ROSE DISPLAYS CABLE CLIP User manual

35 Congress Street, Salem, MA 01970

Tel# 1- 800 631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Parts

SuperSnap™ with Rod Connector

Step 1

Place cable into inner channel of

CableClip. The cable should

snap into place. Fig. 1

Align one end of the CableClip with

the top channel of the plastic holder.

Then insert one round end, press

down on the other round end and

slide CableClip into rail. Fig. 2

Note: Position CableClip about

halfway down each SuperSnap. Fig. 3

Step 2

Push rod halfway into clip rail

of one SuperSnap. Fig. 4

Step 3

Insert rod into top clip rail of second

SuperSnap until both holders meet.

Fig. 5 & 6 Repeat steps 2-3 for

additional SuperSnaps.

Instruction Sheet

Instructions for assembly

Incept-11.13.02

The SuperSnap™ is a trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss or

damage resulting from the use of these products.

Part #02INSSuperSnapRodCCSaucer

Figure 3

Figure 6

Figure 2Figure 1

Figure 5

Figure 4

Page 1 of 2

SuperSnap

12S300

Cable Clip

06-5050

End Caps

06-5475

6” Rod

97-0304-06

Cable and

Saucer

16-0018SS

35 Congress Street, Salem, MA 01970

Tel# 1- 800 631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Parts

(continued)

Step 4

Snap all sections of the SuperSnap

open. Fig. 7

Note: It is easier to open and close

the SuperSnap by starting at one

end and working your way down

the holder.

Step 5

Insert poster (top and bottom) into

all sections of SuperSnap. Fig. 8

Step 6

To close, snap the SuperSnap shut.

Fig. 9

Step 7

Push end caps into place. Fig. 10

Step 8

Suspend holders. Finished Look

Important note:

Please save and reuse the

SuperSnap, End Caps and

CableClips for future projects.

Instructions for assembly

Incept-11.13.02

The SuperSnap™ is a trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss or

damage resulting from the use of these products.

Part #02INSSuperSnapRodCCSaucer

SuperSnap™ with Rod Connector Instruction Sheet

Open all

holders

Finished Look

Page 2 of 2

Figure 10Figure 9

Figure 7 Figure 8

SuperSnap

12S300

Cable Clip

06-5050

End Caps

06-5475

6” Rod

97-0304-06

Cable and

Saucer

16-0018SS

Parts

SuperSnap™ with Rod Connector

Step 1

Place cable into inner channel of

CableClip. The cable should

snap into place. Fig. 1

Align one end of the CableClip with

the top channel of the plastic holder.

Then insert one round end, press

down on the other round end and

slide CableClip into rail. Fig. 2

Note: Position CableClip about

halfway down each SuperSnap. Fig. 3

Step 2

Push rod halfway into clip rail

of one SuperSnap. Fig. 4

Step 3

Insert rod into top clip rail of second

SuperSnap until both holders meet.

Fig. 5 & 6 Repeat steps 2-3 for

additional SuperSnaps.

Instruction Sheet

Instructions for assembly

Incept-11.13.02

The SuperSnap™ is a trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss or

damage resulting from the use of these products.

Part #02INSSuperSnapRodCCSaucer

Figure 3

Figure 6

Figure 2Figure 1

Figure 5

Figure 4

Page 1 of 2

SuperSnap

12S300

Cable Clip

06-5050

End Caps

06-5475

6” Rod

97-0304-06

Cable and

Saucer

16-0018SS

Parts

(continued)

Step 4

Snap all sections of the SuperSnap

open. Fig. 7

Note: It is easier to open and close

the SuperSnap by starting at one

end and working your way down

the holder.

Step 5

Insert poster (top and bottom) into

all sections of SuperSnap. Fig. 8

Step 6

To close, snap the SuperSnap shut.

Fig. 9

Step 7

Push end caps into place. Fig. 10

Step 8

Suspend holders. Finished Look

Important note:

Please save and reuse the

SuperSnap, End Caps and

CableClips for future projects.

