information on adding licensed

applications or functionality.

This manual suits for next models

Table of contents

Other Siemens Control Unit manuals

Siemens

Siemens SIMATIC ET 200SP User manual

Siemens

Siemens SIMOTION D410 PN User manual

Siemens

Siemens SINAMICS G120 Administrator guide

Siemens

Siemens SINUMERIK 808D Quick start guide

Siemens

Siemens ECOFAST 3RK1911-4AB Series User manual

Siemens

Siemens SIMOTION Technical Document

Siemens

Siemens SITRANS LU SAM User manual

Siemens

Siemens CB15 User manual

Siemens

Siemens SIRIUS 3RW5 series User manual

Siemens

Siemens LGB21.130A17 User manual

Siemens

Siemens SIMATIC NET MM900 Series Administrator guide

Siemens

Siemens CP 1243-7 LTE User manual

Siemens

Siemens 3KC ATC3100 User manual

Siemens

Siemens SINUMERIK 840D Operating instructions

Siemens

Siemens FN2013-U1 User manual

Siemens

Siemens SINUMERIK 840D sl Owner's manual

Siemens

Siemens SIMATIC ET 200SP User manual

Siemens

Siemens SINAMICS G120 User manual

Siemens

Siemens NIM-1M User manual

Siemens

Siemens SIPROCESS GA700 User manual

Siemens

Siemens 3AH User manual

Siemens

Siemens SINUMERIK 840C User manual

Siemens

Siemens SIMATIC FM 351 User manual

Siemens

Siemens 550-818B User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual