Siemens FN2013-U1 User manual

FN2013-U1, FN2014-U1

Fiber network module (SM/MM)

Installation

Mounting

A6V12093642_en--_b Smart Infrastructure

2023-01-23

Legal notice

Technical specifications and availability subject to change without notice.

Transmittal, reproduction, dissemination and/or editing of this document as well as

utilization of its contents and communication thereof to others without express

authorization are prohibited. Offenders will be held liable for payment of damages. All

rights created by patent grant or registration of a utility model or design patent are

reserved.

Issued by:

Siemens Industry, Inc.

Smart Infrastructure

2 Gatehall Drive

Parsippany, NJ 07054

Tel. +1 973-593-2600

www.usa.siemens.com/fire

Edition: 2023-01-23

Document ID: A6V12093642_en--_b

Legal notice

2 | 28 2023-01-23 A6V12093642_en--_b

A6V12093642_en--_b 2023-01-23 3 | 28

Table of contents

1 Fiber network module FN2013/FN2014 .................................................... 5

1.1 Description ..................................................................................................... 5

1.2 Installation in Desigo/CerberusPRO Modular................................................. 5

1.3 Views.............................................................................................................. 7

1.4 Wiring ............................................................................................................. 8

1.4.1 Wiring for Desigo/Cerberus PRO Modular....................................... 8

1.4.2 Power supply sockets (4, 6)............................................................. 15

1.4.3 Sockets for HNET, XNET, HUB-4, SNC (7, 8)................................. 16

1.5 Indicators........................................................................................................ 17

1.6 Technical data ................................................................................................ 18

1.7 Appendix ........................................................................................................ 19

1.7.1 Applications for FN2013 and FN2014 modules ............................... 19

1.7.2 Integrating FN2013/FN2014 into existing D23xx networks.............. 22

2 FCC Statement.............................................................................................. 26

4 | 28 2023-01-23 A6V12093642_en--_b

Index of figures

Fig. 1 Mounting of fiber network module with COM-BRK in housing CAB-1/-2/-3 ............................................ 6

Fig. 2 Views of the fiber network module from above and the side................................................................... 7

Fig. 3 Class B, HNET/XNET wiring on NIC-C ................................................................................................... 9

Fig. 4 Class X, HNET/XNET wiring on NIC-C (two FN2013/FN2014 required) ................................................ 10

Fig. 5 Class B, RS485/HUB-4 FSI wiring .......................................................................................................... 11

Fig. 6 Class X, RS485/HUB-4 FSI wiring (two FN2013/FN2014 required) ....................................................... 12

Fig. 7 Class B wiring to an SNC (Desigo CC/Cerberus DMS/NCC) ................................................................. 13

Fig. 8 Class X wiring to an SNC (Desigo CC/Cerberus DMS/NCC) (two FN2013/FN2014 required)............... 14

Fig. 9 Connector power A (B)............................................................................................................................ 16

Fig. 10 Connector EF1/EF2, FCnet/C-WEB A1/B1 (A2/B2)................................................................................ 17

Fig. 11 Fiber-optic cascading (daisy chain)......................................................................................................... 20

Fig. 12 Star-shaped fiber-optic network .............................................................................................................. 21

Fig. 13 Fiber-optic bridge .................................................................................................................................... 22

Fig. 14 Adding a new panel in cascade .............................................................................................................. 23

Fig. 15 New panel in existing star-shaped network ............................................................................................ 24

1 Fiber network module FN2013/FN2014

1.1 Description

The fiber network module multi-mode (MM) and the fiber network module single-mode

(SM) can be used for the exclusive purpose of networking fire detection panels to the

HNET, XNET, SNC, or HUB-4 over large distances using fiber-optic cable.

The fiber network modules have the following features:

● Fiber network module(SM) FN2013: Single-mode transmission up to

131,000ft/40,000m

● Fiber network module(MM) FN2014: Multi-mode transmission up to

13,100ft/4,000m

● SC connections for fiber-optic cable

● Trouble signaling via LED

● Mounting in panel

1.2 Installation in Desigo/CerberusPRO Modular

In Desigo/Cerberus PRO Modular systems, the fiber network module is installed on a

COM-BRK bracket that can be mounted to the CAB-1, CAB-2 or CAB-3 back box or to

the optional CAB-MP.

The COM-BRK takes up the same space as a CC-2 card cage. The fiber network

module should first be secured to the COM-BRK using the three screws provided with

the module, then installed in the back box or mounting plate using the four screws

provided with the bracket.

Once the bracket and module are secured to the cabinet, wire the module and connect

the optical fiber cable as described later in this document.

Fiber network module FN2013/FN2014

Description

A6V12093642_en--_b 2023-01-23 5 | 28

NOTICE

The fiber network module and bracket cannot be installed behind a FCM2041-U2,

FCM2041-U3, LVM or FMT.

NOTICE

Only use the fiber network module in dry rooms.

Fig. 1: Mounting of fiber network module with COM-BRK in housing CAB-1/-2/-3

1 Fiber network module

2 COM-BRK mounting plate

Fiber network module FN2013/FN2014

Installation in Desigo/CerberusPRO Modular

6 | 28 2023-01-23 A6V12093642_en--_b

1.3 Views

Fail1

RX1

LNK1

EF1

LNK2

PowerA

Fail2

RX2

PowerB

Line 1

Line 2

EF2

8 37

2 3

Fig. 2: Views of the fiber network module from above and the side

1 Fiber-optic SC connection for circuit 1

2 Fiber-optic SC connection for circuit 2

3 10 LED indicators for data transmission, errors and power supply for both

channels

4 Power B socket, do not use

5 Fastening tab for housing mounting

6 Power A socket, power supply

7 A2/B2 socket for HNET, XNET, HUB-4, SNC

8 A1/B1 socket for HNET, XNET, HUB-4, SNC

Fiber network module FN2013/FN2014

Views

A6V12093642_en--_b 2023-01-23 7 | 28

1.4 Wiring

1.4.1 Wiring for Desigo/Cerberus PRO Modular

● In Desigo/Cerberus PRO Modular systems, 'Power B' connections to the fiber

module and monitoring of its trouble contacts are not required, as the fiber modules

must be installed in the same enclosure as the power supplies that provide power

to them.

● Power A' inputs can only be supplied by UL864/ULC-S527 approved regulated

power sources.

– PSC-12 / PSC-12M (TB3) or PSX-12 / PSX-12M (TB3)

– UL/ULC LISTED REGULATED DC24V POWER SUPPLY (POWER LIMITED)

To ensure compatibility with the NIC-C, the HUB-4, or the SNC, connect the polarity

of the circuit exactly as shown.

The fiber network module FN2013/FN2014 does not feature ground fault supervision.

For connections via HNET/XNET, ground fault supervision is via the NIC-C.

Use only EF1 or EF2. EF1 and EF2 are interconnected internally. EF1 has an internal

120 Ω terminating resistor; EF2 does not have a terminating resistor. The right

selection of EF1 or EF2 depends on the application. You will find information about

selecting EF1 or EF2 in the following graphics in this section and in the graphics in

section 'Appendix [➙19]'.

Fiber network module FN2013/FN2014

Wiring

8 | 28 2023-01-23 A6V12093642_en--_b

Wiring class B HNET/XNET on NIC-C

1 2 3 4 5 6 7 8

ONE SLOT OF CC-5/CC-2

NIC-C

NC EF1

NC EF2

Power A Power B

Line 1

Line 2

SIEMENS

FN2013 / FN2014

NC NC NC NC NC NC NC

9 10 11 12 13 14 15 16

17 18 19 20 21 22 23 24

DC 24 V

[1]

[2]

Fig. 3: Class B, HNET/XNET wiring on NIC-C

Pin Designation Description

NIC-C/1 - NIC-C,RS48 circuit 1 -, monitored by NIC-C 1

NIC-C/2 + NIC-C, RS48 circuit 1 +, monitored by NIC-C 1

NIC-C/3-24 NC NIC-C, do not use

EF1/A1 + Fiber network module, RS485 circuit 1 +

EF1/B1 - Fiber network module, RS485 circuit 1 -

Power A/+ + Fiber network module, + DC24V 2

Power A/- - Fiber network module, GND 2

Power B NC Fiber network module, do not use

1 RS485 ratings:

- 8 V P-P, 150 mA max.,

- 2000 ft/610 m max

- 16 AWG max., 18 AWG min.,

- Positive or negative ground fault supervision at < 10 kΩ

2 Only connect to a UL864/ULC-S527 approved, power-limited, and regulated power

unit, e.g., PSC-12 / PSC-12M (TB3).

No EOL resistor required on NIC-C or fiber network module.

Fiber network module FN2013/FN2014

Wiring

A6V12093642_en--_b 2023-01-23 9 | 28

Wiring class X HNET/XNET on NIC-C

1 2 3 4 5 6 7 8

ONE SLOT OF CC-5/CC-2

NIC-C

NC EF1

NC EF2

Power A Power B

Line 1

Line 2

SIEMENS

FN2013 / FN2014

NC NC NC NC NC NC NC

9 10 11 12 13 14 15 16

17 18 19 20 21 22 23 24

NC EF1

NC EF2

Power A Power B

Line 1

Line 2

SIEMENS

FN2013 / FN2014

NC NC NC NC NC NC NC

DC 42 V

[1]

[2]

Fig. 4: Class X, HNET/XNET wiring on NIC-C (two FN2013/FN2014 required)

Pin Designation Description

NIC-C/1 - NIC-C, circuit 1A -, monitored by NIC-C 1

NIC-C/2 + NIC-C, circuit 1A +, monitored by NIC-C 1

NIC-C/3-4 NC NIC-C, do not use

NIC-C/5 - NIC-C, circuit 1B -, monitored by NIC-C 1

NIC-C/6 + NIC-C, circuit 1B +, monitored by NIC-C 1

EF1/A1 + Fiber network module, circuit 1A +/circuit 1B +

EF1/B1 - Fiber network module, circuit 1A -/circuit 1B -

Power A/+ + Fiber network module, + DC24V 2

Power A/- - Fiber network module, GND 2

Power B NC Fiber network module, do not use

1 RS485 ratings:

- 8 V P-P, 150 mA max.,

- 2000 ft/610 m max

- 16 AWG max., 18 AWG min.,

- Positive or negative ground fault supervision at < 10 kΩ

Fiber network module FN2013/FN2014

Wiring

10 | 28 2023-01-23 A6V12093642_en--_b

This manual suits for next models

Table of contents

Other Siemens Control Unit manuals

Siemens

Siemens CP-8000 User manual

Siemens

Siemens LOGO! CIM User manual

Siemens

Siemens SITRANS F M MAGFLO series User manual

Siemens

Siemens Cm-lon 6BK1700-0BA10-0AA00 User manual

Siemens

Siemens FN2006-U1 Guide

Siemens

Siemens RUGGEDCOM ROS User manual

Siemens

Siemens AP 641 Service manual

Siemens

Siemens multiranger 200 User guide

Siemens

Siemens SINAMICS G120 Administrator guide

Siemens

Siemens SINUMERIK 828D Turning User manual

Siemens

Siemens V-2030 User manual

Siemens

Siemens SIRIUS 3SB3 User manual

Siemens

Siemens SENTRON ATC6500 User manual

Siemens

Siemens FCA2018-U1 User manual

Siemens

Siemens SIMATIC S7 User manual

Siemens

Siemens SINUMERIK 840D sl User manual

Siemens

Siemens MOD-16 User manual

Siemens

Siemens LMV51 Series Operator's manual

Siemens

Siemens WFZ43 User manual

Siemens

Siemens SIRIUS ACT 3SU1400-2EM10-6AA0 User manual

Siemens

Siemens CLM Series Guide

Siemens

Siemens SINAMICS G130 Datasheet

Siemens

Siemens SIMATIC 6ES7135-4MB02-0AB0 User manual

Siemens

Siemens SINAMICS G110M User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual