SB Acoustics Arya Kit User manual
SB
Arya | User Manual
1 Arya | User Manual
Technical Specications:
Frequency range : 44-28000 Hz +/-3 dB
Sensitivity (2.83V / 1m) : 87.5 dB
Nominal impedance : 4Ω
Max SPL : 107 dB
Recommended amplier : 50-200W
Cross-over frequency
: 3000 Hz
Speaker type : 2½-way Floor Stand
Enclosure type : Bass reex
:
Port tuning frequency 41 Hz
Drive Units:
- High frequency driver : SB29RDAC-C000-4
- Low frequency drivers : 2 x 6” SB17MFC35-8
Cabinet:
18 mm MDF
Dimensions (H x W x D) : 1076 x 195 x 310 mm / 42.36 x 7.68 x 12.2 inch
Net Weight (pair):
- Cabinet only : 18.73 kg / 41.29 lb
- Full assembly : 22.54 kg / 49.69 lb
Special Features:
- High quality drivers.
- Diffraction optimized cabinet proportions.
- Internal bracing to reduce and distribute cabinet vibrations.
- Dual vents and slanted internal bottom plate for reduction of standing
wave resonances.
Arya | User Manual 2
100
95
90
85
80
75
70
65
60
55
50
45
40
40.0
36.7
33.3
30.0
26.7
23.3
20.0
16.7
13.3
10.0
6.7
3.3
0.0
dB
Ohm
20 20 50 100 200 500 1k 2k 5k 10k 20kHz
Frequency Response
Response Curve :
(Blue) : on axis ( Green ) : 15° off-axis ( Red ) : 30° off-axis------ ------ ------
Mechanical Drawing (dimensions in mm)
3 Arya | User Manual
Arya | User Manual 4
5 Arya | User Manual
SB29RDAC-C000-4 (Sold separately)
Arya | User Manual 6
Damping Material Cut Pattern (dimensions in mm)
7 Arya | User Manual
Damping Material Position (dimensions in mm)
Arya | User Manual 8
Crossover Schematic
R1
C1
C2
C3
L1
L3
R2
IN 1
2.2 Ω /10 W
33 Ω /10 W
0.15 mH / Ø0.7 mm
0.47 mH / Ø1.2 mm
6.8 µF / MKP
6.8 µF / MKP
Yellow
Tweeter
SB29RDAC-C000-4
SB17MFC35-8
SB17MFC35-8
Black
Black
Black
12 µF / MKP
1
2
Red
Black
L2
L4
1 mH / Ø1.4 mm
3.3 mH / Ø1.2 mm
Yellow
Blue
Red
Mid woofer
Low woofer
9 Arya | User Manual
Part List (each cabinet):
- High frequency driver SB29RDAC-C000-4 (sold separately) ............
- Low frequency driver 6” SB17MFC35-8 (sold separately) ...............
- Arya crossover kit (sold separately) ...............................................
- Hex socket screw M4 x 20mm (for drivers) ....................................
- Hex socket screw M4 x 30mm (for pedestal) .................................
- Countersunk screw M4 x 20mm (for terminal plate) .....................
- Wood screw 4 x 16 mm for crossover (from crossover kit) ............
- Insert nut M4 (Installed on cabinet) ..............................................
- Stainless Terminal plate .................................................................
- Binding post .................................................................................
- Seal gasket (for terminal plate) .....................................................
- Seal gasket (for pedestal, installed on cabinet) .............................
- Port are (installed on cabinet) .....................................................
- Port paper tube (installed on cabinet) ...........................................
- Damping .......................................................................................
- Name plate ...................................................................................
- Speaker grill e ..................................................................................
Tools Needed:
- Hex key 3mm size (for driver and pedestal screw).
- Hex key 2.5mm size (for terminal plate screw).
- Philips screwdriver no. 2 (for crossover screw).
- Multipurpose glue (for attaching the damping and sealing the wire hole).
1 pc
2 pcs
1 pc
12 pcs
10 pcs
4 pcs
6 pcs
26 pcs
1 pc
1 pair
1 pc
1 pc
2 pcs
2 pcs
1 pc
1pc
1 pc
Other manuals for Arya Kit
1
Other SB Acoustics Stereo System manuals
