Sherwood RD-6504 User manual
• Be sure to connect speakers firmly
and correctly according to the chan-
nel (left and right) and the polarity (+
and -). If the connections are faulty,
no sound will be heard from the
speakers, and if the polarity of the
speaker connection is incorrect, the
sound will be unnatural and lack
bass.
■Caution
• Be sure to use the speakers with
the impedance of 6 ohms or above.
• Do not let the bare speaker wires
touch each other or any metal part
of this unit. This could damage this
unit and/or the speakers.
• Never touch the speaker terminals
while the AC input cord is connect-
ed to the wall AC outlet. Doing so
could result in electric shocks.
Placi g Speakers
QUICK START GUIDE
1
Co ecti g Speakers
■If you have 5.1 ch speakers
1. Front Left
2. Front Right
3. Center
4. Surround Left
5. Surround Right
6. Subwoofer
•This guide shows you how to connect your speakers and DVD player and enjoy multi-channel surround sound.
•For full details on using this unit, refer to the main operating instructions.
•Please be certain that this unit is unplugged from the AC outlet before making any connections.
RD-6504(AG)-Quick:RD-6504(AG)-Quick 2009-02-12 오 9:11 페이지 2
Co ecti g TV & DVD Player
QUICK START GUIDE
2
• There are two types of video jacks (CO PONENT,(composite) VIDEO) for analog video connections and the HD I
connector for digital video and audio connections.
Connect them to the corresponding video jacks according to their capability.
• For your reference, the exellence in picture quality is as follows : "HD I" > "CO PONENT" > "(composite) VIDEO".
• When making CO PONENT VIDEO connections, connect "Y" to "Y", "PB/CB" to "CB" (or "B-Y", "PB") and "PR/CR"
to "CR" (or "R-Y", "PR").
■Connecting a TV
• Connect the TV to the same type of onitor video output that you did connect to the DVD player, as shown.
■Connecting a DVD Player
• Use a Component, S-video or (composite) video cable to connect this unit's VIDEO 2 to the corresponding video
output on your DVD player, as shown.
• Use an Optical or Coaxial cable to connect this unit's OPTICAL IN or COAX IN 2 to the optical output or the coaxial
output on your DVD player. (You don't need to do both.)
• Use an Audio (analog) cable to connect this unit's VIDEO 2 (L/R) to audio output on your DVD player.
• Use a HD I cable to connect this unit's HD I 2 to HD I output on your DVD player.
RD-6504(AG)-Quick:RD-6504(AG)-Quick 2009-02-12 오 9:11 페이지 3
Tur i g o the U it
Playi g a DVD Player (VIDEO 2)
QUICK START GUIDE
3
1. Connect the AC input cord.
2. Press the [POWER] switch on the front panel to enter the standby mode.
3. In the standby mode, press the [ON/STANDBY] button on the front panel or [POWER ON] button on the
remote control to enter the operating mode.
4. Press the [SPEAKER] button to switch the speakers on.
Then the SPEAKER indicator lights up and the sound can be heard from the speakers.
6
6
1. Turn on your DVD player and TV.
2. Select the appropriate input on your TV.
3. Press the [VIDEO] button on the front panel to select [VIDEO 2] input source.
On the remote control, press the [VIDEO 2] button directly.
4. Press the [D/A ODE] button to select the digital input ([o(optical)], [c2(coaxial 2)] or [H(HD I audio)]) or the
analog input ([A(analog)]). When the selected digital input is not connected, the [DIGITAL] indicator flickers and
the analog input is automatically selected.
5. Start playback on your DVD player.
6. Adjust the volume.
RD-6504(AG)-Quick:RD-6504(AG)-Quick 2009-02-12 오 9:11 페이지 4
E joyi g Surrou d Sou d
4
■Whe CD or VIDEO 1 ~ 2 is selected as a i put source
1. Depending on how to select a surround mode, press the [SURROUND] button to select the auto surround mode
or the manual surround mode.
Auto Surround ode : The optimum surround mode will be automatically selected depending on the signal format
being input.
anual Surround ode : You can select the desired of different surround modes selectable for the signal being
input with using the [ ULTI CONTROL] knob or the [SURROUND </>] buttons.
■Note :
• When the input source other than CD and VIDEO 1 ~ 2 is selected, you cannot select the auto surround mode and
can select the surround mode as desired (the manual surround mode).
■Whe selecti g the ma ual surrou d mode.
2. Rotate the [ ULTI CONTROL] knob or press the [SURROUND </>] buttons to select the desired surround mode.
• Then the surround mode changes depending on the input signal format.
■To ca cel the surrou d mode for stereo operatio .
3. Press the [STEREO] button.
• Then either the stereo mode or the 2 CH downmix mode is selected depending on the signal format which is
being input.
• To cancel either the stereo mode or the 2 CH downmix mode, rotate the [ ULTI CONTROL] knob or press the
[SURROUND </>] buttons to select the surround mode.
■Note :
• You should adjust the speaker settings for the optimum sound acoustics according to your environment and
speaker layout. (For details, refer to "SETTING THE SPEAKER SETUP" on the main operating instructions.)
QUICK START GUIDE
([AUTO]) lights up)
([AUTO]) goes off)
5227-00000-086-0S
RD-6504(AG)-Quick:RD-6504(AG)-Quick 2009-02-12 오 9:11 페이지 1
Other manuals for RD-6504
4
This manual suits for next models
2
Table of contents
Other Sherwood Receiver manuals
Sherwood
Sherwood RVD-6090R User manual
Sherwood
Sherwood RD-5405 User manual
Sherwood
Sherwood NetBoxx R-904N User manual
Sherwood
Sherwood Newcastle R-871 User manual
Sherwood
Sherwood RD-7108 User manual
Sherwood
Sherwood RD-6506 User manual
Sherwood
Sherwood R-807 User manual
Sherwood
Sherwood Newcastle R-965 User manual
Sherwood
Sherwood RD-6505 User manual
Sherwood
Sherwood RD-606i User manual
Sherwood
Sherwood R-765 User manual
Sherwood
Sherwood RD-7106 User manual
Sherwood
Sherwood NewCastle R-772 User manual
Sherwood
Sherwood Newcastle R-956 User manual
Sherwood
Sherwood Newcastle R-925 User manual
Sherwood
Sherwood RVD-6090R User manual
Sherwood
Sherwood RD-6500 User manual
Sherwood
Sherwood RD-6513 User manual
Sherwood
Sherwood NewCastle R-945 User manual
Sherwood
Sherwood NetBoxx R-904N User manual