Instructions for assembly

Incept-11.13.02

The SuperSnap™ is a trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss or

damage resulting from the use of these products.

Part #02INSSuperSnapRodCCSaucer

SuperSnap™ with Rod Connector Instruction Sheet

Open all

holders

Finished Look

Page 2 of 2

Figure 10Figure 9

Figure 7 Figure 8

SuperSnap

12S300

Cable Clip

06-5050

End Caps

06-5475

6” Rod

97-0304-06

Cable and

Saucer

16-0018SS

Other manuals for CABLE CLIP

This manual suits for next models

Table of contents

Other ROSE DISPLAYS Accessories manuals

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA WITH LOOP TO LOOP User manual

ROSE DISPLAYS

ROSE DISPLAYS SPIDER CEILING TRACK WITH ADHESIVE User manual

ROSE DISPLAYS

ROSE DISPLAYS ECONOFRAME WITH TOP AND BOTTOM WALL MOUNTS User manual

ROSE DISPLAYS

ROSE DISPLAYS ANOMULTI ROUND WITH CABLE CLIP AND BALL... User manual

ROSE DISPLAYS

ROSE DISPLAYS RAN-BAS-CC WITH CABLE AND SAUCER User manual

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA SQUARE WITH CABLE AND SAUCER User manual

ROSE DISPLAYS

ROSE DISPLAYS ANOKIOSK-STACKABLE User manual

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME ROUND NO LOAD WITH WALL HANGERS User manual

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME VERSAMOUNT MAGNET BASE SQ User manual

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME ROUND ASSEMBLED-MOLLY ANCHORS User manual

ROSE DISPLAYS

ROSE DISPLAYS ADVANCETRAK WITH CABLE CLIP AND CABLE User manual

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK ROUND WITH CABLE AND BALL User manual

ROSE DISPLAYS

ROSE DISPLAYS RAN-BAS-CC WITH BALL CHAIN User manual

ROSE DISPLAYS

ROSE DISPLAYS QUICKGRIP WITH CABLE CLIP AND LOOP AND... User manual

ROSE DISPLAYS

ROSE DISPLAYS SPIDER CEILING TRACK QUICK PAGE User manual

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME SQUARE WITH CABLE CLIP AND LOOP AND... User manual

ROSE DISPLAYS

ROSE DISPLAYS BUTTERFLY CLIPS WITH BALL CHAIN User manual

ROSE DISPLAYS

ROSE DISPLAYS QUICKGRIP WITH WINDOW MOUNTS User manual

ROSE DISPLAYS

ROSE DISPLAYS SUPERSNAP WITH CABLE CLIP AND CABLE AND... User manual

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK ROUND WITH CABLE CLIP AND CABLE AND... User manual

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME VERSAMOUNT WEIGHTED BASE SQ User manual

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK SQUARE NO HANGING User manual

ROSE DISPLAYS

ROSE DISPLAYS ECONOSTAND WITH ANOMULTI User manual

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK ROUND WITH WINDOW MOUNTS User manual

Popular Accessories manuals by other brands

Hillco

Hillco 2810 Operator's manual

Siemens

Siemens QSA2700D Basic documentation

Contours

Contours ZY024 manual

Saivod

Saivod VS621 manual

Virtuox

Virtuox VirtuCLEAN 2.0 user manual

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS user manual

Z-Wave

Z-Wave HSD-200Z user manual

turck

turck FMX-IM-2UPLI63FX quick start guide

Decagon Devices

Decagon Devices 10HS manual

UPPAbaby

UPPAbaby Cup Holder user manual

Elko

Elko SmartSensor Leakage Wireless manual

Grizzly

Grizzly H8371 instructions

Panasonic

Panasonic HG-T Series user manual

IFM Electronic

IFM Electronic Efector 250 Series Brief instructions

DigiDesign

DigiDesign 888/24 I/O installation guide

PROZIS

PROZIS QUAY user manual

patagonia

patagonia PSI Vest user manual

SFC Energy

SFC Energy EFOY GO! manual