Sanus EFsat User manual

Sanus Systems 2221 Hwy 36 West, St Paul, MN 55113 USA • (6901-100012 <03>)

USA Customer Service 1-800-359-5520 • www.sanus.com

EFsat

Do not use this product for any purpose not explicitly speciﬁed by Sanus Systems.

Improper installation or use may cause personal injury and/or property damage. If

you do not understand these instructions, or if you have doubts about the safety of

the installation, contact Sanus Systems Customer Service. Sanus Systems is not liable

for injury or damage caused by incorrect installation or use.

CAUTION

This product contains small items that could be a choking hazard if swallowed.

Keep these items away from young children!

WARNING

Thank you for choosing the Sanus Systems EFsat speaker stand. The EFsat speaker stand is

designed to hold speakers weighing up to 4.5 kg (10 lbs). Hardware for multiple mounting

configurations is included.

OPT

Hardware and procedures for multiple mounting configurations are included.

When you see this symbol, choose the correct configuration to suit your

needs. Not all hardware will be used.

26901-100012 <03>

[10] x 2

[11] x 2

[12] x 2

[13] x 2 [14] x 2

[16] x 2

0.28 x 0.5 in.

[15] x 2

1/4-20 x 0.875 in.

[17] x 2

10-32 x 1.0 in.

[18] x 2

1/4-20 x 5/8 in.

[19] x 2

M6 x 16mm

[20] x 2

M5 x 12mm

[21] x 4

0.75 x 0.257 in.

[23] x 2

1/4-20

[07] x 8

1/4-20 x 1.5 in.

[22] x 2

[24] x 2 [25] x 2

[09] x 2

[04] x 6

1/4-20 x 1.50 in.

[01] x 2

[02] x 2

[03] x 2

1/4-20 x 0.625 in.

[08] x 6[06] x 2

1/4-20

[05] x 2

1/4-20 x 1.5 in.

Supplied Parts and Hardware

Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item

to your dealer; contact Sanus Systems Customer Service at 1-800-359-5520. Never use damaged parts!

[26] x 1

3/16 in.

[27] x 1

1/8 in.

6901-100012 <03>

1: Assemble Base

1/4-20 x 1.50 in.

[04]

[07]

[02]

OPT

001411.eps

EFsat - Base Not Level on Spikes

001411.eps

EFsat - Base Not Level on Spikes

000272.eps

Rubber feet

[08]

[02]

001420.eps

Arrows

001420.eps

Arrows

001420.eps

Arrows

46901-100012 <03>

3: Assemble Pillar to Base

2: Expand Pillar

[03] [01]

001413.eps

Back View No Speaker

001413.eps

Back View No Speaker

[09]

001413.eps

Back View No Speaker

[02]

[01]

[06]

[05]

001413.eps

Back View No Speaker

001413.eps

Back View No Speaker

6901-100012 <03>

4: Choose Speaker Mount

Double Threaded Insert on Back

OPT

[01]

[12]

[03]

[21]

[17], [18], [19],

[20], [21]

[01]

[03] [10],[11]

[25], [26]

OPT

No Threaded Insert or Threaded Insert on Bottom

[26]

[01]

[03] [10], [11]

[24], [25]

OPT

66901-100012 <03>

[01]

[03]

[13]

[19]

OPT

Screws from

Klipsch foot

[16]

[01]

[03]

[17], [18],

[19], [20],

[21]

[15]

OPT

Klipsch Quintet Mount

[26]

Single Threaded Insert on Back

[26]

6901-100012 <03>

[03]

[01]

[14]

Screws from

Klipsch foot

[07]

[22]

[01]

[23]

Klipsch RS Mount

[26]

Ball Mount

[27]

86901-100012 <03>

5: Adjust Height of Stand

CSAV, Inc. and its affiliated corporations and subsidiaries (collectively,“CSAV”), intend to make this manual accurate and complete. However, CSAV makes no claim that the information contained herein covers all details,

conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice

or obligation of any kind. CSAV makes no representation of warranty, expressed or implied, regarding the information contained herein. CSAV assumes no responsibility for accuracy, completeness or sufficiency of the

information contained in this document.