Salus RT500 User manual

Other manuals for RT500

3

This manual suits for next models

1

Table of contents

Popular Thermostat manuals by other brands

EWELLY

EWELLY EW-181 manual

Prolon

Prolon T1100 Hardware guide

Computherm

Computherm Q20 operating instructions

Heatmiser

Heatmiser neoStat user manual

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA user manual

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat user manual

Saswell

Saswell SAS920XWHB-7-S-RF User manual and warranty card

Aircalo

Aircalo TFP1-ET85P2 operating manual

Honeywell

Honeywell CM721 user manual

Carrier

Carrier DEBONAIR 33CS Installation and operating instructions

Lennox

Lennox iHarmony Zone Thermostat Installation and setup guide

Gemtech

Gemtech GT7000 Operation

Rollei

Rollei Smartes 45000 manual

Sinope

Sinope TH1300RF user guide

Honeywell

Honeywell RLV4305 owner's guide

Honeywell

Honeywell Prestige 2.0 THX9421 manual

NuTone

NuTone NTBZ48 Installation & operation guide

Stelpro

Stelpro MAESTRO ASMT402AD user guide

To enable the Frost Protection mode, press FROST button for 3-4 seconds. Once Frost Protection is enabled,

the set point temperature is automatically set to 5°C to provide protection from the risk of freezing.

Whenever Frost Protection is activated, the Frost Protection indicator will ash.

To cancel, press FROST button again for 3-4 seconds.

STEP FIVE

AM

M T W T F

SET PROG

Press SELECT and program will move to the next program.

SELECT

STEP FOUR

AM

M T W T F

SET PROG

Press SELECT and temperature will ash.

Use up or down buttons to change temperature. OR

SELECT

STEP TWO

AM

M T W T F

SET PROG

Press SELECT key to select rst program.

Use up or down buttons to change hour.

MINUTES

DAY

Easy user guide

RT500/RT500RF

Programmable Room Thermostat

AND

OR

AM

M

SET

SET

SELECT

SELECT

OR

SELECT

SETTING THE TIME AND DAY

PROGRAMMING WEEKDAYS

Day and time are now set.

To set the clock press and hold the SELECT and SET buttons for 3/4 seconds.

Input correct hour using your up or down buttons, making sure it’s on the correct AM or PM.

Then press SELECT.

Use the up or down buttons to set the correct minutes.

Then press SELECT.

OR

Now you will see the day ashing. Use the up or down buttons to set the correct day.

Then press SELECT

and then SET.

AM

M

SET

SET

SELECT

NOTE: The RT500RF is time and temperature controlled.

When unit times out data will be saved to point of time out.

If the unit times out, data will be saved to that point.

STEP ONE

AM

M T W T F

SET PROG

OR

SELECT

Press SET and MT WT F will ash (Only in 5-2 day mode).

See manual for alternative mode settings.

PROGRAMMING WEEKEND

FROST PROTECTION

SLEEP MODE

STEP ONE

AM

SA SU

SET PROG

AM

M T W T F

To enter sleep mode hold the up and down buttons for 3 seconds.

The RT500 functions will be paused to save battery power. To wake the unit up, press any key.

After programming weekdays, press SET and then up arrow key SA SU will ash.Then press SELECT.

Repeat StepsTWO to FOUR as above.

STEP THREE

AM

M T W T F

SET PROG

Press SELECT and minutes will ash.

Use up or down buttons to change minutes. OR

SELECT

HOUR

AM

M

SET

SET

For more information please contact the SALUS technical team

Tel: 01226 323961

www

.salus-tech.com

AND

RedwellGB Heating Ltd

Seabraes House, 18 Greenmarket,

Dundee, DD1 4QB

Tel: 0330 0884 360

Web: www.redwellinfraredheating.com