Samsung SPP-R200 Instruction manual
Bluetooth Connection Manual
SPP-R200
Mobile Printer
Rev. 1.00
http://www.samsungminiprinters.com
Rev. 1.00 - 2 -
SPP-R200
Table of Contents
1. Manual Information...................................................................................................... 3
2. Precautions ..................................................................................................................3
3. General Sequence for Bluetooth Connections ......................................................... 3
4. Bluetooth Connection Instructions............................................................................ 4
4-1 Connecting with an Intermec PDA (Device: CN2B, OS: Pocket PC 4.20.0) ............. 5
4-2 Connecting with a SYMBOL PDA
(Device: SYMBOL MC70, OS: Windows Mobile 5.0)
........... 9
4-3 Connecting with an HP PDA
(Device: iPAQ hx2700, OS: Windows Mobile 5.1.1702)
.... 14
4-4 Connecting with a Mobile Compia PDA (Device: M3, OS: WinCE 5.0)................... 18
4-5 Connecting with an InnoTeletek PDA (Device: MC3000, OS: WinCE 4.2) ............. 22
4-6 Connecting with Bluetooth Dongle (BlueSoleil IVT Stack) ...................................... 26
Rev. 1.00 - 3 -
SPP-R200
1. Manual Information
This Bluetooth Connection Manual provides information on the connection of Bluetooth-
enabled devices (PDAs, PCs, etc.) with the printer (SPP-R200).
2. Precautions
2-1 To connect the printer with another device via Bluetooth, the devices must be within
10m of one another. The connection is broken if the distance between devices
exceeds 10m.
2-2 The maximum separating distance may be shortened if transmission obstacles, such
as cement walls, are present.
2-3 If a device (such as a microwave oven, wireless LAN, etc.) that uses the same
frequency is present, transmission may be interrupted. Separate the printer and
Bluetooth-enabled device from such interrupting devices by a distance of at least 5m.
3. General Sequence for Bluetooth Connections
Bluetooth connection methods vary by device. The following is the general sequence for
Bluetooth connections, provided for reference purposes.
3-1 Turn on power of each device
- PDAs, PCs (Bluetooth Dongle), printers, etc.
3-2 Run a Bluetooth connection program on the PDA or PC.
3-3 Search for the peripheral with which to establish the connection.
- Search for the printer.
3-4 Register this Printer (SPP-R200) from the search results.
- If a security setting is enabled, register after entering the PIN Code.
(PIN Code=Pass Key: password of the Bluetooth device)
3-5 Test the connection.
- When connected, confirm the designated COM port of fixed COM port and print.
Rev. 1.00 - 4 -
SPP-R200
4. Bluetooth Connection Instructions
This manual focuses on the use of the following devices.
Please use this manual as a guide when using devices other than those listed here.
- Intermec PDA (Device: CN2B, OS: Pocket PC 4.20.0)
- SYMBOL PDA (Device: SYMBOL MC70, OS: Windows Mobile 5.0)
- HP PDA (Device: iPAQ hx2700, OS: Windows Mobile 5.1.1702)
- Mobile Compia PDA (Device: M3, OS: WinCE 5.0)
- InnoTeletek PDA (Device: MC3000, OS: WinCE 4.2)
- Bluetooth Dongle (BlueSoleil IVT Stack)
After turning on the power of all Bluetooth devices, perform the connection process.
- PDAs, PCs (Bluetooth Dongle), printers (SPP-R200), etc.
Rev. 1.00 - 5 -
SPP-R200
4-1 Connecting with an Intermec PDA (Device: CN2B, OS: Pocket PC 4.20.0)
1)Clickthe icon. 2)Click“Settings”.
3) Click “Connections”. 4) Click the “Bluetooth” icon.
Rev. 1.00 - 6 -
SPP-R200
5) Click to check the “On” option. 6) Click the “Wireless Printing” menu bar
7) Click the ”Device Discovery” button. 8) Select Devices of the SPP-R200,
and click the “Connect” button.
Rev. 1.00 - 7 -
SPP-R200
9) Select the COM port to be used. 10) Check the “Enable Wireless Printing”
and ”Default” checkboxes, and click the
“Printer Test Page” button.
11) Click the “OK” button. 12) The PIN Code(Device PIN)
window appears (if the SPP-R200
security function is enabled).
Rev. 1.00 - 8 -
SPP-R200
13) Input the PIN Code(Device PIN) 14) If after pressing the “Print Test Page” button,
and click “Enter”. (Default code: 0000) the BT LED of the SPP-R200 turns on and
test printing is performed, the connection is
complete.
Rev. 1.00 - 9 -
SPP-R200
4-2 Connecting with a SYMBOL PDA
(Device: SYMBOL MC70, OS: Windows Mobile 5.0)
1) Click the icon. 2) Click ”Enable Bluetooth”.
3)Clickthe icon. 4)Click“ShowBTExplorer”’.
Rev. 1.00 - 10 -
SPP-R200
5)Click”File”. 6)Click“NewConnection”.
7) Click ”Associate Serial Port”. 8) Click the “Next” button.
Other manuals for SPP-R200
1
Table of contents
Other Samsung Printer manuals
Samsung
Samsung ML--6100 User manual
Samsung
Samsung ML-6512ND SERIES User manual
Samsung
Samsung STP-102S User manual
Samsung
Samsung ML-1200 Series User manual
Samsung
Samsung SCX-6122FN User manual
Samsung
Samsung ML-1210 User manual
Samsung
Samsung ML-2525W series User manual
Samsung
Samsung ML-7300 Series User manual
Samsung
Samsung ProXpress C262x Series User manual
Samsung
Samsung 2 COLOR THERMAL PRINTER SRP-275 User manual
Samsung
Samsung CLP-600 Series User manual
Samsung
Samsung Lazett ML-1250 User manual
Samsung
Samsung CLX-3305FW User guide
Samsung
Samsung ProXpress M453x series User manual
Samsung
Samsung ProXpress M4030 Series User manual
Samsung
Samsung ML-5050G Series User manual
Samsung
Samsung STP-103S User manual
Samsung
Samsung ML-1450 Series User manual
Samsung
Samsung ML 1710 - B/W Laser Printer User manual
Samsung
Samsung CLX-6260FD User guide
