SATO Argox D4-250 User manual
D4 Series
User Manual
i
FCC ID
In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
FCC Warning
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy, and if
not installed and used in accordance with the instructions in this manual, it
may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense.
FCC Statement for Optional RF module
This device complies with RF radiation exposure limits set forth for an
uncontrolled environment.
The antenna used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all people and must not be
collocated or operating in conjunction with any other antenna or
transmitter.
D4 Series
User Manual
ii
Bluetooth/Wireless LAN Communication
Compliance Statement
This product has been certified for compliance with the relevant radio
interference regulations of your country or region. To make sure continued
compliance, do not:
∙Disassemble or modify this product.
∙Remove the certificate label (serial number seal) affixed to this product.
Use of this product near microwave and/or other Wireless LAN LAN
equipment, or where static electricity or radio interference is present, may
shorten the communication distance, or even disable communication.
WARNING
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
(for USA only)
D4 Series
User Manual
iii
Liability Disclaimer
ARGOX Corporation takes steps to assure that the company’s published
engineering specifications and manuals are correct; however, errors do
occur. ARGOX reserves the right to correct any such errors and disclaims any
resulting liability. In no event shall ARGOX or anyone else involved in the
creation, production, or delivery of the accompanying product (including
hardware and software) be liable for any damages whatsoever (including,
without limitation, damages for loss of business profits, business
interruption, loss of business information, or other pecuniary loss) arising
out of the use of or the results of use of or inability to use such product,
even if ARGOX has been advised of the possibility of such damages.
Caution
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
D4 Series
User Manual
iv
Contents
1 Introduction.........................................................................................................2
1.1 Features ....................................................................................................2
1.2 Unpacking.................................................................................................2
1.3 Understand your printer ...........................................................................3
1.3.1 Perspective view...........................................................................3
1.3.2 Back view .....................................................................................4
1.3.3 Interior view.................................................................................5
1.4 Printer lights..............................................................................................6
1.4.1 Status lights..................................................................................6
1.4.2 System mode................................................................................9
2 Get started.........................................................................................................10
2.1 Attach the power cord ............................................................................10
2.2 Turn on/off your printer..........................................................................11
2.2.1 Turn on your printer...................................................................11
2.2.2 Turn off your printer...................................................................12
2.3 Load media .............................................................................................13
2.3.1 Prepare media............................................................................13
2.3.2 Place a media roll .......................................................................14
2.3.3 Test media feed..........................................................................17
2.4 Media types ............................................................................................18
2.5 Media sensing.........................................................................................20
2.5.1 Transmissive sensor....................................................................20
2.5.2 Reflective sensor ........................................................................21
3 Printer operation ...............................................................................................22
3.1 Printing Media Calibration & Configuration ............................................22
3.2 Self test...................................................................................................23
3.3 Reset your printer ...................................................................................29
3.4 Communications .....................................................................................30
3.4.1 Interfaces and Requirements .....................................................30
3.5 Driver installation....................................................................................32
3.5.1 Installing a Plug and Play printer driver (for USB only) ...............33
3.5.2 Installing a Printer Driver (for other interfaces except USB) .......38
4 ConfigurationonWebSettingTool...........................................................................44
4.1 Attaching the power cord ............................................................................44
4.2 Connecting the printer to a LAN hub..................................................................44
4.3 Gettingthe IP address of theprinter ..................................................................45
D4 Series
User Manual
v
4.4 Logging in to the web setting tool................................................................45
5 Maintenance......................................................................................................47
5.1 Cleaning ..................................................................................................47
5.1.1 Printhead....................................................................................47
5.1.2 Media housing............................................................................48
5.1.3 Sensor ........................................................................................49
5.1.4 Platen roller................................................................................50
6 Troubleshooting.................................................................................................51
6.1 Printer issues...........................................................................................51
6.2 Media issues ...........................................................................................52
6.3 Other issues ............................................................................................53
7 Specifications.....................................................................................................54
7.1 Printer.....................................................................................................54
7.2 Media......................................................................................................56
7.3 Fonts, Barcodes, and Graphics Specification ...........................................57
7.4 Wireless LAN(Optional)...........................................................................60
7.5 Bluetooth (Optional)...............................................................................62
7.6 Ethernet..................................................................................................63
7.7 Electrical and operating environment .....................................................63
7.8 Physical dimension..................................................................................63
7.9 Interfaces ................................................................................................64
7.9.1 USB.............................................................................................64
7.9.2 Ethernet .....................................................................................65
7.9.3 RS-232C......................................................................................66
1 Introduction
2
1Introduction
Thank you for purchasing a ARGOX D4 printer. This manual provides
information about how to set up and operate your printer, load the media
and solve common problems.
1.1 Features
￭Various Connectivity Options USB, Ethernet, RS-232
￭Easy Operation One-button design for easy control
￭Fast Print Speed Max 6 inches/sec
￭Wireless LAN Connection Build a Wireless LAN printing environment
with Bluetooth
￭External Memory The extra USB port allows you to use a USB flash
drive for storage
1 Introduction
2
1.2 Unpacking
Make sure all of the following items are included in your package.
ARGOX D4 Printer
Quick Installation Guide
DVD
Power Supply
AC Power Cord
When you receive the printer, open the package immediately and inspect for
shipping damage. If you discover any damage, contact the shipping company
and file a claim. ARGOX is not responsible for any damage incurred during
shipping. Save all package materials for the shipping company to inspect.
Note If any item is missing, please contact your local dealer.
1 Introduction
3
1.3 Understand your printer
1.3.1 Perspective view
LED 2
LED 1
Feed Button
Cover Open Latch
1 Introduction
4
1.3.2 Back view
Caution The areas indicated by the ellipse have sharp edges. To avoid
injury, be careful not to touch them when handling the printer.
Caution To avoid injury, be careful not to trap your fingers in the Paper
Slot while opening or closing the Top Cover.
LAN
RS232
USB A
USB B
Power Jack
Power Switch
Paper Slot
This manual suits for next models
2
Table of contents
Other SATO Printer manuals
SATO
SATO ARGOX AME-3230W User manual
SATO
SATO M-8460Se Series User manual
SATO
SATO D508 User manual
SATO
SATO CX208 Operating instructions
SATO
SATO CX400 User manual
SATO
SATO M-8460Se Series User manual
SATO
SATO CG2 Series User manual
SATO
SATO MB400I User manual
SATO
SATO M-5900RVe Series User manual
SATO
SATO GL 4xxe Series Quick guide
SATO
SATO CL-408 User manual
SATO
SATO XL400 Use and care manual
SATO
SATO E series Operating instructions
SATO
SATO MB2i Series User manual
SATO
SATO CL-408 User manual
SATO
SATO CG208 DT/TT User manual
SATO
SATO LP 100R L User manual
SATO
SATO M-84Pro Series User manual
SATO
SATO CT 400 User manual
SATO
SATO CL408e User manual
