Sanus DLT1 User manual
DLT
1
INSTRUCTION MANUAL
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
1-888-333-9952. We’re ready to help!
Scan for easy install video
san.us/20
2
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
Before getting started, let’s make sure this mount is perfect for you! Para Español ver página 14
No
—
Perfect!
Yes
—
This mount is NOT compatible.
Visit decora.sanus.com or call 1-888-333-9952 to find a compatible mount.
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use
of this product, contact Customer Service at 1-888-333-9952.
Do you have
all the tools
needed?
1
2
3
4
What is your
wall made of?
130 lbs.
(58.9 kg)
Ready to begin?
Does your TV
(including accessories)
weigh more than
130 lbs. (58.9 kg)?
CAUTION:
DO NOT install
into drywall alone
Unsure?Drywall with
wood studs?
Solid concrete or
concrete block?
Call Customer Service: 1-888-333-9952 (UK: 0800-056-2853)
Perfect!
CAUTION: Avoid potential personal injuries and property damage!
●This product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone
●The wall must be capable of supporting five times the weight of the TV and mount combined
●Do not use this product for any purpose not explicitly specified by manufacturer
●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
Wood Stud Install
Concrete Install
Awl
Pencil Level Stud Finder
Screwdriver
Tape
Measure
7/32 in.
(5.5 mm)
Wood
Drill Bit
Electric
Drill Hammer
1/2 in.
(13 mm)
Socket
Wrench Drill Bit
3/8 in.
(10 mm)
Concrete
Concrete Installation Kit Required (not included)
3
6.5
165.2
16.9
430.0
25.0
635.0
28.1
712.5
15.9
405.0
3.9
99.4
UP TO
25.6
650.0
OFFSET
0.4
9.7
2.0
51.8
10°
5°
LEVELING
1.5°
Dimensions
in.
[mm]
4
TV Brackets
01 02
x1 x1
Parts and Hardware
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts
are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service.
Never use damaged parts!
Parts and Hardware for STEP 1
NOTE: Not all hardware included will be used.
M6 x 12mm
M8 x 16mm
M6 x 20mm
M8 x 20mm
M6 x 35mm
M8 x 35mm
03
04 06
05 07
08
09
x4
x4 x4
x4 x4
x4
TV Screws
10 x4
x4
M5 x 12mm M5 x 35mm
Washers
M5 M6/M8
11 12
x4 x4
Spacers
13 x4
5
Parts and Hardware for STEP 2
5⁄16 x2 3⁄4 in.
Lag Bolts
17 x4
Washers
16 x4
.695 x .350 x.075 in.
Contact Customer Service at 1-888-333-9952 to have these
additional pieces shipped directly to you.
.695 x .350 x .075 in.
.695 x .350 x.075 in.
x4
Fischer UX 10 x 60R Anchor
x4
Concrete Installation Kit CMK1 (NOT INCLUDED)
5/16 x 2¾ in.
x4
5/16 x 2¾ in.
Wall Plate Template
x1
14
Wall Plate
15 x1
6
STEP 1 Attach Brackets to TV
M5 M6 M8
FLAT BACK ROUND BACK CABLESINSET HOLES
1.1 Select TV
Screw Diameter
1.2 Select TV
Screw Length
Hand thread screws into the threaded inserts
on the back of your TV to determine which
screw diameter (M5, M6, or M8) to use.
ab
If your TV has a flat back AND you want your TV closer to
the wall, use the shorter screws (a).
Use the spacers and longer screws (b) to accommodate:
• Round/irregular back TVs
• TVs with inset mounting holes
• Extra space needed for cables
Too Short
Too Long
CAUTION:
Verify adequate thread
engagement with the screw or
screw/spacer combination.
-Too short will not hold the TV.
-Too long will damage the TV.
Correct
Standard configurations
are shown. For special
applications, or if you
are uncertain about your
hardware selection,
contact Customer Service
at 1-888-333-9952.
7
1.3 Attach TV Brackets
Ensure that your TV brackets are level on the back of the TV. Standard configurations are shown.
Secure TV brackets using your short screw/washer (a| Flat Back) or long screw/washer/spacer (b| Round Back / Extra Space) selection.
IMPORTANT: Ensure TV brackets are securely fastened before moving on to the next step.
aFlat Back
bRound Back / Extra Space
13
03 04 05 06 07
11
11
12
12
08 09 10
01
02
8
STEP 2A Attach Wall Plate to Wall Wood Stud Option
CAUTION: Avoid potential personal injuries and property damage!
• Drywall covering the wall must not exceed 5/8 in. (16 mm)
• Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
• Minimum horizontal space between fasteners: 16 in. (406 mm)
1. Locate your studs. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.
2. Position the wall plate template 14 at your desired height and line up the holes with your stud center line. Level the template and tape in place.
12
Min. 16 in.
(406 mm)
Max. 5/8 in.
(16 mm) 14
9
4
3
15
17 16
14
3. Drill pilot holes using a 7/32 in. (5 mm) diameter drill bit. Remove wall plate template 14 .
IMPORTANT: Be sure to drill into the center of the studs.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm).
4. Install wall plate assembly 15 using four lag bolts 17 and four washers 16 . Tighten the lag bolts only until they are pulled firmly against the
wall plate.
CAUTION: Avoid potential personal injury or property damage! All four lag bolts MUST BE firmly tightened to prevent unwanted movement
of the wall plate 15 .Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
3 in. (75 mm)
7/32 in.
(5.5 mm)
10
STEP 2B Attach Wall Plate to Wall Solid Concrete or Concrete Block Option
CAUTION: Avoid potential personal injuries and property damage!
• Mount the wall plate 15 directly onto the concrete surface
• Minimum solid concrete thickness: 8 in. (203 mm)
• Minimum concrete block size: 8 x 8x 16 in. (203 x 203 x 406 mm)
• Minimum horizontal space between fasteners: 16 in. (406 mm)
1. Position the wall plate template 14 on the wall at your desired height. Level the wall plate template and mark the hole locations.
2. Drill four pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Never drill into the mortar between blocks.
21
Concrete Installation Kit CMK1 is not included
(see page 5) Contact Customer Service
at 1-888-333-9952 to have the additional
hardware shipped directly to you.
Min.
16 in.
(406 mm)
14 14
3/8 in.
(10 mm)
3 in. (75 mm)
Table of contents
Languages:
Other Sanus Rack & Stand manuals
Sanus
Sanus VisionMount VMF220 User manual
Sanus
Sanus VLF525 User manual
Sanus
Sanus SSASB2 User manual
Sanus
Sanus WMS3 User manual
Sanus
Sanus HTB4B User manual
Sanus
Sanus WMS2 User manual
Sanus
Sanus AMAZON ECHO SHOW 5 User manual
Sanus
Sanus VLT35-B1 User manual
Sanus
Sanus Secura QML12 User manual
Sanus
Sanus VisionMount LF228 User manual
Sanus
Sanus EFsat User manual
Sanus
Sanus VTM27 Installation instructions
Sanus
Sanus Classic MST15 User manual
Sanus
Sanus BSTV2 User manual
Sanus
Sanus FSF110 User manual
Sanus
Sanus 6901-170053 User manual
Sanus
Sanus HTB7 User manual
Sanus
Sanus CFR21 Series User manual
Sanus
Sanus CFR518RR User manual
Sanus
Sanus VMA301 User manual
Popular Rack & Stand manuals by other brands
Salamander
Salamander Acadia AC/W/L400/WH Assembly instructions
Fohhn
Fohhn VAT-09 Mounting instruction
ricoo
ricoo FS0522 quick start guide
AMSOIL
AMSOIL BMK-22 Installation and service instructions
Kargo Master
Kargo Master 48220 installation guide
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 installation instructions
